Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC 36 137 THANGAMAPURIPATTINAM METTUR DAM 636 402 | SALEM | TAMIL NADU | 636402 | ₹2.1 L Quoted ₹2.2 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | SRI V M A ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00 | Charges for disconnection of power cable de- coupling the motor from pump and checking alignment of the motor shaft with pump shaft. | 1 | Nos | 7,251 ₹7,251 |
| 2.00 | Charges for removal of end covers and measuring the air gap and magnetic axis. | 1 | Nos | 2,454 ₹2,454 |
| 3.00 | Charges for removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location. | 1 | Nos | 4,991 ₹4,991 |
| 4.00 | Charges for removal of sleeve bearings, resting the rotor on the stator after placing rubber sheet. | 1 | Nos | 11,441 ₹11,441 |
| 5.00 | Charges for removal of foundation bolts, lifting the motor to a convenient location. | 1 | Nos | 11,441 ₹11,441 |
| 6.00 | OVERHAULING OF MOTOR:-a) OVERHAULING OF STATOR: Charges for Inspection and cleaning and checking of stator windings, fastening of the stator winding to the end ring and also the inter coil spacers and packing in the overhang portion of the windings tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR Value, DC resistance and Tan delta. Packing in the overhang portion of the windings, tightness the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR value, DC resistance and Tan delta. | 1 | Nos | 64,782 ₹64,782 |
| 7.00 | b) OVERHAULING OF ROTOR: Charges for Inspection, cleaning of released rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, cleaning of overheated and burnt places and applying one coat of Dr.Beck’s insulating varnish and drying out. | 1 | Nos | 16,507 ₹16,507 |
| 8.00 | c) Charges for cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc. | 1 | Nos | 35,350 ₹35,350 |
| 9.00 | d) Charges for checking the bearing and preparation of bearing surface and blue matching the housing. (Bearing supplied by TNPGCL) | 1 | Nos | 13,810 ₹13,810 |
| 10.00 | Charges for lifting and erection of the motor back on its bed after cleaning and checking healthiness of pedestal insulation. | 1 | Nos | 11,441 ₹11,441 |
Tender Value
Refer Docs
EMD Value
₹2,100
Closing Date
4 Aug 2025, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPS-I ES Circle EMI Unit-IV Complete overhaul of 1 No 3500 KW 6.6KV HT motor BFP -4C Sl.No 40921-T-421-01-01 during AOH 2025 26
2025_EB_583483_1
CE-MTPSI-SE-ES-EM-I-OT48-25-26
Open Tender
Electrical Works
15 days
MTPS-I/METTURDAM
AS PER TENDER SPECIFICATION
4 documents required · 4 mandatory
₹0
₹2,100
Yes
14 May 2026
18 Jul 2025
5 Aug 2025
18 Jul 2025
4 Aug 2025
18 Jul 2025
Amount
Charges for disconnection of power cable de- coupling the motor from pump and checking alignment of the motor shaft with pump shaft.
Charges for removal of end covers and measuring the air gap and magnetic axis.
Charges for removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location.
Charges for removal of sleeve bearings, resting the rotor on the stator after placing rubber sheet.
Charges for removal of foundation bolts, lifting the motor to a convenient location.
OVERHAULING OF MOTOR:-a) OVERHAULING OF STATOR: Charges for Inspection and cleaning and checking of stator windings, fastening of the stator winding to the end ring and also the inter coil spacers and packing in the overhang portion of the windings tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR Value, DC resistance and Tan delta. Packing in the overhang portion of the windings, tightness the wedges, spraying one coat of Dr.Beck protective enamel varnish, drying out the stator, preheating, checking the IR value, DC resistance and Tan delta.
b) OVERHAULING OF ROTOR: Charges for Inspection, cleaning of released rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, cleaning of overheated and burnt places and applying one coat of Dr.Beck’s insulating varnish and drying out.
c) Charges for cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc.
d) Charges for checking the bearing and preparation of bearing surface and blue matching the housing. (Bearing supplied by TNPGCL)
Charges for lifting and erection of the motor back on its bed after cleaning and checking healthiness of pedestal insulation.
Charges for assembling of sleeve bearings, checking the interference between the bearings and housing, checking the clearance between shaft and bearing.
Charges for assembling the end covers, checking air gap and magnetic axis.
Charges for lifting the cooler assembly, fixing with motor and connecting the water pipes etc.
Charges for termination of power cable, coupling the pump with motor and checking alignment of the motor shaft with pump shaft.
Charges for tightening of bed bolts, foundation bolts, checking the IR value, DC resistance and trial run the motor in decouple/ couple condition running the motor satisfactorily.
Charges for painting the motor complete surface and fan blade with 2 coats of standard Grey enamel paint. Area of 1 No. BFP HT Motor-46 M2
Material charges : Smoke Grey enamel paint
Dr.Beck varnish
Thinner
Cost of consumables
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
BOQ_697156.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid