Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC | ₹2.1 L | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹2.1 L+₹4,789.75 (2.30%)Rejected-Finance | ₹2.1 L+₹4,789.75 (2.30%) | L2 | Rejected-Finance BEING L2 |
| 3 | L3₹2.1 L+₹5,393.67 (2.59%)Rejected-Finance | ₹2.1 L+₹5,393.67 (2.59%) | L3 | Rejected-Finance BEING L3 |
Tender Value
₹2.1 L
EMD Value
₹4,165
Closing Date
11 Feb 2026, 5:00 pmClosed
Executive Engineer
Office of the Executive Engineer Metropolitan Drainage Mechanical Division Jalasampad Bhawan (4th floor) Salt Lake City, Kolkata-700091
Premonsoon maintenance and repair of Supply fitting and fixing of submersible pumpswith accessories of GI pipe PVC pipe and Peets valve etc at Additional Chowbaga Pumping station under MDMD at Paschim Chowbhaga PS Anandapur District South 2
2026_IWD_993254_16
WBIW/EE/MDMD/e-NIT-20/2025-26
Open Tender
MECHANICAL
Percentage
Chowbhaga
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,165
10 Sept 2026
23 Jan 2026
12 Feb 2026
23 Jan 2026
11 Feb 2026
23 Jan 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour for checking, testing of DOL starter, cable and lifting the submersible pump motor 7.5HP(5.5KW) / 2HP(1.5KW) with column pipes after disconnecting the the plumbing and electrical connection with contractors own tools tackles and scafolding/tripoid stand arrangrment, checking and testing submersible pump motor set and carrying it to section office as per direction of EIC. | 2 | p/job | 5,260.61 | ₹10,521.22 |
| 2 | Servicing/overhauling/replacement of motor bearings and application of grease and heat burnishing of motors for smooth and trouble free operation. | 1 | job | 8,878.91 | ₹8,878.91 |
| 3 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. | 2 | p/day | 8,983.79 | ₹17,967.58 |
| 4 | Labour for lowering of submersible Pump Motor set after assembling of pump with motor and connecting with new/existing pipes lines incl. painting with two coats of anticorrosive paints with contractor,s own tools and takels and scafolding/ tripod stand arrangement. After comissioning of pump motor set and reconnection of other plumbing and electrical lines. | 2 | p/job | 5,260.61 | ₹10,521.22 |
| 5 | Supply & fitting fixing of round strand (steel core/fibre core) steel wire rope (ungalvanised, IWRC) of 6x36 construction of 1960 tensile designation as per IS‐2266 (make: Usha Martin, Bharat Wire Ropes ltd or BIS approved makes), rope clamp with Dishakle and fitting fixing of said material with correct alignment and position inclusive of all cost of labour, T&P, scaffolding charges & all other incidental charges as necessary to complete the job in all respect upto the satisfaction of E.I.C.
a) 12 mm dia (steel core) | 80 | RM | 283.65 | ₹22,692 |
| 6 | Supply and delivery of clear water vertical wet type submersible pump suitable for borewell conforming to IS : 8034 ( and as amended thereafter ) with standard MOC for potable clear cold water and BEE 3 Star Rated capable of dischargirg noted M3/hr against head of ater column. The pump shall be directly coupled with continueous rated 2 pole suitable wet type vertical squirel cage induction motor conforming to IS : 9283 (and as amended thereater) operation in AC Three phases 415 V, 50Hz, (Catagories: B motor)
5HP, 11 stage, head in meter: 70 mtr, Discharge: 9.5 m3/Hr,
Make: KSB/Kirloskor | 1 | nos | 57,146.81 | ₹57,146.81 |
| 7Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixingetc. complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) | |||||
| 7.01 | 50mm dia medium quality | 40 | Mtr. | 643.57 | ₹25,742.8 |
| 7.02 | 100 mm dia. medium quality | 10 | Mtr. | 1,198.95 | ₹11,989.5 |
| 8 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
(iv) 50 mm dia | 4 | Each | 2,815.03 | ₹11,260.12 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.72 MB
2911i.pdf
Tender Documents • 0.93 MB
BOQ_2429444.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .