Renovation and Construction works including the Admin. Building Smart Class room , Library Building, Computer Lab, and Physics Lab Building No.7 of Pipili College, Pipili, in the District of Puri under the PM USHA for the year 2025-26.

CIVIL

Dismantling and removing 2.5 cm. thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismentaling and removing old tiles flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead

Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead etc. all complete

Providing Reinforced cement concrete work of M-30 grade with 20mm and down grade black hard granite crusher broken chips including cost of all materials labours ,T&P, carriage, royalti, taxes, etc. with watering and curing , all complete. (Item-4, AR-2006)

Lintel Beam

Second Floor

Chajja

Second Floor

Roof Beam

Second Floor

Columns RCC

Second Floor

Slab RCC

Second Floor

Staircase

Second Floor

Providing HYSD. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. (A.R.-2006, Page No - 52, Item No. - 9)

Second Floor

Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71,Item No-3)

Second Floor

12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref :-A/R - 2006 ,P- 103, Item No - 4

Ground Floor

First Floor

Second Floor

16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref :-A/R - 2006 ,P- 105, Item No - 14

Second Floor

6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref(A/R-2006,P-103,Item no-27)

Ground Floor

First Floor

Second Floor

Providing fixing Vitrified matt tiles (600 X 600)mm in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)

Ground Floor Qty.

First Floor

Second Floor

Providing fixing Vitrified matt tiles (300 X 300)mm in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)

Ground Floor

First Floor

Second Floor

Providing fixing GRANITE tiles in floors or steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles. (As per A.R. 89/16)

Ground Floor

First Floor

Second Floor

Fixing Matt tiles(600 X 600)mm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.

Ground Floor

First Floor

Second Floor

Fixing Polished tiles(300 X 450)mm in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.

Ground Floor

First Floor

Second Floor

Finishing wall surface with Cement based Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. Ref :-A/R - 2006, P-236, Item No - 2

Ground Floor

First Floor

Second Floor

Wall painting two coat with any approved Weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.

Ground Floor

First Floor

Second Floor

Wall painting 2 coats with Plastic Emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete.

Second Floor

Distempering two coats to Inside walls with distemper of approved shade on new work to give an even shade exculding cost of distemper.

Ground Floor

First Floor

Second Floor

Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete.

Second Floor

Priming one coat with Red Oxide primmer including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)

Ground Floor

First Floor

Second Floor

Painting two coats with approved Enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge. (As per A.R. 93/3)

Ground Floor

First Floor

Second Floor

Supplying of TATA PARVESH DOOR, (PLANE STEEL FINISH), Frame Profile (100X58) Single Rebate with 46mm, Shutter thickness, Shutter infill-Honycomb and Frame Infill- Puff.

Second Floor

Supplying of TATA PARVESH WINDOW, (OYESTER WINDOW), Double Rebate Plain Steel Finish with 3 Shutter. 5mm Clear Floated Glass. SS 2X3 hingeswith 2.5 mm thickness, SS Handels, Tower Bolt, Stopper, EPDM Gasket And Corner Bracket.

Second Floor

25mm thick CC 1:2:2 with 6mm size CB chips for Grading concret over roof slab etc. complete.

Second Floor

Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board jointing angle No. 1855 etc. and jointing angle No. 1855 etc.

Ground Floor

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect.

Second Floor

16mm thick cement plaster in cement mortar (1:6) in all floors at all height finishing smooth to rough surface of brick walls after raking out the joints including watering and curing rounding of corners with cost conveyance, royalties and taxes of all materials and cost of all labour scaffolding sundries and T&P etc required for the work etc complete as directed by the Engineer in charge.

Kitchen

Security room

Boundary

Cycle

Wall painting 2 coats with weather coat cement paint of approved shade on outer wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding including all costs of labour etc. complete as per direction of E.I.C.

Kitchen

Security room

Boundary

Cycle

Supplying, fitting and fixing GraniteSlab (0.1 to 0.40 Sqm ) in floors of approved make laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.)

Kitchen

Providing & applying Distempering over a coat of primer 2 coats of (1coat primer+2coats distemper ) with approved quality ,including cleaning and smoothening the sur face thoroughly including cost of all materials ,labour, conveyance , taxes, cess ,royalities ,scaffolding , watering , curing ,sundries,tools and plans etc. complete as per direction of E.I.C.

Kitchen

Security room

Cycle

Supplying fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA /NCL VEKA LTD.) Casement Door- 60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x2.5mm for outer frames , 102 mm x 60mm x 2.25 mm for casement window sash profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system , structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like ciipping locking system made of aluminium 1 NO. per sashes and the system is to be installed at the site using anchor fasteners rubber sealant , easy glazing / deglazing at site etc. including cost and conveyance all materials , accessories , labour charges, materials and product conforming to D 638-14 , EN -477-95 and other applicable codes and standards.

