Construction of Academic and Hostel building for School of Nursing in Government Mohan Kumaramangalam Medical College Hospital at Salem in Salem District

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / stone masonry in Cement mortar walls, add for every additional 3m or part there of over the initial height of 3m etc., complete complying with standard specification.

Ground floor

First Floor

Second Floor

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Dismantling RCC etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Pressed tiles & weathering course etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls AC sheet roofing without roof timbers etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Doors & windows including removal of frames, hinges and fastenings etc., complete complying with standard specification.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete

Cement Concrete 1:5:10 (One Cement, Five M- sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for flooring including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete

Supplying and filling in foundation, basement, etc with filling Crushed stone sand (M Sand) in layers of not more than 15cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed watered and consolidated complying with standard specifications.

Brickwork using Fly Ash bricks of size 230mmx110mmx70mm virtually the bricks shall be sound compact and uniform in shape free from visible cracks, warpage flaws and organic matter. The bricks shall be solid with frog on one of its bearing side. Class designation not less than 35 kg/sq. cm an average compressive strength in Cement Mortar 1:5 - (One Cement and five crushed stone sand) including neat finishing, curing etc., complete complying with standard specifications.-For Foundation and basement

Brickwork using Fly Ash bricks of size 230mmx110mmx70mm virtually the bricks shall be sound compact and uniform in shape free from visible cracks, warpage flaws and organic matter. The bricks shall be solid with frog on one of its bearing side. Class designation not less than 35 kg/sq. cm an average compressive strength in Cement Mortar 1:6 - (One Cement and six crushed stone sand) including neat finishing, curing etc., complete complying with standard specifications.

For Superstructure in Ground Floor

For Superstructure in First Floor

For Superstructure in Second Floor

For Superstructure in Third Floor

For Superstructure in Fourth Floor

For Superstructure in Fifth Floor

For Superstructure in Sixth Floor

Brickwork using Fly Ash bricks of size 230mmx110mmx70mm virtually the bricks shall be sound compact and uniform in shape free from visible cracks, warpage flaws and organic matter. The bricks shall be solid with frog on one of its bearing side. Class designation not less than 35 kg/sq. cm an average compressive strength in Cement Mortar 1:3 - (One Cement and three crushed stone sand) including neat finishing, curing etc., complete complying with standard specifications.-For foundation and basement

Brick partition wall of the following thickness in cement mortar 1:3 (one cement and three crushed stone sand)using best quality Fly Ash Bricks of size 230 x 110 x 70mm complying with standard specification etc. complete in the following floors. NOTE: Whereever reinforcement is considered necessary by the Departmental officers,hoop iron reinforcement shall be provided as directed during execution.-

For Super Structure in Ground Floor in 11.50cm thickness.

For Super Structure in First Floor in 11.50cm thickness.

For Super Structure in Second Floor in 11.50cm thickness.

For Super Structure in Third Floor in 11.50cm thickness.

For Super Structure in Fourth Floor in 11.50cm thickness.

For Super Structure in Fifth Floor in 11.50cm thickness.

Damp proof course with Cement Mortar 1:4 (One Cement and Four M-sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Supplying and Erecting, Steel Centering for sides and soffits including supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90cmX60cm and BG 10 gauge stiffened with welded mild steel angles of size 25mmX25mmX3mm for boarding laid over silver oak joists of size 10cmX6.50cm spaced at about 90cm centre to centre and supported by Casurina props of 10cm to 13cm dia spaced at not less than 75cm centre to centre at sutiable intervals etc., complete in all floors as directed by the departmental officers complying with standard specifications. The payment for centering shall be made only after the concrete laid. The retrieved materials should be taken back by the contractor.-

Plane surfaces such as RCC floor slab, roof slab, rectangular, square, Tee or Ell beam, lintels, bed blocks staircase waist slab, landing slab, landing beams, portico beams, portico slab etc.,

Plane surface such as RCC square or rectangular columns, top and bottom slab of sunshade, boxing sill slabs, etc.,

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

Providing and laying in position, standardised concrete Mix M.25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

For foundation and basement

For Superstructure in Ground Floor

For Superstructure in First Floor

For Superstructure in Second Floor

For Superstructure in Third Floor

For Superstructure in Fourth Floor

For Superstructure in Fifth Floor

For Superstructure in Sixth Floor

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three crushed stone sandand Six hard broken stone jelly). Dummy columns should be at least 1 metre height)-Super Structure in For Superstructure in Sixth Floor

Supplying, fabricating and placing in position Mild steel or Ribbed tor steel in all size for all RCC works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specifications. (The contratctor will have to make his own arrangements for the supply of MS plain rod / RTS rod and binding wire)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing in position best approved of BIS quality following dia PVC rain water down fall pipes having a pressure of 4kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete

110mm dia Fourth floor

110mm dia Fifth floor

110mm dia Sixth floor

Supplying and fixing colour galvanum sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Double charged Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Flooring with following Self design colour ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm set in Cement Mortar 1:2 (One Cement and Two m.sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with Pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M- sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works).

Supplying and fixing fine polished cuddapah slab of 20/30mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Manufacturring, supplying Casting and fixing of reinforced cement concrete pre-cast slab of the following thickness in cement concrete 1:2:4 (One cement, two crushed stone sand and four hard broken stone jelly) excluding the cost of reinforcement grill in position but including moulding charges, casting of slab, finishing, curing, and fixing the precast slab in position, in cub boards, record racks, kitchen, platforms etc., complete complying with standard specification.25 mm thick using 10 to 12mm size machine crushed hard broken granite stone jelly.

