Renovation of JSSC Building Ground Floor to Second Floor at Namkum, Ranchi

Amount

Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I.

Providing and laying water proofing treratment to vertical and horizontal surface of deprressed portions of W.C.Kitchen and the like consisting of (I)Ist course of applying cement [email protected]/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface(ii)IInd course of 20mm cement plaster 1:3(1cement:3coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface(iii)IIIrd course of applying blown or residual bitumen applied hot at 1.7kg per sqm of aarea(iv)IVth course of 400 micron thick PVC sheet,(overlaps at joints of PVC sheet should be 100mm wide kand pasted toeach other with bitumen @1.7kg/sqm)

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing designation 75 A brick work in C.M. (1: 4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for kitchen platforms, vanity counters windows sills, facias and similar locations of required size approved shade,colour and , texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite Stone slab of colour black,chrry /Ruby red ,area of slab over 0.50sqmm

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white Tiles.

Providing and laying rectified glazed ceramic wall tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown ,laid on 20mm thick bed of cement mortar 1:4(1cement:4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

covering of treated surface with P.C,C .Providng 50mm thick cemet concrete M20(1:1.5:3)maintaining slope in alternate 2mtx2mt panels with approved quality of stone chips of 20mm to 6mm sizie graded and cleaned sand of F.M 2.5 to3 includig screening,shuttering and mixingcement concrete in mixer with admixture of integral water proofing and placing in position,striking curing,taxes and royalty all complete as per buidings specification and direction of E/I.panels that has been left should be casted next day.there should be 6mm gap between panels Brand sika plastocrate plus,MYK proof WP 10,,Fosroc-conplastx4211C,Dr.Fixit pidiproof LW+or equivalent.

Providing 12mm thick water proof cement plaster(1:3)with clean coarse Isand F.M 1.5with integral water proofing compound liquid @125ml per bag cement including screening,curing with all leads and lift of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I. Brand-Fosroc-conplastX421C Sika-plastocrate plush, Dr fixit pidiproof LW+,MYK proof WP 10 or Equivalent.

waterproofing for old and new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foollwing steps:-

a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials,labour,tools complete ponding test to be done after plugging all outlets and to be checked from soffit to indentify seepage,leakage.On indentification of seepage,cement grouting to be done with non shrink expanding admixture of sika India Pvt.Ltd/MYK schomberg/Dr.Fixit/Fosroc or equivalent.Providing and reparing of all conners and joints such as those between the parapet wall and the roof slab etc.shall be chamfered with 150mmx150mm fillet of mortar cement sand 1:4) admixed with acrylic polymer of sika/Fosroc/MYK schomberg/Dr.Fixit or equivalent.Before chamfering a prime coat shall be given with the using of arcylic polymer Reparing surface irregularities,damaged concretein base slab,dead cracks if any,with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement shurry including all materials,labour tools commplete.

(b)Ist coat-Applying Ist coat of two component acrylic modified ready to use flexible cementitious mataerials on surface saturated dry roof and in side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layer is still green,Ist coat should be applied @ 1.5kg/sqmt/coat.For the purpose of measurement the entire treated surface will be measured.-

(C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready use Flexible cementitious materials right angle to the Ist coat over the glass fibre laid surface,2nd coat should be applied @ 0.7kg/sqmt/coat .For the purpose of measurement the entire treated surface will be measured.After three days of drying the 2nd coat,The rain water outlets to be plugged and ponding test to be done for 48 hours to indentity seepage,leakage from soffit and if found necessary rectification to be deon as per satisfaction of E/C.The waterproof coating to be protected from damage before screed over it.Water proofing coating to be protected from damgae before screen over it.Water proofing Brand sika Topseal 109hi/Fosroc Brushbod RFX/Dr fixit pidiffin 2K/MYK Aquafin TG.Product performance chemical,Base part A,Acrylic copolymer,PartB-specially graded cementtitious powder Density 1.6 kg/1(,mixed density) at + 27°C-Tensile strength-2N/mm2 after 28 days(with Fibre cloth)(According to ASTM D 2370)Pullout Bond strength-2N/mm2(concrete failure)(According to ISO 4624)Slant shear Bond strength-4N/mm2(According toFIP 5.15) Elongation at Break-35# without Fibre cloth and 20% with Fibre cloth(According to ASTMD 2370)