Kitchen

Supplying fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA /NCL VEKA LTD.) Three Track -Three pannel sliding window - 60-Series duly manufactured using UPVC reinforced profiles of 108 mm x 45 mm x2.5mm for outer frames and window sash profile and 39 mm x 58 mm x 2.5 mm mullion profile capable of mounting single glazing system , structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like ciipping locking system made of aluminium 1 NO. per sashes and the system is to be installed at the site using anchor fasteners rubber sealant , easy glazing / deglazing at site etc. including cost and conveyance all materials , accessories , labour charges, materials and product conforming to D 638-14 , EN -477-95 and other applicable codes and standards.

Kitchen

Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge.

Security room

Supplying windows with M.S.Grill made out of MS angle frame , MS flat, sheet of approved section & design electrically welded properly 2with all necessary locking arrangement including cost & conveyance of all materials, labours charges,carriage of materils to the site etc complete.

Kitchen

Security room

Boundary

Painting with two coats of enamel paint of approved quality and shade over surfaces as specified below ( steel surface) to give an even shade with 2 coats of approved quality over one coat of steel primer including costs of all materials, labour , conveyance ,taxes, cess , royalities , scaffolding ,watering ,tools and plan etc complete as per direction of E.I.C.

Kitchen

Security room

Boundary

Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge.es and T&P. etc. required for the work complete.

Kitchen

Security room

Supplying, fitting and fixing vetrifed tile in dados of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:3) (1 cement:3 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge.

Kitchen

Security room

Supplying & fixing of industrial vitrified tiles on 20 mm thick bed of cement mortar 1:4 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc complete.

Kitchen

Security room

Filling F&P with excavated materials including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

Boundary

Security room

Cycle

Filling foundation & plinth with excavated earth materials etc complete.

Cycle

Security room

2.5 cm thick A.S flooring with C C (1:2:4) including punning using 12mm c.bh.g chips & watering with cost of all charges etc complete.

Cycle

Providing weep holes in brick masonary / plain or reinforced concrete abutment with 100mm dia PVC pipe

Drain

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as g (AR, P-158/37)

Approach road

Construction of granular sub-base by providing Gr.-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller.

Approach road

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.PCC Grade M15 Concrete.

Approach road

Providing of 80 mm thick factory made cement concrete interlocking paver block of M-35 grade and approved make,varity colour and size made by block making machine with strong vibratory compection of approved design and shape ,laid in required colour and pattern over 50mm thick compected bed of coarse sand ,filling the joints with fine sand etc,all T&P etc complete as per direction of Engineer- in-charge.

Approach road

ELECTRICAL WORKS

Internal Wiring Items

Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS

Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A

Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B

Single light/fan/ex.f/call bell point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C

Subsequent point of group controlWiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

6A Plug on the same board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved

6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved

2x6A Plug on the separate board For computer/UPS/other power point or TV point & other use for Data center/go down area with complete fitting by 02 nos of 5A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved(For ICTC Lab & Class room)

Supplying and fixing 15/16A modular socket with 15/16A Switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (AKG or any other equivallent reputed make ISI marked as approved) FRLS as required.

2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor. (BDB to LSB/LIGHT CKT/5A PLUG)

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor.

2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB)

2 nos single core 10 sq. mm copper wire for phase and neutral and 01 nos of single core 6 sq. mm copper wire for earth continuity conductor.(FLOOR PANEL TO BDB )

4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point)

4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point)

4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point)

Supply, delivery, installation & testing of AC boards consisting of 1 No 20-A DP Modular switch with indicator and 1 No 16A Moular socket in indivisual Modular G.I Box making good the damages caused complete as required and as per direction of Engineer-in-charge.

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens make

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.MAKE KINJAL/ AKG

Supply and fixing modular type indicator on the existing switch box/cover of Anchor make.

Supplying and installation of AC starter Modular type,L&T make or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including moudlar cover.

Light fitting & Fixture

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Havells make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.

Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)

Supply delivery, installation, testing & commissioning of 400 mm size wall fan similar to Havells Pacer or equivqlent complete etc.as required..with accessories

Supplying and fixing of 40 W LED Street light ,WIPRO WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.

Supplying and fixing of 18-22 Watt LED round Surface Fittings CAT No. LD80-171-XXX-60-SM , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.

Supplying and fixing of 18-22 Watt LED round concealed Fittings CAT No. LD80-171-XXX-60-SM , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.

Supplying and fixing of 20 Watt LED Tube light Fittings CAT No. CAT No. LL20-281-XXX-65AL1** , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.

Supplying & installation, testing and commissioning of prewired, 36Watt LED square concealed fittings of wipro MAKE , CAT No. LD30-- or equivallent

Supplying & installation, testing and commissioning of prewired, 5Watt LED 5m strip led fittings of wipro MAKE , or equivallent

Supplying & installation, testing and commissioning of prewired, 20 Watt LED spot lightd fittings of wipro MAKE , or equivallent

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 2x10 cm .

Branch Distribution Boards

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/L&T/Siemens/HAVELLS make, or any other equivallent A catagories reputed make ISI marked as approved

8 way, Double Door SPN DB (FOR LIGHT/POWER/UPS )

8 way, Double Door TPN DB (FOR LIGHT/POWER )

4 way, Double Door TPN DB (FOR LIGHT/POWER )

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Legrand/L&T/Siemens make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections.

