Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43.2 LAccepted-Finance | 1 | Accepted-Finance qualified | |
| 2 | 2₹47.7 L+₹4.5 L (10.3%)Accepted-Finance | 2 | Accepted-Finance qualified |
Tender Value
Refer Docs
EMD Value
₹86,700
Closing Date
9 Nov 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Ex Engineer
Office of Ex Engineer MID Ang HQ Awantipora
Repairs Renovation and restoration of LIS Kanjikulah by way of Providing Fitting Installation Testing and Commissioning of Various Electro Mechanical Equipments with allied works
2023_IFC_235514_1
50/MIDA of 2023-24
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
45 days
Kanjikul
Repairs Renovation and restoration of LIS Kanjikulah by way of Providing Fitting Installation Testing and Commissioning of Various Electro Mechanical Equipments with allied works
2 documents required · 2 mandatory
₹500
Yes
Ex Engineer MID Ang HQ Awantipora
₹86,700
Yes
Awantipora
21 Nov 2023
1 Nov 2023
10 Nov 2023
1 Nov 2023
9 Nov 2023
2 Nov 2023
2 Nov 2023 - 2 Nov 2023
2 Nov 2023
Amount
Rising Main: Fabrication, providing, installation and testing of Mild Steel Pipe of 250mmND with 6.3mm wall thickness. The pipes shall be painted in two coats of anticorrosive bituminous paint over one coat of steel primer.The overall specification of the pipe shall be as under: Outer dia. = 273mm Wall thickness = 6.3mm Type of welding = ERW Grade = Fe410 Quality of Mild steel to be used for manufacture of pipes= As per IS 10748 with latest amendments Pipe to be manufactured as per IS-3589 with latest amendments The Pipes shall be welded together using high quality Electrodes of Ador/ Esab in 2 Runs and the weld shall be of smooth finish and free from defects. The pipe shall be laid under/above ground as per site requirement .Pipe Manufacturers test certificate to be appended.
Flanged Suction/ Delivery pipe: Fabrication, providing, installation, testing and commissioning of Mild steel 200mm nominal dia. Pipe with 6.3 mm wall thickness with M.S flanges at the ends as per requirement/ directions of Engineer in Charge. The job includes fitting material like nuts/bolts & RI Cloth washer etc and painting of the pipes in one coat of steel primer and followed by bituminous paint. The overall specification of the pipe shall be as under: - Outer dia. = 219mm Wall thickness = 6.3mm Type of welding = ERW Grade = Fe410 Quality of Mild steel to be used for manufacture of pipes= As per IS 10748 with latest amendments Pipe to be manufactured as per BIS-3589 with latest amendments. All allied flanges (including that of valves) to be fitted to the suction and delivery pipes shall be as per IS 6392 (Table 11) Pipe Manufacturers test certificate to be appended.
Flanged bend: Fabrication, providing, installation, testing and commissioning of 200mm dia. Mild steel Flangedbend as per site requirement for suction side duly fitted with M.S flanges at both the ends. The bend shall be fabricated out of 6.3 mm thick M.S plate. The job includes applying one coat of steel primer and two coats of bituminous paint. The allied flanges to be fitted to the suction and delivery pipes shall be as per IS 6392 (Table 11).
Manifold: Fabrication, providing,fitting and testing of Delivery manifold of size 300mm ND 6.3mm thick and 6 Metre Long to serve as a common header for 200mm Dia pipes for 2 No of Pumping Units outside the Pump House. The job includes connecting of the delivery lines of the pumping equipment and the 250 mm Dia Rising Main with the Manifold and includes fabrication of bends offsets etc if any as required for the execution of job.
