REPAIR AND CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANKS SOAKAGE WELLS WATER TANK CLEANING CLEANING OF DRAIN PIPES REPAIR TO DRAIN ETC AND CERTAIN MISC WORK IN ZONE A AND ZONE B AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Cleaning/clearing blocked sewage lines 100mm to 300 mm dia (PVC/ SGSW/RCC hume pipe )at any depth by rodding between manhole to manhole manually and including clearing spot blockages of WC, Floor traps, Nahani trap, Gully trap and drainage pipes etc complete all as specified and directed. ( NOTE: All items including (with men and material) should be nesseary for this work will be arranged by the contractor).

Digging out sludge etc from oxidation pound, septic tank, sump well, man holes including depositing in pits where directed to a distance exc 50m but n exc 250m complete all as specified and directed Note- The unit rate quoted under this item shall deemed to include all the arrangement of necessary T&P with man and material for lifting up sludge from oxidation pound, septic tank, sump well, man holes,excavation of pit ,deposing sludge and cover with earth complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.

Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.5 Sqm (without taking off shutters from the frames) complete all as specified and directed.

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium anodised windows,ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded complete all as specified and as directed.(Note; Glass shall be measured and paid seperately)

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.(Note; Glass shall be measured and paid seperately)

S&F steel ventilator with top hung shutter including including hinges steel peg stay complete all as specified and directed.(Note; Glass shall be measured and paid seperately)

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide zinc chrome primer including surface preparation complete all as specified and directed

Demolition of brick work built in cement mortar incl all quoins arches pillars etc but exceeding ashlar facing dressed stone work and pre cast concrete articles complete all as specified and directed

M&L brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in cement and sand mortar 1:4 complete all as specified and directed

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling complete all as specified and directed

M&L three coat of white wash on wall including preparation of new plastered surface and complete all as specified and directed

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M&L three coat of white wash on ceilling including preparation of new plastered surface complete all as specified and directed

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Demolition of Unreinforced cement concrete in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded crushed stone aggregate) as in plinth protection/foot path finishing the cement concrete surface even and smooth with out using extra cement complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M&L for Sand filling under floors/ paver block or in foundation including watering and consolidation complete all as specified and directed

M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness ,M -35 grade with grey cement and pigment complete all as specified and directed

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed

Demolition of reinforced cement concrete in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate)as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 159, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directed complete all as specified and directed

M&L precast cement concrete 1:2:4 type-B1 as in landings, cover slabs (for manholes etc) Chulla hoods, chajjas, water through managers shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L mild steel bars (TMT) 10mm dia, and over cut to length bent to shape required including cranking, bending spirally for hoping ends for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Excavating in trenches , not exceeding 1.5 mtr wide but not exceeding 1.5 m in depth for foundation etc or for shafts, well cess pits manholes, pier holes etc and getting out in soft/loose soil complete all as specified and directed.

Add to item No.37 for each additional 1.5 m or part thereof in depth beyond the first 1.5 Mtr complete all as specified and directed.

Demolition and breaking up drain pipes 200mm internal dia of pipe (Salt glazed stone ware) , AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes 150mm internal dia of pipe (Salt glazed ware , AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L 200mm bore salt glazed stone ware drain pipe laid in trenches and jointed complete all as specified and directed.

M&L 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L plain cement concrete (1:4:8) type D2 as in bed to 200mm drain pipes including packing under and hunching against the sides of the pipes after they are laid and tested in complete all as specified and directed.

M&L plain cement concrete (1:4:8) type D2 as in bed to 150mm bore drain pipes including packing under hunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Retuning, filling in including spreading, levelling watering and well ramming in layer not exceeding 25cm thick in soft/loose soil complete all as specified and directed.

Removing excavated materials soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking down PVC (SWR) pipes 75 mm/110 mm dia any pattern laid in trench or fixed to wall including all fittings heads shoes, bends necks, etc including removal from site (measured overall fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (including fixing with necessary Clamps) complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (including fixing with necessary Clamps).

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) floor trap of 75mm bore external dia plain with grating including jointing with solvent cement .

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double (double T) equal or unequal) complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repair plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355x 265mm white (Minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and fixing plugs, bedding urinal against wall in cement mortar 1:2, complete all as specified and directed.

S&F Vitreous China Urinal, Half Stall type White (excluding flushing cistern, flush pipe and waste pipe) and fixing complete all as specified and direcetd.

S&F (in repairs) stop cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and

S&F stainless steel kitchen plate rack 900X900mm (Make Blue star) complete all as specified and direcetd.

S&F in repairs vitreous China wash basin, white, flat back size 550X400mm excluding taps, waste pipe, china and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply only 32mm dia waste coupling of PTMT (half or full thread) min wt 40gms complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down, high pressure, with or without lettered “Hot” or "cold” with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia fixed in repairs complete all as specified and directed.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight15mm-90gms).complete all as specified and directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F in repair Brass cromium plated shower rose 125mm Size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and direcetd.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges complete all as specified and directed.