(d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm /50mm PCC of M-20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in allernatepenels of 2mtx2mt keeping 6mm gap between the panel joint Integral water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete (paid separately for this items) All corners shall be chamfered with 150mm fillet.The rainwater outlets shall be just leveled with screed concrete to ensure smooth discharge of water-The peripheral gaps between Pvc pipe outlet and concerte surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika India pvvt.Ltd/MYK.schomberg/Dr.Fixit/Fosroc.For the pupose of measurment the entire treated surface will be measured;

(e) Groove of PCC surface should be filled with polysulphide sealant(paid separately)Brand-sika India Pvt Ltd/MYK schomberg/Dr.Fixit/Fosroc warrantly for five years.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

75mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

75mm dia

shoe(plain)

75mm dia

110mm dia

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete.

75mm dia

110mm dia

Providing and fixing factory made single extruded WPC(wood polymer commposite)solid door/window/ceosetorywindows & oather frames/chowkhat comprising of virgin PVC polymer of K value 58-60(suspension Grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk)and non toxic additives(maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having miniumu frame density of 750kg/cum and scew withdrawal strength of 2200N(Face)&1100 N(Edge),minimu compressive strength 50N/mm2,modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/ S.Sdash fastenders of required dia and length complete as pr direction of E/I(M.S.hold fast/lugs or SS dash fassteners shall be paid for separately).,(Note -WPC solid doors/window frames,minus 5mm tolerance in dimensions i.e.depth and width of profile shall be acceptable variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made( frame size 45x70mm)

Providing and fixing factory made single extruded WPC(wood polymer composite)solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60(suspension Grade),calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800B(Face)&900N(Edge) minimum comprressive strength 50N/mm2,modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with properly of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt higes of rquired size with necessary full body threaded star headed counter sunk S.S.screws,all as per direction of E/I(note-stainless steel buitt hinges and necessary S.S.screws shall be paid separeately) 35mm thick.

Providing fixing pressed steel door frame conferming to IS:4351 manufactured from commercial mild steel sheet of 1.60mm thickness including hinges,jamb,lock jamb,bead and if required angle threshold of mild steel angle section 50x25mm or base tiles of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means including M.S.pressed butt hinges 2.5mm thick with mortar guards,lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as direction of E/I. Profile-B,Fixing with cwih adjustable lugs with split end tail to each jamb)

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over New wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Providing and fixing wooden moulded beading to door and window frames with iron screws,plugs and priming coat on unexposed surface etc.complete.

2nd class teak wood 50x20mm

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting and . fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc

15mm nominal outer dia pipes

25mm dianominal outer dia pipes

32mmdanominal outer dia pipes

Providing and fixing Granite Stone of approved shadestone slab with table rubbed, edges rounded andpolished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embeddingthe stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)as per direction of Engineer-in-charge and finished smooth white Agaria Marble stone..

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling and dash fasteners to be paid for separately)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)

Providing and fixing panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves orrebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick particle Board 12mm thick pre-laminated particle board with decorative lamination on one side and balancing lamination on other side,Grade I,Type II IS: 12823 marked)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and asdirected by Engineer-in-charge.

8mm thick fully perforated calcium silicate boaard made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystallie structure withminiumu comprerssive strength 225 kg/sq,cm,bending strength 100kg/sqcm of size 595x595mm having kperforation of dia 10mm with minimum perforated area 18% with non woven tssue on the back side,having an NRC(Noise Reduction coeficient)of 0.85,with 50mm thick rockwool of 48kgk/cum backing

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fitting including all complete job as per direction of E/I.

