M/O Roads (Annual Maintenance of Central Verge and Footpath in WC-4 Area), Noida.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5 m, disposed earth to be bevelled and neatly dressed.: The Contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone calbe, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer - in-Charge.Allkinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil.

Cement Concrete with 4 cm gauge approved stone ballast ,coarse sand & cement in the proportion of 8:41 including supply of all materials, labour, tools & plants etc. Required for proper completion of the work.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand).

Providing and laying C.C.Pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete laid and finished wih screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately) (Npte :- Cement content considered in ths item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately)

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed wikth cement mortar 1:3 (1 cement : 3 coarse sand), including making joint with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)

Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish etc., disposal of unservicealbe material of the dumping gound, for which pavement shall be made separately and stacking of serviceable material within 50metre lead as per direction of Engineer-in-charge.