S&F towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and directed.

Dismantling of water tanks of exc 250 ltrs n.exc 500 ltrs capacity and removing to store complete all as specified and as directed

S&F rotational moulded polyethylene water storage tank 500 ltrs Capacity consisting of three laver cylindrical vertical with top closed hoisted and fixed in position including 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed all as specified and directed.

Dismantling of water tanks of exc 500 ltrs n.exc 1000 ltrs capacity and removing to store complete all as specified and as directed

S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position INCLUDING 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12 mm thick accoustic perforated tiles fixed or laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 6 mm dia GI (upto 1200 mm in length) adjusting levels fixed to roof slabs by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete all as specified and directed

Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for, incl removing of debries all as specified and directed .

M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M&L for preparation of sunken floor surfaces and provide 10mm thick rendering in cement mortar 1:4 mixed with and including WPC @2% by weight of cement and than applying a coat of bitumenous primer @.30 Kg/sqm and applying a coat of hot industrial bitumen 85/25 grade @ 1.20Kg/Sqm over primer and laying modified polymeric water proofing membrane (weight not less than 3kg/sqm 2mm thick consisting 100micron HMHDE film) on floor and walls with 100mm overlaps where required and applying one coat of hot industrial bitumen grade 85/25 @ 1.20 Kg/Sqm on top of membrane as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge .

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B0 (using 12.5mm graded crushed stone aggregate) as in base of floors complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface of size 300 mm x 200 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm(400x400x7mm)in floor ,over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurrycomplete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm(400x400x7mm)as in skirting , laid over and including 10mm thick rendering in CM 1:4 on wall set and jointed in neat cement slurry complete all as specified and directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premises, complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L machine cut mirror polish kota stone slab flooring 20-25mm thich over and including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers laid over and including 10mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15 mm bore complete all as specified and directed.

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20 mm bore complete all as specified and directed.

S&F 15 mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

S&F 20 mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Cutting chases in brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing etc, and making good, cutting not exc 10 cm girth complete all specified and directed.

M&L for Plain cement concrete Type B2 1:2:4 (40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

S&F in repair for CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified and directed.

Taking down Brass CP mixer of any size and any pattern carefully from existing GI tubing and Refixing of mixer in the same point after minor repairs including changing of wall mixer legs any type and any pattern including repair of tiles complete all as specified and as directed by Engr -in-Charge

S& F in repairs Brass CP mixer 15mm telephonic with crutch (provn for hand shower) for mixing hot & cold water, screwed down, three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed.

S& F in repairs Brass CP mixer 15mm Dia for mixing hot & cold water, screwed down, three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed.

S&F (in repairs) two way angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair for Stainless Steel Jet sprayet with 1 Meter Flexible tube complete all as specified and directed.

S&F swivel shower rose in repair of PTMT any colour for fixing with 15mm pipe fixed all as specified (minimum wt. 40 gms) complete all as specified and directed.

S&F in repair 32 mm bore of pipe low density polythene pipe (LDPE) of pressure rating 6Kgf/sqcm fixed to wall or laid in floor etc including fittings complete all as specified and as directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.complete all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top and bottom rails . MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , and bottom rail ,Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement, complete all as specified and directed.

S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and directed.

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F in repair glass shelf 500x125 mm long fency type fixed to wall with rawl plug and chromium plated screws complete all as specified and as directed.

S&F in repair Toilet paper holder of brass chromium plated fixed to wall with chromium pleted brass screws complete all as specified and as directed.

S&F in repair Soap dish steel chromium plated type fixed to plug with chromium pleted brass screws complete all as specified and as directed.

S&F in repair fancy type curtain rod MS conduit PVC coated including fency type knob curtain rod end with fancy type MS bracket for hanging curtain rod completed all as specified and as directed

M&L for Cleaning and removing alll scale and dirt ,etc,from tanks(500ltr)and from mouths of circulating pipes ,etc and complete all as specified and directed

M&L for Cleaning and removing alll scale and dirt ,etc,from tanks(1000 tr)and from mouths of circulating pipes ,etc and complete all as specified and directed

S&F in repair MS galvanised chain link fencing 4 mm diameter of wire and mesh size of 100mmx100mm including line wires and provision of binding wire.complete all as specified and directed

S&F in repair Galvanized two strands steel barbed wire 2.24 mm dia barbed with 2.00 mm dia barbs at 75 mm spacing and straining and fixing to any type of strandard rails straining bolts including securing or laying at crossing with and provn of galvanized mild steel wire staples are steel pins as directed.

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed

UTTRAKHAND BUILDERS

M/S WASEEM KHAN CONTRACTOR

M/S CHAUHAN ELECTRIC WORKS

m/s udit constructions

S.M. KAZIM