Repair of Diesel Engine and 03 Cusec discharge pump set of Drought Station Seelam with allied works.

Repair of Diesel Engine and 03 Cusec discharge pump set of Drought Station Seelam with allied works.

Dismantling the RV 33/3 cusec diesel engine driven pump from suction and delivery pipes and decoupling the pump from engine shifting to road side with the help of manual lavour using tool and tackles.Loading in the transport using crane for shifting of engine and pump set to workshop from site of installation for repair. Loading of the repaired RV 33/3 cusec diesel engine driven pump set from workshop in transport vehicle using tools and tackles, manual labour. Carriage to nearest road side point at Seelam. Shifting from road side to site of installation using manual labour, tools and tackles including head load. Job includes cost of labour charges, loading and unloading charges, hire charges of crane, tools and tackles, mechanical transport (to and fro). c/job Complete dismantling of three cylinder RV33 engineat workshop. Extraction of damaged parts i.e crankshaft, piston with rings, head, valves etc., P/F of new pistons with rings 3 Nos, cylinder liner 3 Nos, guides 06nos, inlet and exhaust valves, piston pins, new main and big end bearings 03 nos, C.R. Bushes 3 Nos, pushrod 06 nos, gaskets sets, P/F of M oil and diesel filter set P/F of exhaust manifoldand silencer along withgasket sets, new nuts and bolts, studs. P/F of complete air filter assembly with required clamp and manifold, fuel pipes set with banjo bolt, thrust washers, hoses set, nut bolts and repairs to cylinder head. Draining of contaminated M. oil from the oil sump cleaning the sump with appropriate chemical then providing and filling 13 ltrs (approximately) of fresh M. oil.Repair to the crank shaft by way of grinding and finishing to the required precision size. Adjustment to the rocker and tappet assembly. P/F of new 12V 150A heavy duty lead acid battery 01 no and self-starter one no and alternator 01 no along with required cable, clamps, and required nut and bolts after extracting the old damaged one. Complete repair to radiator assembly by way of dismantling the upper and lower tank and then cleaning the tubes and both the tanks with appropriate chemical. Plugging the leakage by way of brazing and testing for leakage. Complete job includes cost of material and labour charges, carriage and fitment charges at Drought station Seelam and then testing of the engine on no load conditions. C/job. (one Job) Repairs to 3 cusec discharge pump at workshop by way of extraction of damaged parts. The job includes providing and fitting of new shaft and machining it to accurate size and profile as per sample. Repairs to pump Impeller by way of remetalling and finishing to required shape and size. P/F of new gland bushes-02 no., impeller wearing rings-01 no., and new CI gland plates. The job includes replacement of gland packing, oiling and greasing, complete assembly of the pump set after carrying out necessary repairs. Complete job including cost of material and labour charges. Installation of the RV33/3 cusec diesel engine driven pumpset by way of fitting the M.S. Pipes, foot valve, and bends. P/F of new nuts and bolts, synthetic rubber packing. P/F of new coupling set after extracting the old damaged coupling set along required nuts and bolts. The job involves boring of coupling pulley and cutting of key way as per sample of old coupling pulley and fabrication of cotter as per requirement. Repair to foot valve of 6” f of drought station Seelam by way of dismantling of foot valve at workshop, fabrication of resting plate out of MS plate by turning, boring, drilling holes as per size and making proper hinge arrangement for lifting plate. P/F of leather washer cut to size. P/F new strainer of desired size. Fitting the foot valve with suction pipe by P/F of rubber sheet joint along with new nuts and bolts of required size. Lowering down the suction pipe with foot valves in the nallah and then aligning the suction pipe with other portion of suction and fitting it by P/F of rubber sheet joints along with new nuts and bolts at site. Complete job includes cost of material, labour charges, and carriage charges, hire charges of welding/cutting set and other tools and tackles required for execution of work. C/job (one Job) Overhauling and calibration of fuel pump by dismantling and then P/F of new parts i.e injector nozzles 03 nos, new D- valves 3Nos, element 3Nos, plungers, springs, lock set,nuts & bolts etc. P/F of governing set, seals, washer, diaphragm washer, then calibrating the pump on calibration bench and fitting with engine and testing the engine on no load, complete job with cost of materials and labour charges.

Rebate on Old Parts

M/S FASTTRACK ENGINEERS

Rishabh Electricals and Mechanical Works

Rishabh Electricals and Mechanical Works