Dismantling Joint: Fabrication, providing, fitting and testing and commissioning at site Mild steel pipe Slipon joint (Dismantling Joint) of 200mm ND fabricated out of 12mm M.S plate duly rolled in perfect circular and turned to proper size as per the drawing enclosed. The job comprises of two No. tail pieces. NO.I- The number I pipe piece shall be welded with the two number flanges of 25 mm thick on both sides at an axis of 90 degree and welded in two coats The joint should be smooth, flaw less and continuous. NO. II- The number II piece shall be flanged on one side and turned to the side of inner dia of the flange with smooth finish. NO.III- One number guide flange of 35mm thick shall be fitted to accommodate rubber insertion cloth washer from the back side so as to make the joint leak proof. The flange No.II shall be welded and fitted on turned piece to press the sealing material to make front and back easiness to the joint for dismantling and refitting. Specification of mating flange: The flanges required for fitting of slip-on joint to 200 mm ND Rising main shall be inconformity with the flanges of slip on joint and shall be as per IS 6392 with latest amendments. The job includes providing and fitting of suitable size M.S nuts and bolts etc for fitting of the same. The Slip-on joint shall be painted with one coat of steel primer and synthetic enamel paint. The job includes testing of same at full load.
Supply installation and testing of DN 200, PN 1.0 sluice valves conforming to IS 14846 with latest amendments or equivalent international standard to following specification: - Material of construction: - a) Body, Bonnet : Ductile iron GGG40 (EN-JS-1030)/Spheroidal Graphite iron b) Wedge : Ductile iron Ductile iron GGG40 (EN-JS-1030)/ SGIron c) Spindle/Stem :St Steel as per IS 6603 d) Stem nut :Bronze Grade LTB-2 e) Bonnet Gasket : Neoprene/EPDM rubber f) Make: VAG/IVC/SIGMAFLOW/KIRLOSKAR/TALIS/ equivalent Specification of mating flange: The flange required for fitting of shall be inconformity with the flanges of the valve and shall be as per IS 6392.The job included providing and fitting of suitable size M.S nuts and bolts for fitting of valve. Test certificate of the Manufacturer to be provided. The job includes testing of same at full load.
Supply installation testing and commissioning of 200mm DI Reflux Non-return Valve PN 1.0 conforming to IS-5312 with latest amendments or equivalent international standards to following a) Body: Ductile Iron Ductile iron GGG40 (EN-JS-1030) b) Cover : Ductile Iron Ductile iron GGG40 (EN-JS-1030) c) Disc : Ductile IronDuctile iron GGG40 (EN-JS-1030) Coated with EPDM rubber d) Body and seat ring: Bronze Grade LTB-2 e) Surface Protection: Electro static epoxy powder coating. The job includes fabrication of By-pass arrangement for 200 mm dia NRV as under:- i) Creating hole of dia25 mm dia using gas cutter. ii) Providing and fitting of 25 mm dia GI/ Steelpipe of required length along with 02 No. of elbows f reputed make iii) Providing and fitting of 01 no. SS ball valve 25 mm of reputed make Welding: The by-pass arrangement is to be joined by continuous butt welding in at least 2 runs on outside surface of the pipe. Before welding a V-groove is to be made by grinding the edges of pipe by a portable grinder in order to accommodate the welding material to make the joint strong. The welded area shall be chipped properly and flux removed to ensure crack free / leak proof joints on full working pressure. Quality product electrodes of Philips/ ESSAB/ADOR make only shall be used for welding. Specification of Mating Flange: The flange required for fitting of shall be inconformity with the flanges of the valve and shall be as per IS 6392.The job included providing and fitting of suitable size M.S nuts and bolts for fitting of valve. Test certificate of the Manufacturer to be provided. The job includes testing of same at full load.
