Supply, Installation, Testing and Commissioning of Central Heating System at SDH Tangdar, Kupwara.

SITC of Horizontal, HSD fired, coil type Hot Water Generator of capacity 2 lac kcal/hr. each complete with combustion equipments, control panel, control valves & other accessories.

SITC of chimney for 2 lakh kilo calories per hour Boiler of required dia., flue gas duct as recommended by OEM and as per pollution norms with externally mounted support raising at 12 m above ground level, including all civil works.

SITC of 3-phase Hot Water Circulation Mono Block Pump complete with TEFC electric motor with Class 'F' insulation, mechanical seal suitable for hot water application up to 90°C, along with butterfly valves (2 Nos.), Y-strainer (1 No.), NRV (1 No.), pressure gauge with stand pipe and gauge cocks (2 Nos.), temperature gauge (2 Nos.). Pumps are to be mounted on a common base frame duly grouted in cement concrete foundation. Capacity 620 LPM at 11 m Head. HP of motor shall be corresponding to Head & Discharge.

SITC of Geared Oil Transfer Pump with electric motor of 3-phase, 3 HP rating along with common base frame duly grouted in cement concrete foundation. Suction 50 mm, Delivery 40 mm, Capacity 50 LPM.

SITC of soft Water feed Pump complete with electric motor of 3-phase, 1 HP rating along with common base frame duly grouted in cement concrete foundation. Capacity 50 LPM at 15 m Head.

SITC of Bulk oil tank 20 kl complete of 6/8 mm MS plate with manhole dully covered to be laid underground with calibrated dipstick, allied Civil Works as per IOC Norms and keeping in view the water table of the area along with necessary connections including vent pipe, decanting pipe etc. Capacity = 20000 Litres, size 2.5 m DIA × 4.1 m long.

SITC of Hot water mixing tank made of 6/8 mm M.S. Plate with dished ends, manhole dully covered and with necessary connections covered with 50 mm Glass Wool insulation and finished with 24 Gauge Aluminium cladding and complete with structural support to raise the tank at least 300 mm above finish FL. Capacity = 3000 Litres, size 1.25 m DIA × 2.5 m long.

SITC of Day oil tank of 4 mm M.S. plate complete with manhole dully covered, Gauge Glass, 3 kW Oil Heater, with necessary connections and with suitable structural support for mounting oil tank and ladder made of tubular MS Section and 24 Gauge Aluminium cladding insulation complete. Capacity: 1000 Litres, each size 1 m × 1 m × 1 m.

SITC of Hot Water Expansion Tank of 4 mm M.S. thick sheet, With manhole dully covered, necessary connections covered with 50 mm Glass Wool insulation and finished with 24 Gauge Aluminium cladding and structural support for mounting Expansion tank with insulation and cladding. Capacity: 1000 Litres, size 1.0 m × 1.0 m × 1.0 m.

SITC of Soft water tank of HDPE (Five layer) with necessary connections complete with pipe fittings, valves, pedestal, and other allied fittings etc. Capacity: 2000 Litres.