Providing and fixing floor mounted,white vitreous china single piece,double traps syphonic water closet of approved brand/make ,shape ,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system,including all fittings and fixtures with seat cover,cistern fittings nuts,bolts and gasket etc including making connection with the existing P/S trap,complete in all respect as per direction of E/I.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

580 mm long with 10 liter lowo level PVC cistern.

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l.

(A) Flat back or standing corner ( 600 mm x 350 mm )

Supplying, fitting and fixing viterous white glazed earthen ware indian squating type 600 x 350 mm urinal plate of Parry Hindustan or any other I.S.S. approved make with internal flushing rim 100 mm white glazed earthen ware channel about 1m long 5litre capacity C.I. automatic flushing cistern of reliance or any other approved make with fittings C.I. or R.S. brackets 15 mm & 45 cm long P.V.C. alkathene pipe standard G.I. flush pipe for back and front with spreader fitting and brass coupling etc. 15mm C.I. body brass spindle stop cock weight not less than 450 grms. all complete including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l.

(A) 600 mm x 350 mm size ( large )

Providing and fixing stainless steel A ISI 304(18/8) kitchn sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets ,cutting and making good the walls wherever required(510x1040x250mm)

S/F/F VIP Bath room fitting including all complete job as per direction of E/I.

Bib cock

Concealed Stop cock reduce(ISI)

Wall mixer 3 in 1 systern with provision for over head shower with elbow couupling and wall flange

Sink cocK

Telephone shower with flexible pipe

Towel Rail 24"

Towel Ring

soap dish

Glass shelf 22"

Supplying Fitting and Fixing the Following Items complete with all materials as per specification and direction of E/I Mirror of 6mm thick plate glass bevelled edge mirror Including (i)600mmx450mm Size

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.5mm thickess after scrapping and propperly cleaning the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicone additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

group C

Wiring for circuit/submain wiring along with earth wiring with the following sizes FR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x2.5sqmm+1x2.5sqmm earth wire

2x4sqmm+1x4sqmm earth wire

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

5/6 Amps 3pin 5/6 Amp socket

5/6 amps,3 socket outlet

15/16amps,6pin socket outlet

S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required.

S/F Modular boxes,base &cover plate: Supplying and fixing following size/Modules G.I.Box along with modular base & cover plate for modular switches in recess etc as required.

6 module (78mmx205mmx50mm)

Supplying and fixing the following way,horizontal type three pole and netural, steel M.C.B.ditrubutionbaord,415volts, on surface/recess, complete with tinned copper busbar, neutral bus bar, earth bar,din bar, interconnection powder painted including earthing etc as required ( butwithout MCB/RCCB/Insolator)

4way(4+12) Double door,Horizontal type

8way(4+24) Double door,Horizontal type

S/F of 6Amp to 32amp amprating 240 volt 10KA including all complete job as per direction of E/I.

6/32Amp single polle

50/63 amps TPN

Earthing with copper earth plate 600mmx600mm x3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc as reqd(But without charcoal or coke and salt)

Supply of A.C.1.5 Tr.5 star split A.C.(inverter type) IS 1391-part-II (Makke Hitachi,Daikin,carrier)including all complete job.

Supply of out door stand for 2 qtr splite AC including all complete job.

Supply of 5 Kva wall mountaed automatic volaage sabilzer from range 140v to 280v including all complete job.

Supply of copper Tube of size 1/4" for aplit ac unit 1/1.5/2/3 Tr capacity including all complete job.

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230 V 50Hz,single phase supply etc.complete as required.

20/32 W LED Tube light

Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required.

1200mm(48") ceiling Fan

Supply of metal Exaust Fan 12"(300mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

Supply of PVC/XLPE insulated PVC sheathed heavy duty armoured electric cable with aluminium conductor for 3.5 core,70 sqmm

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

2'x2' LED panel light

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES (BID ID -665091)