Providing, Fitting, Installation, Testing and Commissioning of Priming Sewage Submersible pumps (02units) (One fitted to the system and one as a stand by) each of 01 HP capacity Kirloskar/Crompton/KSB/Mather plate make for priming purpose of Three Pumping units with following specifications: a. Type ------ Sewage submersible b. Head ------ 10 Mtrs. c. Phase ------ 1 phase d. Discharge ------ 250 litres /Min e. Power ------ 01 HP/0.75 KW f. Speed ----- 2900 RPM g. Voltage -----220 +/-10% V The priming pump shall be suitable for operation under submerged conditions and shall be suitable for wide water level fluctuations taking place in suction side. The priming pump shall be water immersed and fitted with good quality oil seal and an automatic water level float for tripping purpose during low water level. The job shall include providing /fitting of all the G.I pipes C-class (Approx. =60 Rft.) as per the out let of the priming pump and fittings like ball valve, Nipples, flanges/sockets, Tees, Elbows/Bends, & other allied fittings as required for priming of the Three pumping units and complete installation as required. The job also includes suitable capacity compact starter and P/F of 10mm Sq. Submersible cable=20 metres Note: - Any extra minor related work regarding above, what-so-ever arising during execution of the entire work, shall be in scope of the work and no extra cost in this regard shall be acknowledged by the Department. Manufacturers Test certificate shall be appended.
Supply installation testing and commissioning of 250mm DI Reflux Non-return Valve PN 1.0 conforming to IS-5312 with latest amendments or equivalent international standards to following a) Body: Ductile Iron Ductile iron GGG40 (EN-JS-1030) b) Cover : Ductile Iron Ductile iron GGG40 (EN-JS-1030) c) Disc : Ductile Iron Ductile iron GGG40 (EN-JS-1030) Coated with EPDM rubber d) Body and seat ring: Bronze Grade LTB-2 e) Surface Protection: Electro static epoxy powder coating. The job includes fabrication of By-pass arrangement for 200 mmdia NRV as under: - i) Creating hole of dia 25 mm dia using gas cutter. ii) Providing and fitting of 25 mm dia GI/ Steelpipe of required length along with 02 No. of elbows of reputed make iii) Providing and fitting of 01 no. steel/brass ball valve 25 mm of reputed make Welding: The by-pass arrangement is to be joined by continuous butt welding in at least 2 runs on outside surface of the pipe. Before welding a V-groove is to be made by grinding the edges of pipe by a portable grinder in order to accommodate the welding material to make the joint strong. The welded area shall be chipped properly and flux removed to ensure crack free / leak proof joints on full working pressure. Quality product electrodes of Philips/ ESSAB/ADOR make only shall be used for welding. Specification of mating flange: The flange required for fitting of above valve to 250 mm dia delivery pipe shall be inconformity with the flanges of the valve and shall be as per IS 6392.The job included providing and fitting of suitable size M.S nuts and bolts for fitting of valve. Test certificate of the Manufacturer to be provided.The job includes testing of same at full load
Fabrication, providing, fitting, installation testing and commissioning at site Mild steel pipe Slipon joint (Dismantling Joint) of 250mm ND fabricated out of 12mm M.S plate duly rolled in perfect circular and turned to proper size as per the drawing enclosed. The job comprises of two No. tail pieces. NO.I- The number I pipe piece shall be welded with the two number flangesof 25mm thick on both sides at an axis of 90 degree and welded in two coat. The welding joint should be smooth, flaw less and continuous. NO.II- The number II piece shall be flanged on one side and turned to the side of inner dia of the flange with smooth finish. NO.III- One number guide flange of 35mm thick shall be fitted to accommodate rubber insertion cloth washer from the back side to make the joint leak proof. The flange No.II shall be welded and fitted on turned piece to press the sealing material to make the front and back easiness to the joint for dismantling and refitting. Specification of mating flange: The flange required for fitting of Slipon joint to be fitted to 250 mm dia Rising main shall be inconformity with the flanges of Slipon joint and shall be as per IS 6392 with latest amendments. The job includes providing and fitting of suitable size M.S nuts and bolts etc for fitting of the same. The Slipon joint shall be painted with one coat of steel primer and synthetic enamel. The job includes testing of same at full load.
Providing, installation, testing and commissioning of PN 1.0 rating 50mm DI Double acting Air Release valve with in-built isolating valve (Type: DS1) conforming to IS 14845 Material Specifications: Body, Bonnet/ Cover ----- Ductile iron Stem ------- Stainless steel Floats ------ Stainless Steel Nuts & Bolts ------ Carbon steel/ Stainless Steel Gasket and Seal---- EPDM rubber (Preferred make: Sigma flow/ IVC/ Kirloskar/VAG/ Talis/ Equivalent approved by department) Installation: These air release valves are to be fitted to 250mm ND MS rising main by way of flanged end connections and pipe pieces.
