New rooms and other construction work in the district panchayat office premises.

Clearing and grubbing land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side

Cement Concrete 1:6:12 in cement, corse sand and 40mm stone ballast including suply of material and labor etc in FoundationSI No273a

E/work in filling plinth including of all cost with 3km cartage of erth work.etc. Complete SI no 251+253d

R.C.C work in 1:1.5:3 in cement c/sand and 20mm gauge stone grit of approved quality including material labor T&P etc complete. plinth beam lintal beam & sun shedes up to plinth excluding cost of steel etc. Si no. 5.2.2(i)

M -150 Class B W in 1:6 cement, corse sand mortar in super structure above plinth i/c of all cost S I No. 6.1.2+6.8A

Plaster 12mm thick in 1:4 in cement fine sand mortar including supply of material labour etc

M.S. angle Iron in Door frame of 40x40x6mm angle iron and flat 40x5mm thich including all necessary fitting complete

Providing and fixing glass panes with putty and glazing clips in steel doors, windows all complete of the work. With 4mm thick glass panes as per

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 plyv eneering with vertical grain sor cross band sand face veneer son both face sof shutters. including ISI marked Stainless Steel butthinges withn ecessary screws, Steel Handels, Siliding bolt, Door Stopper and tower bolt

Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. Same As Item No- 15+14

One Coat Priming &One Coat Distempering with dry distemper of approved brand and required shade on undecorated walls urface to give and even surface including supply of all materials, labour and T&P etc. complete

Wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of dirt, grease loose pieces and prepare smooth.( for two coat )

Cement concrete Flooring in 1:2:4 cement, Corse sand and 20mm stone grit i/c of all cost 25 mm thick Ground Floor

P.V.C. 110mm dia Rain water pipe i/c with bend clamp etc all comp.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Stair railing

Kota stone slab flooring over 20mm (average) thick base laidover and jointed with grey cement slurry mixed with pigment to match the shade of theslab, including rubbing and polishing complete with base of cement mortar 1:4 (1cement : 4 coarsesand) : 25mm thick Ground Floor

Providing and laying Vitrified tiles in floor with lean concrete of 500x500mm sizes (thickness10mm), with a water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in desired colours ands hades, laid with cement based high polymer modified quickset tile adhesive (water based)conforming to IS:15477, including grouting of joints. including preparation of 75mm thickbase with concrete 1:4:8 Cement, Coarsesand and 40mm B/B complete as per Engineer -In -Charge.

Providing and fixing18mm thick Granite (gangsaw cut) mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windowsills, facia sand similar locations,of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement:4coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels. (Slab area above 0.50 Sq.M.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Ground Floor

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry

Curtain For Door and windos

S/F SIGN BOARD

Electrification Work

Fire Extinguiser