REPAIRS TO PERIMETER SECURITY WALL, PATH, HARD STANDING AND DRAINS AT CABS, INS TANAJI, NOFRA AND NSB UNDER

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion of concrete and making good disturbed in ground etc complete all as specified and directed.

Dismantling old chain link fencing of any size or mesh etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

Dismantling of brick work /stone bouldersbuilt in cement mortar including all quins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for brick work in CM (1:6) using sub class 'B' bricks strainght or or curved as curved as required on plan exc 6mtrs mean radius etc complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, as in wall etc complete all as specified and directed. Note: PCC bond stone and face work shall be measured and paid separately.

All as per item No 8.00 above but except stone etc complete all as specified and directed.

M&L Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), in cluding all mouldings but excluding frame type C0 1:3:6 (using 12.5 mm graded aggregate) setting in cement mortar 1:6, etc complete all as specified and directed.

Excavation in trenches,n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in soft/loose soil any type of soil etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in foundations,filling and mass concrete etc complete all as specified and directed.

M&L for pre-cast cement concrete block masonary with solid blocks(1:2:4) (20mm graded agg), exc 10 cm in width and setting in cement mortar 1:6 Type B-1 (using 20mm gradedaggregate) etc complete all as specified and directed.

Returning,filling in,including spreading, levelling,watering and well ramming in layers n.exc 25cm thick in soft/loose soil etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement etc complete all as specified and directed.

M&L for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 20 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course etc complete all as specified and directed.

M&L for raised pointing to random rubble masonry uncoursed or brought upto courses in CM 1:6, etc complete all as specified and directed.

M&L of cement concreteType B-2 1:2:4 (40 mm graded aggregate) posts (including caps and bases) bed blocks , retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded agg as in coping etc complete all as specified and directed.

S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessar drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165 etc complete all as specified and directed.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing etc complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 gde E etc complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc sheets in roof coverings etc complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S&F Polycarbonate Hollow sheet 10mm thick of an colour having tensile strength of 60.30MPa as in roof covering/cladding to wall, fixed with self tapping screwsand including aluminium channel strip etc complete all as specified and directed. Note: Colour to be approved by GE

S&F aluminium anodised section (minimum thickness of anodising shall be 15 micron) for fixing polycarbonate multiwall hollow sheet with and including EPDM gasket as in roof covering / cladding etc complete all as specified and directed. (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of EPDM gasket etc shall also be deemed to be included in the quoted rate.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type etc complete all as specified and directed.

M&L for PVC coated galvanised chain link fencing of wire mesh size 50 mm x50mmx3mm weighing not less than 2.18 kg/sqm (weight inclusive of PVC coated) PVC coated line wire etc including fixing line wire to angle iron posts / rails straining bolts with provision of binding wire etc complete all as specified and directed.

S&F in repairs barbed razor type concertina coil DG hot galvanised spring for site wire as approved by GE, 1.45 to 1.50 Kg/metre and dia of coil when stretched 610 mm etc complete all as specified and directed.

S&F steel scews bolts (Machine made) made hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but nexc 10 cm long dia of shank 5 to 10mm etc complete all as specified and directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provn of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of previously untreated surfaces of steel and iron exc 10 cm width or girth etc complete all as specified and directed.

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc complete all as specified and directed.

Dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish etc complete all as specified and directed.

M&L for reinforced cement concrete in M-25 RMC (using 20mm graded aggregates) for mass concrete , footing foundation making smooth surfaces using extra cement etc complete all as specified and directed.

M&L for joint cutting in concrete surface 8-10mm wide mechanically and filling with polyurethane material upto 12-15mm from the top surface etc complete all as specified and directed.

Supply and Installation & stamping on the freshly laid new concrete including finishing & coloring the top surface accurately to the required level, shape and size (min 4mm thk.) using approved colour shade Colour Hardener and Powder Release Agent and stamping it using approved stamp pattern and antiquing it on top with approved colour using Antiquing Agent Sealing the entire area of stamped concrete using Concrete Sealer. Including staining the extra and above the stamping surface with Acid/Dye/Enviro stain before application of sealer,including formwork with M.S. angle and compaction of concrete etc complete all as specified and directed.

M&L 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) AS in sub base of flooring etc complete all as specified and directed.

M&L 20 mm thick Baroda Green Marble Stone Slabs as in flooring, treads, risers, landing etc bedded, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of slab including cutting and polishing, laid over and including 15 mm thick screed bedding layer in CM 1:4, etc complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match (Colour to be approved by GE) etc complete all as specified and directed.

M&L for Durastone Heavy Duty vitrified tiles (300x 300) x 10-12 mm thick in floor set and jointed with neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 etc complete all as specified and directed.

M&L for broken stone or boulders hardcore of guase n.exc 63 mm depositing, spread and levelled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces etc complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including 25 mm thick sand cushion etc complete all as specified and directed.

M&L for Pre Polished Chequred cement concrete tiles 30cm x 30 cm x 20 mm thick, set, jointed and pointed in near cement slurry in floors with mixture of grey white cement in equal proportions over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 etc complete all as specified and directed. Make :- Gems / Orient/ Nitco/ NTC or equivelent

M&L in repairs for synthethic outdoor sport surface. 8 layer cushion system over a leveller 1. The first layer consists of one coat of bio cum primer, 2. Thereon Application of one Coat of resurfacer 3. Three coats of Cushion Coats 4. Thereafter two textured coats 5. Finally one Non-Textured Coat . 6. Court line marking.

M&L for PCC 1:2:4 type B2(20mm graded aggregate) as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto etc complete all as specified and directed. Note : A sum of Rs 34,980.00 towards sch of credit shall be deducted to arrive the contract sum.

H R ENGINEERS

sahajanand const co.

M/s Hari Om Construction

Parmatma Enterprises

mp construction co

Atharva Enterprises