PROVSN OF PVC COATED GI CHAINLINK FENCING KV GROUND AT DRDO T.SHIP,FIRE ESCAPE STAIRCASE FOR DMDEOFFICE BLDNG UNDER AGE B/RSEC-BAD AND SPLIT TYPE A/C TOBE CATERED FORTHE PROJ DLPMNT OF SINGLECRYSTAL BLADE IN METAL JOINNG GROUP,BLDG No61B OF DMRL HYD

Amount

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in hard/dense soil complete all as specified

M & L for PCC 1:3:6 Type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Excavating in trenches n.exc 1.5m wide and exc 1.50m deep and getting out in hard/dense soil for foundations, manholes etc complete all as directed.

M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation complete all as directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified as directed.

M & L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching etc including necessary form work complete all as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

S&F PVC coated GI chain link fencing of wire of 3.5mm thick , 3mm wire dia and 0.5mm thick hot dip PVC coating with aperture of chainlink is 50mm x 50mm complete all as specified and directed. Make: TATA WIRON PVC D-FENCE , or Techno commercially Equivalent approved by GE

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) and similar work conforming to Fe 290 Gde E-165 complete all as directed.

M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) of 75mm thick as in Path / PCC floor, finished even and fair complete all as directed.

Material and labour for coloured chequered cement concrete tiles 25mm thick,of any shape and size not less than .09 sqm in each tiles, set and jointed , pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed in cement mortar (1:6)complete all as directed.

M&L for Walling of regular coursed secunderabad stone masonry , well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc. 25 cm as in soil complete all as specified and as directed.

Removal of excavated material not exceeding 50m and deposited where directed at level not exceeding 1.50 Mtr above the starting point, soil complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as directed.

S&F framed work such as angle iron, grills, gratings, Gates etc., with ends of bars shouldered and/ or riveted, or forged into spike, framed guard bars., barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe 290 Gde E-165 complete all as directed.

S&F RCC Garden Chair Bench (Heavy) WB (Machine Made with Glassy Finishing) of size 1500(L), 500(W), 480(H) in mm approved colour complete all as directed.

S&F Mild steel screw bolts,nuts and washers of 5 to 10mm neck dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends not exceeding 5cm long, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm in width or grith, not otherwise described including preparation of surfaces complete all as specified and as directed.

M & L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and as directed.

M & L for Edge stones to flooring with stone setts of size 250 to 300mm long x 150 to 200mm wide, and 450mm deep and ditto complete all as specified and as directed

M & L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and as directed

M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft loose soil and depositing excavated material outside MOD land all as specified and directed

Material and labour for PCC 1:2:4 Type B1 using (using 20mm graded stone aggregate) in foundations, filling and holes etc complete all as specified and as directed.

S&F MS work as in stairs (framed) including stringers, treades, landing, balusters, hand rails, posts etc. including cleats, brackets, MS plates etc. complete conforming to Fe-290 Gde E-165 including welding etc all as specified and directed.

S&F rolled mild steel Joist, channel, angle, or tee sections, fixed independently without connecting plates etc conforming to Fe-410 W (Gde-E-250) quality A complete including welding all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes etc conforming to IS 1661-1998 grade St-240 all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm but n exc 22.5 cm long, dia of neck 16 to 20 mm complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M & L providing 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L PU coated machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M&L for granite (of any type ) 20mm thick in walls cladding or in floors, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 20 mm thick screed bed in Cement mortar 1:6 all as specified and directed.

S&F powder coated glazed aluminium door using 101.6mm x44.45mm x 2.00mm chowkhats and 85mmx44.45mm x 2 mm section vertical style and 101.6mm x44.45mm x2mm rails mounted on floor spring fixed with snap beading rubber of suitable size and one mortice lock, two alum door handle D type 200 mm long, two alum tower bolt of 200 mm length for each leaf,complete all as directed.

S& F powder coated aluminium sliding window made out of hollow extruded aluminum section as mentioned below and glazed with 4 mm thick glass fixed with rubber beading/gasket and aluminiun anodised beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) Chowkat - size 50.30 x 26 x1.60 mm thick (b) Shutter top and bottom rail - size 37.50 x 15 x 1.00 mm thick (c) Shutter inner rail - size 37.50 x 15 x 1.00 mm thick (d) Shutter side (Handle) style - size 37.50 x 15 x 1.00 mm thick

S&F Powder coated aluminum grill made of 6 mm dia aluminium bars, size of mesh 50mm by 50mm fixed together with aluminium angle 40x40x2 mm thick all round the grill complete fixed in position complete all as specified and as directed.

Supply and install, test and commissioning of hi wall split units indoor/outdoor complete with cordless remote control unit with ISEER 5 star rating, of capacity 2 TR with CFC free Regrigerant gas like R-32/ 410a suitable to operate on 230V single phase supply, Refrigerator copper tube of suitable dia from indoor to outdoor unit, insulation felt to copper tubing, power cable/control wiring from indoor unit, provision of rigid UPVC condesate drain piping from indoor unit to ground level etc, all as directed. Make: VOLTAS/HITACHI/BLUESTAR

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ±2.5% and of capacity 5 KVA complete all as specified and as directed. Make: V-GUARD/PHILIPS/MICROTEK

S & F sheet metal DB with metal clad earth plug and socket controlled by MCB 5 to 32 Amps capacity operating on 230 Volts AC, 50 Hz electric supply complete all as specified and directed. Make: STANDARD/ HEVELLS/PHILIPS

M&L for submain wiring comprising single core, 2 runs of 4 Sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100volts grade drawing in and including appropriate dia PVC conduits with cutting on wall for surface/ concealing the conduit inside the wall with necessary civil works for making good the disturbed surface with PVC conduits and conduit fittings complete including 1x4sqmm nominal cross sectional area multistranded copper conductor cable. PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.

EXELLENT POWER CORPORATION

Anjana corporation