CERTAIN MISC REPAIRS TO COMPOUND WALL, GATE, FENCING, AREA DRAINAGES, CULVERTS AND HARD STANDING AT ICGS RATNAGIRI

Amount

Demolition of brick work or stone /boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Machine cut Laterite stone masonry as block-in-course masonry well bonded exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

Taking down of cement or cement plaster any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 on surfaces other than fair face of stone masonary work finished even and smooth using sagol finish.

M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick or Concrete Surfaces Mixing WPC @ 3% by wt of cement and finished even & smooth without using extra cement, complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

Supply only water proofing compound complete as specified and as directed.

M&L Preparing new plaster surface of wall of any description and apply two coats of cement base paint over a coat of primer all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (above or below GL) complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping including necessary form work etc complete all as specified and directed.

M&L for Cement concrete1:2:4 type B-2 (using 20 mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and as directed.

Demolition of cement concrete reinforced cut as required to facilitate demolation complete all as specified and as directed.

M&L for Precast RCC 1:2:4 type B1 (using 20 mm graded aggregate) as in cover slabs including necessary form work etc complete all as specified and as directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L form work to soffits of suspended slab such as roof slab and similar work n.exc 200 mm thick (horizental or slopping) fair finished flat surface complete all as specified and as directed.

M&L form work to edges of concrete flats, treads,break in floor & roofs n.exc 20 cm wide horizontal or slooping and similar works complete all as specified and as directed.

Excavating in trenches n exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, benching complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (above or below GL) complete all as specified and as directed.

M&L for cement concrete type C-2 (1:3:6) 75 mm thick as in plinth protection surface fair & even.complete all as specified and directed.

M&L for 75 mm PCC 1:4:8 type D-2 (using 40 mm stone aggregate) as in sub base to floors for laying tiles floors complete all as specified and directed.

M&L for coloured, glossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry and painted in white or coloured cement in floors incl 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.

Excavating in post holes soft/disintegrated rock (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 (using 40mm graded stone aggregate) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete as specified and directed.

S & F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galvanized mild steel wire , staple or steel pins etc; as directed (Each line of wire to be measured )

Demolition of Reinforced brickwork in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition)

M&L Reinforced cement concrete (nominal mix) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresse Type B0 1:2:4 (12.5mm graded aggregate)complete all as directed by Engr in charge.

M&L Reinforced cement concrete (nominal mix) Columns, pillars, piers, posts and struts Type B0 1:2:4 (12.5 mm graded aggregate)complete all as directed by Engr in charge.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, eaves board etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging door or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete . Fe410-W(Gde-E-250) quality-A.

S&F 1.25mm thickness Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L for Granite of 20mm thick (any type )of work (table rubbed and polished) in steps , jambs , pillars , window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1 :2) using marble dust with admixture of pigment to match with shade of granite.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxid/zinc chrome.

M/S DUBAL CONSTRUCTION (BID ID -3118598)

LAXMI ENTERPRISES (BID ID -3117872)

STAR FABRICATION (BID ID -3118716)

Advait Enterprises (BID ID -3118381)

SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3122271)

m/s Pravin s Bhosale (BID ID -3121743)

M/S jvsr constructions (BID ID -3118435)

M/S. G G NAIDU (BID ID -3121846)