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing Leather finished granite slab Synthetic Grey, Paradise and similar varieties of approved colour for Staircase Treads and midlanding including nosing free from all defts in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 10 to 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing Double Nosing for Granite Slab with machine and as directed by the Departmental officers.

Supplying and fixing of Granite Sink of size 600 x 600 x 250mm of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,

Supplying and fixing following ornamental Burma Teak wood entrance door as per the drawings and designs approved by the departmental officers. The size of the opening is 4.80m x 3.00m. The outer frame of the doors is 150mm x 125mm Teakwood. The main door shutter opening size is 3.00m x 2.40m. The each door shutter shall have 1/3rd paneled and 2/3rd glazed of 12mm thick plain toughened glass with ornamental designs. The door shutter outer frame of size 150x50mm. The door panels shall be of 50mm thick Teakwood planks with ornamental carving designs approved by the Executive Engineer. The lock rail shall be of 200x50mm thick teakwood frame. The top of the door at a height of 600mm finished with fixed glazing of approved pattern using 12mm thick toughened glass with M.S grill. The sides of doors shall be fixed glazing of size 900x2400mm finished with 12mm thick toughened designed glass. All the door frames and fixed glazing frames are made out of 150mm x 125mm teakwood of best quality.

The door frames and shutters shall given two coats of best approved quality Malamine finish. The rate inclusive of cost of approved quality Teakwood, 12mm thick designed toughened glass, Brass hinges, Brass tower bolts, Brass aldrop, Door stopper, Brass screws, etc.. The cost includes cost of Materials, Labour charges, conveyance charges, Fixing charges, Carving charges and Glass design charges, Electricity charges and all other incidental charges etc.. All materials should be got approved by the Executive Engineer before use on works.

Supplying and fixing solid core particle board flush shutter (Double leaves) of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Supplying and fixing solid core particle board flush shutter (Single leaf) of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Supply & fixing of WPC (Wood Polymer Composite) Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter and the design is as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium.

Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4” in SS.(Sliding door)

Suppling and fixing of UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned.

Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Suppling and fixing of UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Manufacturing supplying and fixing of Single leaf steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door.

Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete

Fabricating, Supplying and fixng in position of steel sheeted windows (Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each

shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of lenght 320mm with three adjustable position.

A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete

Supplying and fixing of M.S.grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement and with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc.,

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality and approved make Indian made White glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing of Stainless steel Sink of size 1200 x 550 x 180mm including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying, laying and jointing 20mm dia CPVC pipes (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio-11 of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Internal Water supply

Supplying, laying and jointing CPVC pipes (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio-11 of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.-Above ground level. (External Water Supply)

32mm dia CPVC pipe

25mm dia CPVC pipe

20mm dia CPVC pipe

Supplying, laying and jointing 32mm dia UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.Below ground level (External Water supply)

Supplying CPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements Note: Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing PVC specials needs to be allowed

32mm dia CPVC Union

25 mm dia CPVC Union

20 mm dia CPVC Union

32mm dia CPVC Elbow

25mm dia CPVC Elbow

20mm dia CPVC Elbow

32mm dia CPVC Tee

25mm dia CPVC Tee

20mm dia CPVC Tee

32mm dia CPVC Coupling

25mm dia CPVC Coupling

20mm dia CPVC Coupling

32mm dia CPVC Nipple

25mm dia CPVC Nipple

20mm dia CPVC Nipple

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements Note: Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed

32mm dia UPVC Union

32mm dia UPVC Elbow

32mm dia UPVC Tee

32x25mm dia UPVC Reducer

25x20mm dia UPVC Reducer

20x15mm dia UPVC Reducer

32x25mm dia UPVC Reducer Tee

25x20mm dia UPVC Reducer Tee

20x15mm dia UPVC Reducer Tee

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

32mm dia Gun Metal Gate Valve

25mm dia Gun Metal Gate Valve

20mm dia Gun Metal Gate Valve

Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position 15mm dia brass SS Elbow Action Tap of size 15mm (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian

adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia

110mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75mm dia Elbow

110mm dia Elbow

75mm dia Elbow with Door

110mm dia Elbow with Door

Supplying and fixing position CI Nahani Trap of size 100 x 75mm with stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying, laying and jointing glazed stone ware pipes of 100mm dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Drilling of 150mm dia vertical bores in hard rock areas to any required depth as directed by the Departmental Officers including Laboour charges for inserting casing pipes assembling in the drilled including welding thejoints wherever necessary and grouting the casing pipe, and developing the bore etc., the rate shall inclusive of transportations chaargers for the rig and supporting vehicle from one place to another excluding cost of casing pipe etc., complete as directed by the Executive Engineer.

Up to 150 m below GL

From 151 m up to 180 m

From 181 m up to 210 m

From 211 m up to 240 m

From 241 m up to 270 m

From 271 m up to 300 m

From 301 m up to 330 m

From 331 m up to 360 m

Supply of 160 mm PVC casing pipe of best approved quality etc complete as directed by the departmental officers. The pipe should got approved by the Executive Engineer before use on works

Supplying and fixing the P.V.C. end cap of 160 mm dia at the end of P.V.C. casing pipe etc., complete complying with standard specification. The bore cap should be got approved by the Executive Engineer before use on works.

Supplying of best and approved quality of UPVC pipe of the 40mm dia including laying in the borewell and tying with copper wire etc.,complete complying with standard specification.

Supplying and erecting ISI make Submersible pump of 7.50 HP / 5.0 KW model CSM-9 with outer dia 50mm of IS 14220 specification with submersible S/D starter of 8.9 - 13.50 A rekat with 13.5 A rating and 380-415 V AC coil voltage as per specification. Providing necessary panel board with DOL bush button starter with over load relay three phase preventer indicating lamps ON/OFF switches-1 No automanual seletion switch complete as directed etc., complete.

Supplying and tying of Nylon rope of 15mm dia thread make with best quality of Nylon rope etc., complete as directed by the Executive Engineer. The Rope should be got approved by the Executive Engineer before use on works.

Supply and fixing of water proof 3 core 4sq.m. flat PVC insulated copper cable for submersible pumpset in the borewell including fixing and tying with copper wire and clamping water pipe etc., complete as directed by the departmental officers.

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes.-9" Height

Supplying and fixing of 15” height brass Emblem of Govt. Monogram approved colour including cost of all materials. Conveyance to the work site the wall / RCC member with including screws etc., complete as directed by the departmental officers.

Providing Polymer Coating (Water Proof Coating) for sunken Portion of toilet with following specification and the surface shall be cleaned to remove all dust, foreign, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred throughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

Providing and Filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc. complete.

Supplying and fixing Polycarbonate Sheet 6mm thick and steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and filling 25mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Painting over the Freshly Plastered surface as with Texture Coating of Ruff "N"Tuff material of 3mm thick for building exteior / interior in various type of finishings including surface prepration and all labour charges.

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST / EQUIVALENT.

Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT.

Supplying and erecting in position of 500 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.

The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Supplying and fixing in position of RCC Hume Pipe of 300mm dia including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

40 mm thick

25mm thick

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

CERAMIC BOARD of size 8' x 4' :(NSTWDISBD 005): Ceramic board of size :8'x4': made out of E3 grade colour 0.8 mm ceramic sheet,9mm Particle board, 0.5mm GI sheet framed with aluminium "A' Channel having provision for wall mounting & duster Tray at the bottom.

Senior Executive Table (Special type) of size: 72"x48"x 30" (TWTBL 010) : Made out of commercial plywood top sides front covering with laminated finish all around design beeding fixing one side drawer and a cupboard and other side 4 closed drawers and key board with good polish finish.

Steel duel desk (L top with book shelf) of size: 72"x39"x30" (TSDSK 002): made out of 18G CR Sheet (Book shlef) 1"x1" & 40mm x 40mm 18ERW Sq. pipe and 50x25mm 18G ERW rectangular pipe and 18mm commercial plywood with 1mm laminated finish (Desktop 1.25' & Bench top 1.25') with one coat of red oxide and two coat of enamel paint finish in etc., complete

Student half writing pad chair (TSCHR 020): made out of students hall writing pad chair with cushion seat and back with bottom shelves in etc., Complete

Steel Table of Size 42" x 24"x30" (TSTBL004): made out of 18SWG CR Sheet 1" ERW square pipe 18SWG, with three drawers or one drawer with cabinet L top with one coat of primer and two coat of enamel paint finish in etc., complete

S type chair with wood frame nylone wire knitted seat & back with arm.(TSCHR 002): Made out of 1" round ERW pipe 14G pipes with one coat of red oxide and 2 coat of olive green enamel paint finish.

Computer Revolving chair with cushion seat & Back with fabric/ rexin finish.(TSCHR 009): Made out of steel Computer Revolving Chair 5 Prong metal base and 20mm type caster wheel push back arrangement and ABS back 40 density 50 mm thick mould foam cushion seat and back of upholstey cloth and height adjustment arrangement with pu arm

Computer Table Special type of size : 48"x21"x30" (TWTBL 012) : Made out of 18mm plywood as per IS 303/1989 and 1mm laminated as per IS 2046 finish one drawer 14" telescopic channel keyboard, one drawer and CPU provisions and lock with all around TW design 20x10mm, 35x15mm Beeding fixing and good polish finish in etc., complete

Steel rack (Open Type) of Size 75" x 33" x 18" (TSRCK 001) Made out of 18 G CR Sheets 37 x 37 x 3 mm MS angle having 6 fixed shelves forming 5 Compartments with one coat of red oxide and two coat of olive green enamel paint finish

Steel library rack of size 76" x 36" x 18" (TSRCK 003) Made out of using 40 x 40 x 5 5/6 mm ms and 18 G CR Sheet angle having 6 trsys + 1 top cover, both sides open with one coat of red oxide and two coat of enamel paint finish

Steel book case cup board of size : 66" x 33" x 12"(TSCUB010) made up of 20G,16G CR sheet, 3Shelves forming 4 compartment with 4mm plain glass doors with one coat of redoxide and 2 coat of enamel paint finish

READING TABLE OF SIZE:1.8m X 0.9m X 0.75m (DIMENSION IN m) (NSTSTBL 1387): reading table made out of 32mm ERW sq , 19mm BWP Plywood, 0.8mm Laminate finish on both inner and outer side for L top with good paint & polish finish 1.8m x 0.9m x 0.75m ((DIMENSION IN m)

Rectangle corner rounded shape conference table with centre glass top of size:8' x 4' x 2'6"(NSTWBL 1996): Manufacturing and supply of rectangualar corner roundshape conference table with centre glass top of size:8' x 4' x 2'6" made out of 18mm, 12 mm commercial ply wood as per IS:303/1989, 12mm flexible plywood 1mm glossy lamination sheet with teak wood moulding with good polish finish conference table

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way one module switch with module front plate with frame and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (4 points/Coil) (Higher End) (DATA-1)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with frame and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points/Coil) (Higher End) (DATA-2)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with frame and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End. (DATA-2)

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with frame and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End. (DATA-3)

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End. (SD-464)

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (SD-526)

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (SD-528)

Supply and fixing of 4 feet LED Single Box type fitting (Higher end make) complete with TW round blocks on wall or ceiling with 4'18W crystal glass LED tube light with PVC unsheathed Copper leads from the terminals to the fitting. (DATA-1)