Fabrication, providing, fitting and installation of 250mm diameter Mild steel Expansion joints to be fitted to the Rising main pipe line. The job comprises of following specifications, fabrication details and involvement of material etc. as per the drawing attached: The expansion joint shall have to be fabricated out of Mild steel plate of 12mm thickness dully rolled in perfect circular formation and shall consists of: - I. Female pipe piece. II. Male pipe piece. III. Gland. IV. Flanges. I)Female pipe piece: - Female pipe piece shall be fabricated out of Mild steel plate having thickness 12mm and diameter as 250mm, 275 mm and 300mm. The length of each pipe piece shall be 150mm duly welded with each other. The central piece shall be duly turned and finished to proper size to accommodate the male piece with its easy movement to and fro during expansion and contraction process. The female pipe piece shall be welded with M.S flange on both sidesi.e 250mm and 300mm. II) Male Pipe Piece: - The male pipe piece shall be fabricated out of the Mild steel plate having thickness 12mm duly rolled in perfect circular formation and having a length of 500mm The male pipe piece shall be turned to accurate size on lathe machine to give easy movement during operation. III)Gland: - The Gland shall be fabricated out of 12mm thick Mild steel plate having length of 150mm duly turned to move over the male piece in order to make the packing material tight and avoid leakage. The gland shall be flanged on one side for lifting of the gland during operation. The job includes painting with one coat of steel primer (Anticorrosive). The job also includes providing and fitting of nuts and bolts, etc. IV)Flanges: -The flanges shall be as per the size compatible to the system and as per details of drawing attached.
Fabrication, providing and fitting of 250mm Mild steel flap valve to be fitted to the Rising Main pipe line. The flap valve shall be fabricated out of Mild steel plate and shall be of the following specifications: - a. Thickness of body of flap valve = 8mm b. Flange thickness = 25mm c. Thickness of flap plate = 18 mm d. Length of valve from upper side= 300mm e. Length of flap valve from lower side = 450mm The flap valve shall be fitted with Mild steel ring all along the periphery on which the flap plate shall rest. A suitable heavy duty Mild steel hinges shall be fitted on the top of the valve. The flap valve shall be painted with steel primer. The job also includes providing and fitting of nuts and bolts and rubber insertion cloth washers etc.
Fabrication, providing and fitting of Working platform to be fabricated out of ISMB 200 and to be erected on the Sump to form the Rectangular Rigid framed structure of Size 6.5 m x 1.5 m approximately. The details of the material involved are as under: ISMB 200: (2x6.5m) +(3x1.5) m=17.5 Mtrs The ISMB-200 Main Girder shall be welded together through the bracings/stiffeners of ISLC 75x40 mm at specific spots The job includes providing and fitting of M.S. Chequered plate 6mm thick to the rectangular ISMB frame of size 6.5mx1.5m with necessary bracings out of ISA 50x50x6 as per the drawing. The job also includes cutting of suitable opening at the requisite spots for erection of the Suction pipes. The job is to be carried out as per the instructions of Engineer in-charge. The complete structure is to be painted with one coat of steel primer followed by two coats of super enamel of desired shade of a reputed make. Note: However, the dimensions may increase or decrease depending upon site conditions for which the firm shall visit the site
Fabrication, providing, fitting, installation, testing and commissioning of 1-Ton Capacity Sump Gantry. The job comprises of the following specifications of the material alongwith the involvement of material and process of fabrication -- a) Vertical supports: - Fabrication, providing and installation of Gantry vertical supports (2 Nos.) to be fabricated out of Mild steel angle Iron of size 40x40x6mm. The posts shall have to be fabricated as per drawing appended. The vertical posts shall be fabricated in four pieces of angle iron having 5 Mtrs effective Height and its strengthening /bracing by horizontal members to be placed after every 3 feet and diagonal members as per requirement out of same