REPAIR TO TILING, GI/CI FITTINGS, REPLACEMENT OF BATHROOM FITTINGS, REPAIR/REPLACEMENT OF WOODEN DOORS, GLASS DOORS AND PERIODICAL SERVICES AT MANEKSHAW CENTRE AND KHYBER LINE UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pillar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water Supply Repair/ replacement to leaking flushing cistern low/ high level/concelled flush cistern any type and make, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water Supply available upto water taps incl attending the complaints of no water Supply.repair to PVC bend, pipe etc., complete all as specified and as directed.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at MES Complaint Cell. 3. A recovery of Rs. 50/- per complaint shall be recovered from the contractor for non-attending the complaint on same day. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill 7. The rate quoted by the tenderer are also included for taking down of unsv items and fixing of new items for the items catered here in after "Supply only" and these tradesmen shall not be utilized for the items described as S&F /M&L or S&F in repair/M&L for fix in repais. 8. The old unsv items shall be contractors property after deducting the amount from contractors due as per Sch of Credit.

Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, dressing table, pelmets, plate rack incl Aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and as directed.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate carpenter with all necessary T&P on all working days from 08:30 AM to 5:00 PM at MES Complaint Cell. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of plumber on any working days. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill 7. The rate quoted by the tenderer are also included for taking down of unsv items and fixing of new items for the items catered here in after "Supply only" and these tradesmen shall not be utilized for the items described as S&F /M&L or S&F in repair/M&L for fix in repais. 8. The old unsv items shall be contractors property after deducting the amount from contractors due as per Sch of Credit.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L light shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&Ldark shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L light shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floors etc.laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&Ldark shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L light shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&Ldark shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick cement plaster in CM 1:4 complete all as specified and as directed.

Dismantling glass mosic tiles from water body including cement mortar bedding (but not backing) removing and rubbish off the premiss complete all as specified and as directed.

S&F glass mosiac tiles from water body floor/wall random mix piece size 20x20x5mm thick and sheet size 327x327x5mm joint gap 1.92 by adhesive (cement polymer base) complete all as specified and as directed. Make: Italia/Bisajja/cube mosic

Supply and filling silicone between ACP joints and glass joints to avoid maintain internal tempratere and moisture of rain water complete all as specified and as directed.

Supply and fix SA tape (150mm Wide) to Polycarbonate sheet/other places for avoid to leakage and seepage to rain water complete all as specified and as directed.

Taking up or down steel tubing and connections 15 mm bore of pipe, including removing from site complete all as specified and as directed.

S&F 16mm(OD) and laying of CPVC pipes SDR 13.50 & Plain CPVC SDR 11 fittings in on walls/ceiling or laying in floors trenches complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

Supply only PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and as directed.

Supply only waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

Supply only PVC waste pipe 32/40 For WHB and sink, complete all as specified and as directed.

Supply only 15 mm angle valve/ stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union, complete all as specified and as directed.

Supply only bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and as directed.

Supply only 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified and as directed.

Supply only in replacement mixing valve 15 mm bore, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings, complete all as specified and as directed.

Supply only PTMT grating with 100mm dia of approved make including fixing with 1:4 CM to floor/ nahni trap etc., complete all as specified and as directed.

Supply only grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc., complete all as specified and as directed.

Supply only brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe, complete all as specified and as directed.

Supply only health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply only plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F in repair stainless steel sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,including sheet cover and flush pipe of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and as directed.

Supply only PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary and 40mm brass (CP) waste coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/ steel windows, complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm, complete all as specified and as directed.

Supply only aluminium alloy sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply only MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed

Supply only extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and directed

Supply only aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and as directed.

Supply only door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as specified and as directed.

Supply only brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP, complete all as specified and as directed.

Supply only PVC handle for low level flushing cistern of any capacity (Make : Prayag/ Hindware/ Parryware)

Supply only Flushing kit complete (containing handle, float valve, syphon washer, PVC nut etc complete set) for low level flushing cistern .

Supply only PVC washer for syphon i.e. of low level flushing cistern of any capacity 15 mm bore

Supply only PVC washer for syphon i.e. of low level flushing cistern of any capacity 20 mm bore

Supply only GI socket 15 mm ISI mark

Supply only GI socket 20 mm ISI mark complete all as specified

Supply onlyElbow GI 15mm dia complete all as specified.

Supply only Elbow GI 20mm dia complete all as specified.

Supply only Elbow Reducer GI 15x20mm dia complete all as specified.

Supply only Elbow Reducer GI 15x25mm complete all as specified.

Supply only Nipple GI 15x100mm long ISI marked complete all as specified.

Supply only Nipple GI 20x100mm long ISI marked complete all as specified.

Supply only Nipple GI 15x50mm long ISI marked complete all as specified.

Supply only Nipple GI 20x50mmlong ISI marked complete all as specified

Supply only Nipple GI running 15mm x 75mm long ISI marked

Supply only Tee GI equal 15mm dia complete all as specified

Supply only Tee GI equal 20mm dia complete all as specified

Supply only Tee Reducing G.I 15 x 20 mm complete all as specified

Supply only Tee Reducing G.I 15 x 25 mm complete all as specified

Supply only Tank nipple 15/20 mm complete all as specified

Supply only Union G.I 20 mm dia, ISI Marked complete all as specified

Supply only GI plug 15mm complete all as specified

Supply only GI plug 20mm complete all as specified

Supply only Socket reducer 15x20 mm dia, ISI Marked

Supply only Sprindal (face) full turn/ half turn of any no

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 10mm thick rendering with in CM (1:6) over a coat of 5 mm in CM (1:4) plaster on faces of brick or concrete surface,complete all as specified and as directed.