Supply and fixing of WT bulk head fitting with suitable guard with 9W LED Bulb (Higher End). (DATA-2)

Supply and fixing of 7W/9W LED Bulb for BH Point (Higher End) (DATA-3)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (SD-535)

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour. (SD-543)

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch. (SD-105)

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp. (DATA-)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD-114)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan. (SD-120)

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End. (SD-476)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End. (SD-488)

Supply and fixing of 32 A DP MCB in 2way sheet steel enclosure in flush with wall and earth connection. (DATA-4)

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (SD-140)

Supply and fixing of 63A FP MCB with 63A 30mA FP ELCB in 8 module weatherproof enclosure in flush with wall and making good of the conealed portion with earth connection. (Higher End) (DATA-5)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-601)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-613)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 2 nos. 10A SP MCB and 2 nos. 10A DP MCB as outgoing in flush with wall with earth connection only. Higher End (DATA - )

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. i. 63A 4P MCB - 1 no ii. 63A 4P 30mA ELCB - 1 no iii. 63A DP MCB Isolator - 3 no iv. 6A to 32A SP MCB - 12 no (SD-714)

Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD-166)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD-414)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour. (6A/16A Power Plug, 20A AC Plug and 32A DP MCB enclosures) (SD-57)

Supply and run of 2 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.[SD-59] [For 8W SPN MCB DBs and 12W SPNMCB DBs]

Supply and run of 4 of 16 sq. mm (101/0.45) PVC insulated S.C unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(4W 7S TPNMCB DBs, 63A MCB Enclosure) (DATA-11)

RISING MAIN COPPER:Supply erection, testing and commissioning of 400A 3L+N+PE, Plug in TYPE, 415V 3 Phase and Neutral sandwich Copper bus bar rising main (Rated to 250A) indoor type totally dust and vermin proof with Insl F with suitable GI enclosure of 1.6mm thickness with epoxy painting of RAL7032. Rising main shall be provided with double copper earth bus bar of capacity as per norms for the entire length and cost of earth bus bar shall be included. short circuited rating of 50KA for 1sec. The detailed drawing shall be approved by the department before manufacturing. [Make: CPRI approved make] (As per Qtn rate)

Supply, Erection, Testing and commissioning of 400A END Feed unit with 400A 4P MCCB 50kA for 400A Rising mains. (As per SR Rate)

Supply and fixing END cover for 400A Rising main (As per Qtn rate)

Supply and fixing of rigid hanger for 400A rising main. (As per Qtn rate)

Supply and fixing of spring hanger for 400A rising main. (As per Qtn rate)

Supply and fixing of Wall support hanger for 400A rising main. (As per Qtn rate)

Supply and fixing of Flange end for 400A rising main. (As per Qtn rate)

Supply, Testing and commissioning of tap of boxes of the following rising main including interconnecting rising main of 100A 4P MCCB suitable for terminating with 3.5C x 50 sq.mm cable (Schneider / Legrend Make) (As per Qtn Rate)

Supply and fixing of Horizontal Bend / Vertical Bend. (As per Qtn Rate)

Supply and fixing of Horizontal Offset / Vertical Offset / Combination Elbow / T Elbow (As per Qtn Rate)

Supply and fixing of 250 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD-740)

Supply and Laying of 3½ x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-754) (For EB supply, Change-over and to Rising Mains)

Supply and clamping of 3½ x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-230)

Supply and fixing of brass cable gland for 3½ x 240 sq.mm. PVC armoured LTUG cable with earth connection. (SD-194)

Supply and providing cable end termination of 3½ x 240 sq. mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (DATA- 6)

Supply and Laying of 3½ x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-752) (For Generators)

Supply and clamping of 3½ x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-228)

Supply and fixing of brass cable gland for 3½ x 150 sq.mm. PVC armoured LTUG cable with earth connection. (SD-192)

Supply and providing cable end termination of 3½ x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-241)

Supply and clamping of 3½ x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (for 100A panels) (SD-224)

Supply and frxing of brass cable gland for 3½ x 50 sq.mm. PVC armoured LTUG cable with earth connection. (SD-188)

Supply and providing cable end termination of 3½ x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-237)

Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-746) (for lift and Pump room)

Supply and clamping of 3½ x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-222)

Supply and fixing of brass cable gland for 3½ x 25 sq.mm. PVC armoured LTUG cable with earth connection. (SD-186)

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-235)

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.. (For Street light post) (SD-744)

Supply and clamping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (For Street light post) (SD-220)

Supply and fixing of brass cable gland for 4 x 10 sq.mm. LTUG armoured cable with earth connection. (SD-182)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD-458)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/ supports on wall/ floor/ ground for earth connection. (SD-76)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-233)

Supply and erection of 100Amps Capacity dust and vermin proof floor mounting cubical panel board of suitable size fabricated out of 16 SWG MS sheet for outer body,stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and switches placed in two horizontal rowson both sides of bus bar chamber with cable adapter chamber at the top and bottom with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the latest CEIG rules with the following switches confirming to IS specifications.

1)100A TPN switch disconnector fuse interior only with HRC fuses double break - 1 No OUTGOING 2)63A TPN switch disconnector fuse interior only with HRC fuses double break - 4 Nos 3)32A TPN switch disconnector fuse interior only with HRC fuses double break - 2 Nos The bus bar chamber should have 4 Nos of 1" x 1/8" tinned copper flat for 3 phases and Neutral and body should have 1"x1/8" tinned copper flat for earth bus must be run all round the panel to provide earth connection to the cubicle switches cable glands etc., the bus bars should be supported on synthetic enamel compound at equal internal as per IS specification. The 100A switches should be connected with the phase and neutral buses with 1"x1/8" tinned copper flat, 63A and 32A switches should be connected with the phase and neutral buses with No.8 SWG tinned copper rod . Each switch should be connected with 2nos of earth bus with 2runs of No.8 SWG rigid tinned copper rod with suitable lugs. Phase and neutral copper buses should be tinned properly.

