Rori Kapura

Amount

5.2 (i)/Carriage of Material Jallalabad Sand Lead upto 80 km 6km to 40 km

41km to 60 km

61km to 80 km

5.2 (i)/Carriage of Material Pathankot Sand Lead upto 260 km 6km to 40 km

41km to 60 km

61km to 150 km

151km to 245 km

8.31/Scraping cement Plaster inside Tank

9.8/Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

10.21/Reinforced cement concrete M-20 mechanicaly batch mixwd using batch type concrete mixer as per IS 1791 & vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

13.13/Terracing consisting of tiles 22.86x11.43x3.81cm laid over 25mm mud plaster, 75mm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot @ 1.65kg/m² on top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left cleaned after wire brushing etc.

14.10/Conglomerate floor 50mm thick CC 1:2:4 on 100mm CC 1:8:16 and 100mm sand or stone filling

15.6-15.3/Extra for additional 4mm thick cement plaster in 1:5 on LDPE film in Bed

15.7+15.48/12.5mm thick cement plaster in 1:2 inside with cement rendering on plaster 1mm thick

15.41/6mm thick cement plaster in 1:3 under ceiling

15.66/Cement pointing 1:2 flush on brick on edge flooring

17.10(iii)/Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.

18.18/Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

18.24/Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter.

19.16/Extra allowance for scaffolding in tile, brick and concrete lining for side slopes only.

28.2+28.13+28.18/Providing, Laying , fixing & jointing of P.V.C. Pipes including special as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by Mechanical means and refilling in origional condition. PVC 6kg/cm2 (xii)/ 63mm o/d pipe of 6 Kgf. / sqcm

(xiv)/ 90mm o/d pipe of 6 Kgf. / sqcm

28.27A/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (a)/80mm i/d Sluice Valves flanged

28.51/Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- (a)/Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

28.66/Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b)/Size 0.90 m. x 0.90 m.

28.90/Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

29.26/First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

NS/Providing and placing black LDPE film 250 thick (confirming to B.I.S. 2508/1984 revised up to date amendments) on side slopes and in bed including sealing overlaps as per industrial best practice ( keeping minimum overlap 45cm wide)

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect. (a)/Top Layer

(b)/2nd to Bottom Layer

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On New Pipe Line)

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/Silt Clearance from S&S Tank

NS/Repair of Existing Sluice Valves 80mm i/d at Filter Bed.

NS/Repair of Existing 100 mm i/d Sluice Valves at Pump Chamber.

NS/Providing and fixing Shunt Capaistor for Control Pannel.

NS/Providing & fixing Control Switch, ampier meter for control panal.

NS/Repair of Starter

NS/Providing & Fixing cutout for control panal

NS/Repair of Panal Board and Door etc.

NS/Repair of Raw Water Motor and Pump of 7.50 BHP

NS/Repair of Pump of Clear Water Motor 17.50 BHP

NS/Provision for Paint on Sign Board

NS/Providing, installing, testing & commissioning one no. Electronically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivery pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification. (Make Milton roy)