M&L for 10mm thick rendering within CM (1:6) plaster on concrete surfaces of wall, complete all as specified and as directed.

M&L for 5mm thick rendering within CM (1:3) plaster on concrete surfaces of ceiling, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface, complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and filling of holes with filler material and applying 1 to 2 mm thick wall care putty in two layers on whole wall surface including grinding with sand paper and levelling the surface and than applying two coat of oil bound distemper on white or tinted surface over existing prepared putty based surface, complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash, complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coats of white wash, complete all as specified and as directed.

M&L for preparation of undecorated surface of ceiling and applying two coats of white wash, complete all as specified and as directed.

M&L for complete removal of existing treatment from external surfaces of wall by electrically operated grinder thereafter filling of holes and cracks with filler material and than applying two coat of cement based paint over a coat of with alkali resistant primer, complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar, complete all as specified and directed.

M&L brick with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surface is to be finished even and smooth ( without using extra cement of lime) in CM 1:4, complete all as specified and as directed.

M&L for resecuring, easing and adjusting with out taking down of Shutters of any description exc 1 Sqm but n exc 2 Sqm each all as specified and directed.

S&F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and as directed.

Demolition of cement concrete in of any description and in any position, complete all as specified and as directed.

M&L for cement concrete type B0(1:2:4), using 12.50 mm graded stone aggregate, of thickness 25mm, as in roof padding alongwith liquid water proffing compound, complete all as specified and as directed. Note: liquid water proofing compound shall be paid and measured seperately.

M&L for cement concrete type B1 (1:2:4), using 20mm graded stone aggregate as in roof kerbs or mud stop rounded or chamfered on edge etc., complete all as specified and as directed.

Supply only liquid water proofing compound, complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres, complete all as specified and as directed.

All as per item no 96 above but exceeding 500 litres but and not exceeding 1000 litres, complete all as specified and as directed.

S&F 500 ltr capacity tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

All as per item no 98 above but 1000 litres capacity, complete all as specified and as directed.

S&F in repairs ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20/25 mm bore and fixed, complete all as specified and as directed.

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20/ 25 mm bore, complete all as specified and as directed.

Demolition of reinforcement cement concrete of any discription and in any position, including cutting of reinforcement from adjoining RCC component to faciliate demolition, complete all as specified and directed by engineer-in-charge.

M&L for RCC 1:2:4 type B-I using 20 mm graded stone aggregate (Nominal Mix) as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like, complete all as specified and as directed.

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including muld seel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

All as per item no 104 above but 5mm dia and over upto and including 10mm dia in stirrups, complete all as specified and as directed.

M&L for from work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer all as per above item complete all as specified and as directed.

M&L for chipping of spelled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhesive on complete exposed surfaces of concrete and provide gunniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :2 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding , shuttering necessary chased to brick work or RCC members at any height upto full height of buildings including removing of small trees shrubs etc complete all as specified and directed. (Note: Steel mesh to be welded with the existing reinforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.)

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed by engineer-in-charge.

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling and fixing in opening as per specification and drawing, complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing, complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete, complete all as specified and as directed.

S&F stainless steel barrel tower bolts, 150 mm long, complete all as specified and as directed.

S&F stainless steel handles, 150 mm long, complete all as specified and as directed.

supply only push button for concelled flush tank all respect as specified and directed (Make Parryware/Jaquar).

Supply only chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed(Make Parryware/Jaquar/Cera/ Hindware/ Prayag).

Taking up or down steel tubing and connections including cleaning for re-fixing, 20mm bore of pipe, complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and as directed.

S&F 20mm(OD) and laying of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in on walls/ceiling or laying in floors trenches complete all asspecified.

Refixing 20mm bore old steel tubing obtained from serl item No 119 here in before and connections in new or old position (Walls, ceiling, floors, etc.)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F 200mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls

S&F 200mm dia PVC (SWR) bends any radius

S&F 200mm dia PVC (SWR) junction single, (Single T) equal or unequal

M & L for preparing bituminous surfaces of road/concrete and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed.

M&L Endura out door tile 30x30x 10-15mm thick gloss finished over a coat of 15 mm th screed bed in CM(1:6) complete all as specified and as directed.

S&F in repairs aluminium composite panels cladding of approved make having total thickness of 4mm (Top coil-0.5mm, non toxic PE-core-3mm and back coil-0.50mm) with 25 micron PVdF coating on top coil and polyester/epoxy coating on back coil (4-7 microns) on aluminium substructure fixed with 19mm x 12mm x 1.6mm aluminium cleat & 10 x 100mm SS wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular/ circular columns, suspended ceiling cills, jambs, canopy with including necessary aluminium frame, scafolding etc and making 12mm to 20mm wide grooves and applying non staining and non streaking sealant of Dow corning (789 or 991 HP) and backing rods and approved shed by Engr-in-Charge. Only exposed surface shall be measured and paid for ACP material shall be for exterior application & of shade as approved by Garrision Engineer. Note:- The work is to be carried and upto 18mtr height of building and rate quoted by the tenderer are deemed to be included for scaffolding and work upto a height of 18 mtrs.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

verma enterprises (BID ID -3064601)

P R Constructions (BID ID -3065096)

M/S Malik Construction Corporation (BID ID -3079968)

M/S Parmod Johar (BID ID -3062298)