Protection wall at the backside of the school building, some portion of B/wall , Plinth protection work, minor repair of walls and floor etc at NPS Dandi

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Cement sand Plastering in 1:6 mix 20mm thick

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 801itre/1 Osqm of approved brand and manufacturer

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/1 Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications

Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R.

DEV RAJ GOVT CONTRACTOR

RAVINDER KUMAR GOVT CONTRACTOR

Sadam Hussain

SANJAY KUMAR GOVT CONTRACTOT