Supply, erection testing, commissioning and handing over of 1No, 125KVA diesel generator set with auto main failure (AMF) panel of 0.8P.F, 3phase, 415v/420 Volts, 50c/s, 1500 RPM latest CPCB approved capacity complete in all respects as detailed below

A.Engine

Water cooled diesel engine suitable for generator application with a shaft out put of 155 BHP suitable at 1500 RPM under NTP conditions as per BSS 5414-ISO 10000. The engine shall comprise the following standard scope of supply:

1) Dry type Air cleaner

2) Expansion bellow

3) Radiator, radiator fan and mounting

4) Air to air charge cooler

5) Exhaust gas turbo charger

6) Lube oil cooler and lube oil filter

7) Fuel filter (pre and micro)

8) In-line mono-block fuel injection pump with governor and fuel feed pump

9) Electronic governor

11) 12V / 24V Volt electric starter motor

12) Engine test certificate

13) Residential Mufler

14) Fly wheel with starter ring.

Engine instrument panel/ mounted

Engine control panel consisting of ON/Off/Start/Key,lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator.

Safety system of Engine:

The engines shall trip for the following conditions with Visual alarm device. 1) Low lubricating oil pressure. 2) High water temperature.

3) Vee - belt failure and over speed. 4) Low battery indication The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.

B. ALTERNATOR

Alternator capacity of 125KVA, 100 KW AC 3phase, 50HZ, 415 Volts, 0.8P.F, 4 wire self exited, self regulated design to run at 1500 RPM under NTP conditions conforming to BS 5000/IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate.

3) AMF CONTROL PANEL:

The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connection of incoming and outgoing leads having been made on the control panel.

6) 1No Frequency meter 7) 1No KWH meter 8) 1No power factor meter

Note: This will be in addition to the auxiliary neutral contactor for battery charging alternator fitted to the Engine.

11) 1set Air break contactor with auxiliary neutral contactor for main supply

12) 1set low voltage HRC fuse for the short circuit protection of the main supply. 13) 1set alternator contactor with auxiliary neutral contactor 14) 1set three pole bimetal release for over load protection of the alternator

15) 1set low voltage HRC fuse for the short circuit protection of the alternator

16) 1set DC control relays incorporating engine start/stop and failure to start/lockout

18) 1No push button “Start”

19) 1No push button “Stop”

20) 1No push button “Reset”

21) 1No signal lamp for indicating load on mains

22) 1No signal lamp for indicating load on set

23) 1No signal lamp for indicating set fails to start

24) 1No signal lamp for indicating ‘Set running’

25) 1No signal lamp for indicating ‘Battery charger ON’

26) 1set pilot lamps of 3Nos

27) MCCB of 200A capacity with magnetic thermal over load release, instant short circuit trip and under voltage release switch.

28) Rectangular copper bus bars (1No for each phase, neutral and earthing terminal) of adequate capacity duly colour coded with heat shrinkable PVC sleeves.

29) 1No mains voltage monitor

30) Hooter/Audio alarm for indicating set fails to start and for DG O/L

31) 1set timers

32) Audio and visual indication arrangements for

a) Low lubricating oil pressure

b) High water temperature

c) Over speed

33) 1No Earth fault relay

34) Isolator to Isolate the neutral

1. The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements.

2. The engine should trip for the following conditions.

a) Low lubricating oil pressure

b) High water temperature

c) Over speed

4) ACOUSTIC ENCLOSURE:

Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet.

The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm powder coating done after seven tank surface preparation process of sheet metal.

Canopy panel and door shall have inside lining of FIRE-RETARDANT 64kg/m density mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy.

The maximum permissble sound pressure level should be as per the norms prescribed by the Central Pollution Control Board / State Pollution Control Board/ Competent Authority concerened or should be with in 75 db(A) at 1 meter from the enclosure surface whichever is advantageous to the department.

The emergency stop should be available on the enclosure panel.

The enclosure provided shall be duly approved by the Engine Manufacturer of the Engine provided for Diesel Generator Sets mounted inside and should be to the satisfaction of inspection / testing authority concern.

SURFACE TREATMENT – PAINTING

The enclosure shall be suitably treated for degreasing, de-rusting and phosphating. The canopies are passed through seven-tank treatment thoroughly.

ADDITIONAL FEATURES OF CANOPIES

Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any.

WORLD CLASS COOLING PACKAGE:

Canopies shall have cooling package for which it can perform at 45 deg c/ ambient temperature. No grounding required on the ground, only a level surface capable of with standing the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set.

The Gen set frame shall also be provided with hooks for unloading.

Temperature rise inside the canopy:

Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well with in 5-7 deg centigrade.

5) Base Frame

Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM.

The base frame shall have provision for mounting of acoustic enclosure on it. DG Set should be offered complete with exhaust piping, ie, silencer is mounted and connected by means of MS pipe through flexible pipe to the engine manifold. Entire exhaust piping inside the conopy (Cold Zone) is insulated by means of ceramic wool and aluminium gladded The supply of Gen set includes loading, unloading and transportation charges.

6) Fuel Tank

200 Ltrs. Removable Fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet an outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. First charging of fuel oil to full capacity and first charging of battery while handing over to dept.

7) Battery

2Nos 12V 180 AH battery

8) Tools

Supply tools such as 15" cutting plier - 1 No

Screw Driver 9" & 6" - 2 Nos,

DE Spanners (6 Nos) - 1 Set

Adjustable Spanner - 1 No

1/2 lb Hammer - 1 No

Spanner fer removing engine oil plug - 1 No

Line Tester - 1 No for the maintenance and operation of generator.

ERECTION , TESTING AND COM-MISSIONING Providing suitable concrete foun-dation with cement concrete 1:2:4 with sand cushion all around the foundation for erection of 125KVA Diesel Generator set upto a height of 3ft from the floor level.

Exhaust Piping: Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to exlend outside the generator with necessary thermal insulation. (SR)

Supply and demonstration of the following safety accessories. a)1 meterx1 meterx1/2 inch 11kv rubber mat-2 nos. b) one set of 4 nos. 9 liters fire buckets with metal stand frame - 1set c) first aid box with medicine - 1no d) 11 kV rubber hand gloves - 2 nos. e) 2 Kg capacity dry powder type fire extinguishers - 2 nos f) Hand operated pump to transfer fuel from standard barrel to fuel tank - 1 no. g) First aid chat in Tamil and English - 1no. h) Battery water acidity tester -1 no. i) Earth discharge rod - 1 No j) Danger board - 1 No k) PL Lamp - 1 No

Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing for Electrical Installation, 4Nos-Lift, 2 Nos Generator Set and payment of CEIG inspection fees Complete.

Design, Engineering Supply, fabrication, erection, testing, Commissioning and handing over of 1 No. 8 persons capacity Passengers Lift (Gear less) with machine room as per following Technical Specification. 1. Type of Lift : Passenger lift. 2. Capacity of Lift : 8 Persons / 544 Kg. 3. Speed : 1.00 Metre / Sec. 4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions. 5. No. of Floors : Ground + 5 Floors. 6. Total Travel : 18 Mtr 7. Levelling Accuracy : High Level accuracy with smooth & Jerk free stopping. 8. Construction of Car : High quality and suitable thickness S.S. Car and M.S. False ceiling. 9. Position of Machine : Directly above the lift shaft. 10. No. of Landing Entrance : One in front only. 11. No. of Car Entrance : One in front only. 12. Car Entrance Door : Power operated V3F drive centre opening sliding S.S. doors with VF operation.

23. Emergency Alarm Bell : Battery operated alarm bell with automatic charging device. 24. Emergency light : Battery operated light with automatic charging device. 25. Fireman’s Switch : Include in Ground Floor. 26. Scaffolding : Included. 27. M.S.Sill angles and facia plates : Included. 28. Steel for lift machinery : included. 29. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year. And comprehensive servicing and maintenance of the lift for further period of 2years beyond the free warranty period of 1year from the date of commissioning of lift should be done by the contractor. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure.

This shall consist of suitable type of battery system with charger, inverter, under voltage protection system etc, complete with all accessories. 31. Provision of intercom with phone (press & speech): To be provided in the ground floor & machine room. 32. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any and obtaining CEIG safety certificate as per lift act. 33. Floor announciator with music. Included. 34. Special Feature: (a). Infra red door sensor with full height screen. (b). Stainless steel signal fixtures. (c). Vandal proof button with S.S. cover. (d). S.S door frames for landing doors. (e). V3F Door operator. (f). Call register signal. (g).Stainless steel facia plate for car operating panel and landing fixtures. (h). ON - OFF Switch for fan and light. (i). Over load warning indicator with Voice Announciator. j) full width half height rear panel mirror. k. S.S. Hair line finish Hand rail in car. l) Steel ladder in lift machine room and in lift pit.

35. Lift Duty motor of adequate capacity, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffers electro machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limit switch, main suspension ropes, counter weights, lifting joist for mounting the machineries. 36. Site testing in accordance with IS 14665 should be carried out at the time of handing over.

37. Guarantee: Guarantee at leart for one year for the materials and work manship of equipments should be offered by the lift contructor. 38. Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided. (Johnson/kone/OTIS) (SR)

Design, Engineering Supply, fabrication, erection, testing, Commissioning and handing over of 1 No. 10 persons capacity Passengers Lift (Gear less) with machine room as per following Technical Specification. 1. Type of Lift : Passenger lift. 2. Capacity of Lift : 10 Persons / 680 Kg. 3. Speed : 1.00 Metre / Sec. 4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions. 5. No. of Floors : Ground + 5 Floors. 6. Total Travel : 18 Mtr 7. Levelling Accuracy : High Level accuracy with smooth & Jerk free stopping. 8. Construction of Car : High quality and suitable thickness S.S. Car and M.S. False ceiling. 9. Position of Machine : Directly above the lift shaft. 10. No. of Landing Entrance : One in front only. 11. No. of Car Entrance : One in front only. 12. Car Entrance Door : Power operated V3F drive centre opening sliding S.S. doors with VF operation.

23. Emergency Alarm Bell : Battery operated alarm bell with automatic charging device. 24. Emergency light : Battery operated light with automatic charging device. 25. Fireman’s Switch : Include in Ground Floor. 26. Scaffolding : Included. 27. M.S.Sill angles and facia plates : Included. 28. Steel for lift machinery : included. 29. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year. And comprehensive servicing and maintenance of the lift for further period of 2years beyond the free warranty period of 1year from the date of commissioning of lift should be done by the contractor. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure.

This shall consist of suitable type of battery system with charger, inverter, under voltage protection system etc, complete with all accessories.

31. Provision of intercom with phone (press & speech): To be provided in the ground floor & machine room. 32. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any and obtaining CEIG safety certificate as per lift act. 33. Floor announciator with music. Included. 34. Special Feature: (a). Infra red door sensor with full height screen. (b). Stainless steel signal fixtures. (c). Vandal proof button with S.S. cover. (d). S.S door frames for landing doors. (e). V3F Door operator. (f). Call register signal. (g).Stainless steel facia plate for car operating panel and landing fixtures. (h). ON - OFF Switch for fan and light. (i). Over load warning indicator with Voice Announciator. j) full width half height rear panel mirror. k. S.S. Hair line finish Hand rail in car. l) Steel ladder in lift machine room and in lift pit.

35. Lift Duty motor of adequate capacity, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffers electro machanical door locks, emergency key, side supporting angles motor over load protection

devices. Final limit switch, main suspension ropes, counter weights, lifting joist for mounting the machineries. 36. Site testing in accordance with IS 14665 should be carried out at the time of handing over.

37. Guarantee: Guarantee at leart for one year for the materials and work manship of equipments should be offered by the lift contructor. 38. Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided. (Johnson/kone/OTIS) (SR)

Supply, Fabrication, Erection, Testing and commissioning of indoor dust and vermin proof four compartment CT Metering panel made up of 16SWG CRCA sheet of size 48" x 48" x 18" with necessary stiffner and provided with following arrangements. 1. Front open door for each compartment provided with sealed locking arrangement. 2. 6mm thick hylam sheet in metering compartment for fixing 3phase 415V 4wire 50Hz Digital Energy meter provided by TANGEDCO. 3. 3Nos 1.5" x 1/4" and 1" x 1/4" Copper bus bar on suitable bus support with 3Nos 315/5A CTs in bus bar compartment. 4. 3Nos 315A fuse unit & 1no 250A neutral link on 6mm thick hylam sheet in fuse comparment. 5. Fixing of control fuses and wiring with flexible PVC copper wire and LED Indicator arrangements.

6. 2Nos copper earth bus of 1" x 1/8" in the rear side. 7. Suitable MS base channel for mounting. 8. Viewing glass in the door for meter compartment. 9. Provision of cable entry and outgoing compartment.10. Painting the panel with 2 coats of epoxy paint over one coat of red oxide (DATA-17)

Supply and fixing of 3 phase 315 A aerial fuse unit for 3Nos. 315A fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps. (DATA-10)

Supply, Erection, testing and Commissioning of 2.0TR (6000K cal / hr) ABS plastic split Inverter type Air conditioner confirming to IS 1391 [part 2] 1992 with Rotary compressor operating on Non CFC refrigerant suitable for wall mounting for operation on 230V, 50 HZ single phase AC Supply as per BEE Specification and capable of performing the following functions. (A) Cooling (B) Dehumidifying (C) Air Circulating. (D)Filtering.

The installation work for the above split type AC units includes the following.

1. Mounting / fixing indoor and outdoor units at their respective locations.

2. Laying refrigerent pipe line of 6mtrs. distance, both units after drilling hole / holes in the wall if required. Thickness of the copper tubing shall not be less than 0.7mm.

3. Installing the suction pipe with expanded polythene foam 5mm thick tubing.

4. Laying 15mm dia flexible PVC drain pipe of 6mts. Length to throw out the condensate water being formed in the indoor unit.

5. Leak testing the entire gas unit.

6. Charging refrigerant gas in the unit.

7. Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor and outdoor units up to 4mtr. length and up to switch within the 3 mtrs. of location of indoor unit. (Blue Star, Voltas, carrier make only) (SR)

Supply and Erection of 5 KVA Voltage stabilzer for 2 TR split type AC unit high / low voltage cut off time delay relay with input voltage cut off time range of 170V - 270V and output range of 200 - 240V with 3 minutes time delay relay (SR)

Supply and fixing of 5/8" Copper Pipe and 3/8" Copper Pipe for connecting the Indoor and outdoor unit with insulating the copper tubes with thermal insulation above the standard length. (SR)

Supply and Fixing of Angle iron stand for outdoor split A.C unit. (SR)

Supply, erection, Testing, Commissioning and Handing over of 500LPD Solar Water Heater with the following components.

A)TANK&EVACUVATED TUBE COLLECTOR,HEATER 500LPD-1SET: The tanks are generally made of Inner tank and outer cladding cover. The inner tank made of SS 304 grade/MS or any other materials with anticorrosive coating. For SS inner tank thickness may be min. 1mm when

using argon arc or metal inert gas for welding & 1.6mm when using other type of welding. For M.S. and other material, it will be above 1.5mm. No leakage under any kind of negative or positive pressure of water shall be ensured. Capacity of the tank not less than 500 litres. Minimum 50mm thickness of CFC free PUF having density of 28-32 kg/cu.m. In case of higher density insulations, the thickness may reduce proportionately. Aluminum/FRP or GI powder coated outer cladding may be used. M.S may also be used with special anti-corrosive protective coatings; Thickness of sheets will be strong enough to avoid any deformations of the cladding. Size of the tank OD 240mm and length is 2020 mm.Tube length 1800mm,Outer tube diameter 58mm,Inner tube diameter 47mm,Glass thickness -1.6mm,Transmission coefficient-0.89,Reflection coefficient -8.4%,Absorption coefficient-86%,vaccum Pressure -5.0Pa,Average heat loss coefiicent -0.85w/m2,minimum 40Nos of ETC Tubes to be used.

