01/EE(C)/PRJ/CD/BGL/2024-25

Amount

Supplying , transporting, loading, unloading and installing of Corner table of Godrej Make and model Bloom with following specification. a) Overall Size : Width : 600 mm Depth : 600 mm Height : 450mm Made b) approved tempered glass of 8mm thick, c) Solid rubber woood legs and frame, d) MS sheet as bottom shelf . DECORATION MATERIALS WITH FOLLOWING SPECIFICATIONS: (DENSITY / TYPE) a) PU coating to the rubber wood parts, b) Clear glass Rubber wood understructure with 12 mm tempered glass of approved brand as top. c) MS sheet at the base, with a laser-cut floral design, can be used as a display shelf. d) Tapered legs with enhanced aesthetics and as directed by the Engineer-in-Charge.

Supplying, transporting, loading, unloading and installation of Bed of HNI make and model Siesta Bed of size 2000x 900 mm with a) Top & Side Panels of the bed made of 18 mm thick Pre-laminated Particle Board of approved brand and manufacture (OSL/BSL as per requirement). b) The frame made out of M. S. tube of approved brand and manufacture of size 25mm x 25mmx 1.2mm Thick. c) The four legs made out of M.S. tube of approved brand and manufacture of size 50mm x 25mm x 1.2mm thick. d) The leg shall be covered in front by Head & Footrest Panel made of 18mm thick Pre-laminated particle board of approved brand and manufacture (OSL/BSL as per requirement). e) Prelaminated Particle Board shall be Grade II Type II conforming to IS:12823 :1990. f) Decorative Matching PVC Lipping of approved brand and manufacture of 1.2mm thickness shall be provided on all the edges of bed. g) All Metal Parts/M.S. tube shall be Powder Coated with minimum 45 microns thickness. h) Head Rest Height shall be 900mm & Foot Rest Height shall be 450mm and as directed by Engineer-in-Charge.

Supplying transporting, loading, unloading and installing storage with 1 door and PLU locker of Godrej make and model Door PLU of size :- 450mm(W) x 470mm(D) x 1950 mm(H) with following specification. a) Height should be including leveller, height of leveler is 50 mm and adjustement possible should be 15mm, construction & material shall be aesthetically appealing completely known down construction. b) The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) c) Legs fitted with screw type leveler made from CRCA of approved brand and manufacture combination of Top panel(0.5mm CRCA), d) side panel(0.5mm CRCA),e) Bottom panel(0.5mm CRCA), f) Back panel(0.5mm CRCA), g) Top Bottom stiffner(1.2mm CRCA) and h) End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513.i) The doors (without envelope slot) made from 0.6mm thick CRCA (D Grade, IS-513). j) Hinge shall be soft closing, door should have envelope slot with cover made of plastic label paper, for 4 door locker hinge of size 373mm (W) x 18 mm thick x 473 mm(H). k) Shelving should be 10 bend panel made of 0.5mm thick CRCA (D Grade, IS-513). l) The locker should withstand uniformly distributed load capacity of each shelf is 20 kg. m) 3 shelves for 4 door locker without envelope slot. n) Lock option shall be cam lock - overall knob that functions as a handle, click action mechanism, key removal in locked and unlocked position. o) The lock shall be made of zinc alloy die cast housing and finish shall be Epoxy Polyester Powder coated to the thickness of 50 microns (+/- 10 micron) and as directed by the Engineer-in-Charge.

Supplying transporting, loading, unloading and installating High back chair ( high neck rest) of HNI/Godrej/Merryfair make and model No- P069YFB6SV Fulkrum ( Synchro - Tilt Ergonomic with 3 way adjustable Armrest with following specification. a) Adjustable headrest 40 degree tilt and Seat Fabric, Mesh Back,PP Backbone. b) Seat Slide Seat, Lumbar support with depth adjustment. c) The chair should have Weight Capacity 120kg, d) Multi Positions Locking synchronize Mechanism, e) 3 way Adjustable, f) BIFMA Level 3 gas lift for Seat height adjustment, g) Glass-fibre filled Nylon base. h) All the components shall be 100% recyclable. i) The chair shall be greenguard & BIFMA Certified and 10years on site warranty and as directed by Engineer-in-Charge.

Supplying transporting, loading, unloading and installing low back chair (vistor chair) of HNI/Godrej/Merryfair make - model - P067YFB6SV - Fulkrum ( Synchro - Tilt Ergonomic with 3 -way adjustable Armrest with following specification. a) Adjustable headrest 40 degree tilt, Seat Fabric, Mesh Back,PP Backbone, b) Seat Slide Seat available. c) Lumbar support with depth adjustment, d) The chair should have Weight Capacity 120kg, e) Multi Positions Locking synchronize Mechanism, f) 3 way Adjustable BIFMA Level 3 gas lift for Seat height adjustment, g) Glass-fibre filled Nylon base. f) All the components shall be 100% recyclable. i)Greenguard & BIFMA Certified and 10years on site warranty and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installation of Main desk of HNI make Model - Regus of size 1500 mm x 750 mm x 750 mm with a) Side unit of size 1200 mm x 500 mm x 750mm b) Table with 25mm thick postlam partical board top of approved brand and manufacture, c) supported by 25mm thick Prelaminated Partical Board of approved brand and manufacture d) gable ends with CRCA steel of approved brand and manufacture e)Powder coated 1-1.2mm thickness round understructure. f)Gable ends shall be fitted to the Worktop with KD-Fittings and shall be provided with 2 Nos. of glide screws for levelling of the workstation. g) All straight edges shall be provided with hot pressed 1mm thick PVC edging of approved brand and manufacture using special hot melt glue at high temperature. h) One No. of 18mm thick Prelaminated Partical Board Modesty panel of approved brand and manufacture with clearence of 100-150mm from Finished Floor Level is included in the workstation. i) Side unit comprises of Access Flap with Metal Vertical Cable riser for wire management and as directed by Engineer-in-Charge..

Supplying, transporting, loading, unloading and installing 4 drawer filing cabinet storage unit Vertical Filing Cabinets of Godrej Make - Model - 4 drawer filing cabinets, which uses less floor space. a) Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA of approved manufacture . b) It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. c) The Top, Side & Drawer Front thickness should be 0.7mm. d) The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. e)The Back, Bottom and Drawer thickness should be 0.5mm. f) Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. g) There shall be a Snap on type plastic label holder on Drawer Fronts. h) In addition, 28 ‘Ezee’ / ‘Visa’ files (Fullscape) from front to back of thickness 20mm per drawer can be hanged in VFC. i) The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. j) The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. k)The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). l) Plain Triangular plate pop should be riveted at the bottom corners for rigidity. m) Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. n) The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) and as directed by the Engineer-in-Charge.