angle section as used for the vertical members. The size of the angle Iron post shall be 1.75feet at the bottom and 1.25 feetat the top. The vertical angle iron posts shall be provided and welded with Mild steel plate having 10mm thickness welded at the bottom and top duly drilled with suitable diameter holes. The Bottom portion of the vertical support shall be embedded into the cement concrete block of suitable size to be laid in the ratio of 1:2:4. The posts thus fabricated shall be erected at the two sides of the sump gantry. b) Gantry Beam: - Providing and fitting of Main I beam (Horizontal) of size ISMB-200 and having a total length of 7.5 Mtrsfitted with Mild steel plate of the same size10mm thick, with nuts and bolts along withwelding as per requirement. The job also includes providing and fitting of nuts and bolts and all consumables required for erection of the structure. c)Monorail and chain pulley block: - Providing and fitting of 1-Ton capacity travelling trolley of spur gear type and 1-Ton capacity Chain Pulley block having 6mtrs. Lift. The chain pulley block and the travelling trolley shall be of Pull Lift/ Indef/ Globe make. Manufacturers test certificate shall be provided at the time of supply of equipment.Note: However, the dimensions may increase or decrease depending upon site conditions for which the firm shall visit the site. The complete structure is to be painted with one coat of steel primer followed by two coats of super enamel of desired shade of a reputed make.
Design, manufacture, supply, erection, testing and commissioning of 3-ton capacity overhead monorail travelling crane for handling of electro-mechanical equipment with following specifications. a. Basic Crane Requirement. i. Capacity: 3 Ton ii. Length of Runway girder: 8.75 metres iii. Length of Bridge girder: 5.5metres b. Bridge Girder: Bridge girder 5.5 Meters long fabricated out of ISMB 250 section is to be fitted with 2 No. end carriages fabricated out of ISMC 150 section and other suitable MS members. Each end carriage is to be fitted with 2 No. MS wheels of suitable size with suitable ball bearings. The two end carriages are to be coupled with each other by way of MS shaft and suitable gear reduction mechanism. The shaft is to be supported on Plummer blocks held by MS brackets. These brackets are to be welded to the bridge girder. A pulley fitted with the shaft is to be provided with an endless chain of 6 Meters to facilitate the movement of end carriage along with bridge girder. c. Runway Girder: Runway girder (2 Nos.) 8.75 meters long fabricated out of ISMB 200 with ISMC 150 with 25 mm M.S square barwelded on upper flange for movement of drive / driven wheels. The square bar is to be aligned perfectly and finished smoothly by machining for facilitating smooth movement. d. Monorail: One unit 3-Ton capacity heavy duty monorail, suitable to operate through endless chain of 6 meters is to be mounted on lower flange of bridge girder to facilitate travelling movement of hoist load. The movement in longitudinal and transverse direction is to be limited by way of providing and fitting 4 No. suitable MS end stoppers of adequate strength to absorb the impact of moving monorail (with load). e. Hoist/ Chain Pulley Block: 3 Ton 6m lift capacity chain pulley block mounted on monorail travelling trolley and operated from floor through an endless chain of make Pull Lift/ Globe/ Indef is to be provided. The whole job and its components are to be executed as per relevant IS Code. f. Vertical Post; Providing and fitting of 200mm Nominal dia. 5.6mm thick MS structural tube to act as vertical posts to the running girder. The post shall have height of 6mtrsapprox and shall be provided with 2 No. MS Plates of size 0.4x0.4m, thickness 10mm. The plates shall be welded on both sides and the lower side shall be embedded in cement concrete block and the upper plate shall be welded with running girder of gantry (04 No. Posts) Manufacturers test certificate shall be provided at the time of supply of equipment.Note: However, the dimensions may increase or decrease depending upon site conditions for which the firm shall visit the site The complete structure is to be painted with one coat of steel primer followed by two coats of super enamel of desired shade of a reputed make.