Supplying and fixing 25Amps DP 240 volts, RCCB,30mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.

Supplying and fixing 40Amps DP 240 volts, RCCB,30mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.

Supplying and fixing 40Amps 4P 415 volts, RCCB,100mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.

Supplying and fixing 63Amps 4P 415 volts, RCCB,100mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.

EARTHING

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years

Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 4.5 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required.

Supply, delivery, installation, testing & commissioning of L.T. indoor wall mounted type distribution boards made out of 2mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade, dust, damp & vermin proof, having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally, having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.

Incomer:1 125A(100-125A) 4P MCCB(25 KA) with adjustable thermal setting+NL

1 no. 63A 4P onload change over switch

Bus bar: 4 nos. 150A Busbar duly sleeved & 60A E.C bus for Dg.

Outgoing:

4 No 40A 4P MCB.'C' (10kA)

10 Nos 32A 2P MCB 'C' (10kA)

1 No 40A 2P MCB 'C' (10kA)

Provission for SPD.

Instruments: 2 set.LED type phase indicating lamps with control fuses

1 no.100/5A CT operated Digital MFM with CT

Complete duly factory wired as per SLD and panel should have proper earth by suitable rated copper flat.

Cable and HDPE Pipe

Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge.

3core x 2.5 sq mm copper unarmoured cable.

4core x 16 sq mm copper unarmoured cable.

3.5 core x 70 sq mm Aluminium armoured Cable.

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.

3.5 core x 70 sq mm Aluminium armoured Cable.

Providing and laying of fallowing dia HDPE pipe (medium class) in ground complete with HDPE fitting incl. trenching(75 mm depth)and refilling.

63 mm Dia, PN-6, PE-80, HDPE pipe

Supply of materials, Fixing of G.I perforated cable tray along with hanging arrangements & supports fabrication complete. For following sizes.

100x50x50x1.6mm thick.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

SAFETY EQUIPEMENT

Supply , installation ,testing & commissioning of following safety equipments for school

a) First aid box with standard item.

b) As Foam type fire extinguisher (9 liters)as per IS

c) Floor mounting stand for keeping 4 nos. of bucket 5ft in length and 3ft in height made from 30x 30x4 mm angle iron with welded 4 hooks duly painted

DIGITAL WORK COMPUTER & CCTV

Supply, delivery, installation & testing of 3KVA Three phase UPS with 1 hour battery backup for emergency lighting and computers.

Supplying and laying of CAT6 LAN WIRE protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required(1 run)

Supply & laying of the 4 pair,0.5 sqmm telephone cables in existing surface/ recessed conduit etc. as required.

Supply of Material and installation of RJ 45 UTP information outlet.

Supply of ALL Material and installation of DP box with rack data

Supply of Material and installation of RJ 11 Telephone socket.

Supply of ALL Material and installation of CCTV Serveyline accessories

Supply of ALL Material and installation of bullet type CCTV WITH ACCESSORIES

Supply of ALL Material and installation of DP box with rack telephone

Supply, fitting, fixing, commissioning and testing of 25 W cabinet speakerBuilt-in 100v/70v transformer, 4” +1.5” coaxial speaker unit.Power output RMS 30W @100V. Built-in crossover for hi-fi level use. Metal grille and metal baffle. (Make- Electo Voice/ Bosch/ Bose/ JBL)

Wiring with of 2.5 Sq.MM Unarmoured Flexible Speaker Cable as per site with 2mm thick rigid 25 mm PVC pipe, modular boxes, plate, fitting, fixing, connecting and testing of the same etc. as required. (Make-Finolex/ Liberty)

P.H.WORKS

Sanitary Installation

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :

Size 600x450x200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder : C.P. brass

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.

110mm dia u-pvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge

110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

75mm dia U-PVC SWR pipes(Supreme/Ashirvad)

110mm dia U-PVC 'P' trap

100mm dia U-PVC Door Tee

100mm dia U-PVC Plain Bend

100mm U-PVC Door Cross Tee

75mm dia U-PVC Door Bend.

75mm dia U-PVC Plain Bend.

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

100 mm dia

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

100 mm diameter pipe

Supplying all materials, labour, T&P and fixing standard sized (Health Faucet) with double lock 1.0m brass plated flexible hose & wall hook of hidware having cat no - F160002 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)

Water supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

25 mm nominal dia Pipes

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

External work

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

External work

50 mm dia nominal bore

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :

100 mm diameter

Class II

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) :

32 mm nominal bore

Horizontal

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

150 mm diameter

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

15mm dia CP Elbow action Bib cock(Jaquar)FLR-CHR-5047N

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

75mm dia Nahin trap

75mm dia Multi Floor Trap

110x75mm dia Reducer

110mm dia Vent cowl.

W/C connector

PVC Clamp suitable for 75mm to 110mm dia pipe

Drainage

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

250 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

With 20x20 mm square bar

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :

First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.