ELECTRIFICATION OF 60 NOS CAMPUS STREET LIGHT AT IISER PUNE

Amount

Supplying & erecting LED 40 W street light fitting with specificatios : Temperature 3000 to 4500 K, IP65 Protection, -20 to +40 degree celcius operating temeperature, Pressure die cast aluminium material, CRI>80, Operating voltage 100 to 270 V AC, Lumens > 3000, minimum 1 year warranty, MS powder coated mounting bracket which is suitable for mounting new fitting on existing bracket. Heat resistance, EPR gasket bonded to housing shell render the luminaries dust proof & jet proof to IP 65/IP 66. Make Syska / Jaquar / Philips / Wipro / Bajaj / Crompton. Warranty minimum 12 months from date of commissioning.

Supplying & erecting PVC flexiblae cable, 3 core 2.5 sqmm copper conductor, ISI mark, Polycab/Finolex/Asian/Glowstar/RR make, on wall / trussed/ pole or laid in provided trench, pipe etc in approved manner.The rate is inclusive of the cost of material, labour, hoisting, all taxes & levies, octroi etc complete as per direction of Engineer in charge.

Supply and fixing of outdoor type PVC pole mounted box having 4 pole 16 A connector strip for termination of 2 nos 4 sqmm cable, bottom cable entry with gland termination, DIN rail for SP MCB, mounting clamps for pole, earthing termination , MV danger plate on its door, Hinged door with panel lock, dust and water free design, gray or white colour. Transport, handling, labour etc are included, as complete.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of Single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make L&T/ Legrand/Schneider/Siemens

Supply and laying of HDPE PLB 40 mm OD pipe , suitable for LT cable with required duct coupler

Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered flat armoured type ) 4 x 6 sq.mm Aluminum ,XLPE Armourd Cable

Laying of PVC armoured cable, 4 core 6 sqmm Aluminum armoured cable, with continuous 2 Runs of 12 SWG GI earth wire erected on wall / trussed/ pole or laid in provided trench, pipe etc in approved manner.The rate is inclusive of the , labour, hoisting, all taxes & levies, octroi etc complete as per direction of Engineer in charge.

Supplying and making end termination with brass compression gland and AL lugs for 4 core 6 sqmm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.

Providing and fixing 6 SWG GI wire on surface / in recess for loop earthing along with existing surface / recessed conduit / submian wiring cable as required

Providing and fixing 12 SWG GI wire on surface / in recess for loop earthing along with existing surface / recessed conduit / submain wiring cable as required. Termination of 12 SWG Gi wire with ring type lugs on pole with help of bolts etc is in scope of agency.

Supplying and making end termination by using Ring type aluminium lugs, excluding brass compression gland for 1 core 630 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as per direction of Engineer in charge.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Making the trench in soft / hard soil of suitable width & 0.75 to 1 meter depth for laying LT cable, with a layer of 6 cm thick layer of coarse sand at bottom & the cable covered & refilling the trench with soil & making a crown of 12 cm . height on the top of the trench.The rate is inclusive of the cost of material, labour, all taxes & levies, octroi etc complete as per direction of Engineer in charge. Finished trench shall be measured in metre.

Removing of exisiting solar light fitting ( 36 to 72 W ) with wiring , controller and connector etc , from existing pole of upto 9 meter height ( excluding solar PV panel ). Removing, shifting, handling, storage in campus store, inventory, labour, transport, tools, ladders is in scope of agency

Removing of armoured cable upto 35 sqmm from ground excluding excavation work. Removing, shifting, handling, storage in campus store, inventory, labour, transport, tools, ladders is in scope of agency

KUMAR ELECTRICAL AND ENGINEERS

Radha Electricals

Suvarna Electricals Pvt Ltd