(B) MOUNTING STRUCTURE OF STORAGE TANK: Supply, Installation & commissioning in position of the hot water storage tank will be mounted on fixed metallic structures of adequate strength and appropriate design, which can withstand and high wind velocities up to 150 km per hour. The support structure will be MS powder coated. The "Mounting Structure" should have the following features: i) The support structure shall be mild steel, powder coating (120 micron) iron for holding the storage tank. The size of angle iron should not be less than 35x35x5 mm, ii) Each structure shall be so fabricated as to be placed on roof on its legs. It will withstand severe cyclone or storm with the speed of 150Km/Hr iii) All nuts and bolts should be made of very good quality and should be corrosion resistant,

iv) The structure should be designed to allow easy replacement of TankC)Mounting Structure for evacuvated Tube Collect Header 1Sets structur should be designed to allow easy replacement of any module.Supply,Installation & commissioning in position of Evacuvated tube collector will be mounted on fixed metallic structures of adequate strength and appropriate design,which can withstand load of tubes and high wind velocities upto 150 km per hour. The support structure used will be MS powder coated the Mounting Structure should have the following features:i)The support structure shall be mild steel powder coating iron for holding the evacuvated tube collector.The size of angle iron should not be less than 25x25x5mmii)Each structure shall be fabricated as to be replaced on roof on its legs.It will withsatnd severe cyclone or storm with the speed of 1500Km/hr

iii)All nuts and bolts should be made of very good quality and should be corrosion resistant. iv)The structure should be designed to easy replacement of any ETC Tube (As Per Qtn Rate)

Supply and clamping of 1inch UPVC pipe line with suitable bends/ Tee connectors, clamps, fasteners etc for cold water line. (MR)

Supply and clamping of 1inch CPVC pipe line with suitable bends/ Tee connectors, clamps, fasteners etc for hot water line. (MR)

Supply and fixing of 1inch SS Gate valve with CPVC Union connector for hot water outlet.(As Per Qtn Rate)

Supply and fixing of ½inch BSP Nickel Coated Brass hot water tap for hot water outlet with necessary CPVC reducers.

Supply and laying of UTP Cat6 cable concealed in 16 mm PVC rigid pipe in the wall/ceiling with necessary connection. Make:Finolex/ Dlink /equivalent. DATA-A

Supply,Installation and termination of RJ 45 Cat-6 IO connector,Back box,face plate with surface mount. Make: D link/ Legrand/ Equivalent. DATA-B

Supply of Cat 6 UTP Patch cord of 1 metre.Make:Finolex/Dlink /equivalent (SR)

Supply of Cat 6 UTP Patch cord of 2 metre.Make:Finolex/Dlink /equivalent (SR)

Supply and installation of 24 port Gigabyte 10/100/1000 Mbps LAN Network switch (Higher End) with 24 port jack panel (Fully loaded) and necessary accessories.Make: Netgear/ Cisco / equivalent. (DATA-C)

Supply,Installation of 6U MSRack for housing Audio, Video equipments with necessary power Distribution unit,fan with glass Door fitted at the top and Lock and Key facility. (DATA-D)

Supply and Installation of Wi-Fi Router with 10/100/1000 Mbps fast Ethernet ports autosending technology. Make:Netgear/TP-Link / D link/ equivalent. (MR)

Supply, fixing and testing of 1 KVA online UPS with DC Voltage 36V with one hour backup,Power Factor ≥ 0.99 @ full load and Exide Powersafe Plus SMF battery: 12v - 65AH in 3 Nos and one layer wooden/steel fabricated stand.Make and Model:APC / Microtek . (SR)

Supply and installation of high fidelity 2-way wall speaker system with 30 W and frequency response of 80-20,000Hz. Make and Model:Bosch//equivalent. (SR)

Supply and installation of 240W amplifier which operates on AC& DC power with 7 Mic & 2 Aux Inputs,output taps of 4& 8 ohm,70V & 100V and frequency response of 50-15000Hz.IN Built Digital Player MP3 Player with USB SD and MMC Card Reader.Make and Model: Bosch/Ahuja Equivalent. (SR)

Supply of microphone which consists of goose neck microphone with ON / OFF switch, indicator Heavy duty base, and Phanthom supply with 15 Metre Cable.Make and Model : Studio Master Flex 4 / equivalent (MR)

Supply and installation of wired Dynamic Vocal Microphone With Frequency Response 50 to 16,000 Hz Output Impedance 150 Ω and Floor stand. Make and Model : AhujaAUD-98XLR with DGN / Equivalent. (MR)

Supply and installation of Handheld/ Collar type wireless perceptional microphone with wide frequency response of 50-16,000Hz and receiver.Make and Model: AKG/Shure. (MR)

Supply and fixing of 230 V operation 1 KVA Voltage stabilizer with manual regulator audio equipments Make and Model: Studio master/SVC 1000/ equivalent. (MR)

Supply and installation of 4k UHD 65" Interactive flat panel Display With Android OS consists of 1428.48 x 803.52 of Display Area, 16:9 Aspect Ratio, Android 11 05 Type-ADS , 8ms Respones time, 3840x2160 Resolution, Viewing Angle 178 Degree (H/V), 30000 Hours Life Time, I/O PORTS -HDMI IN-3, HDMI OUT-1, USB 2.0-1, USB 3.0-4, VGA in -1, AUDIO in-1, and USB Type-C-1, Touch 2.0-2 and Fixing arrangements Make and Model : Uniq/Logic/Equivalent. (MR)

Supply and run of 2 core 1.5 sq.mm Copper cable in 19mm PVC pipe of 1.8mm thickness concealed in wall/ceiling with necessary connections and making good of the wall with suitable paint . (DATA-F)

Supply and installation 12U three tier MS Rack for housing Audio Video Equipments with necessary power distribution unit,cable manager,fan and Lockable Toughened Glass Door. (DATA-G)

SRI NAACHIMAAR ENGINEERING CONSTRUCTIONS

BHAKIYA ASSOCIATES