Fabrication, providing, installation and fitting of Mild steel Trash rack to be fitted on the mouth of the intake channel. The trash rack shall be fitted in the existing grooves of the cement concrete walls of the intake channel. The trash rack shall be ridged structure. The size of the trash rack shall be 6.25 Feet x 5 Feet (Approx.) as per site dimensions The frame of the trash rack shall be fabricated out of Mild steel channel of size ISMC-100 and a stiffener of M.S angle Iron of size 50x50x6mm which shall have to be fitted in between the trash rack for its additional strength. The frame shall be fitted with Steel Flat Iron strips of size 50mmx6mm welded vertically at a spacing of 2” from centre to centre. The Mild steel flat Iron strips shall have to be welded properly with the channel Iron frame. The job also includes painting of the trash rack with a coat of steel primer followed by 02 coats black bitumens paint
Dismantling of Old damaged M.S Pipe of 200 mm Dia laid underground/above ground by way of exposing all underground portion of the existing Rising Main, then dismantling of complete pipe line by way of cutting the welding joints by Gas cutter and shifting of the same to Divisional Store Padgampora. The job includes all tools tackles required for dismantling of the pipe line including its loading /unloading stacking and transportation.
Starter: Supply, Installation, Testing and Commissioning of AC-3 duty 415V 75 HP 3 Phase Fully Automatic Star Delta Motor Starter with relay range of 66-110A,IP54 protection. Makes: L&T/ Schneider/ ABB/ Siemens/ BCH/ equivalent
Providing, fitting, sizing, laying, testing and commissioning of XLPE insulated 1.1 KV unarmoured Single core 50mm2 insulated copper cable with sleeves for use of internal wiring of various electrical equipment. The Cable shall be fitted to various electrical equipment as internal wiring The cable shall be of preferably Grindlay/Havells/Imperial make & shall be as per relevant IS 7098 Part I with up-to-date amendments. The job also includes crimping of terminal ends with Hydraulic tool & providing & fitting of sockets/thimbles etc. as per required size and amperage. The job also includes the fitting of cable along the walls of the Pump house through flexible conduits by using GI clamps etc as per requirement All consumable as required for the job are included in the scope of the work.
Providing, fitting, sizing laying, testing and commissioning of XLPE insulated 1Core armoured 120 mm2 Aluminium cable to be used as Main Service Line of Grindlays/Havells/Imperial make and shall be as per relevant IS 7098 Part-1 with up-to-dateamendments for connection from HT transformer up to the panel as service line. The job also includes crimping of terminal ends with Hydraulic tool & providing & fitting of aluminium conductor sockets/thimbles etc. as per required size and amperage
Illumination of premises I. High Mast Lighting Pole: Providing and erection of 9 Mtr long hot dip Galvanized Octagonal Pole (Single section) with thickness of 03mm; bottom of 155 mmDia (Across Face), top of 70mmDia (Across Face) with suitable base plate. The Job shall include providing and fitting of Galvanized tubular round frame with holding arms at the top of thestructure suitable for fitting of 04 Nos. of luminaires. Ring diameter shall be of appropriate shape/ size as per the luminaire. Suitable earthing terminals and access door shall be provided at a convenient location near the base of the pole. The Pole shall have inside arrangement for providing of power connections from the terminal connector to the holding arms. (Pole Make: Bajaj/ Wipro/ Philips/ Surya/ Crompton/ Valmont). The job includes the following allied works which need to be carried out II. Foundation Casting M‐15 Cement Concrete Foundation suitable for holding the Octagonal Pole 9 m long upto the required depth including excavation, shuttering etc along anchoring nuts & bolts. III). Luminaire Providing, installation and testing of LED Foodlight Luminariesof 70W - IP65 Rating (Havells/ Bajaj/ Philips/ Crompton) (04 Nos) IV). Cabling Providing, laying and connecting of 2C x 16 SQ-mm armoured Aluminium cable from the connector on Pole to specified lighting source in Pump house. (Havells/Finolex/Polycab make). The job includes providing and underground laying of cable through suitable size conduit approx. (50 meters) along with 2.5mm Sq Copper cable for internal wiring and MCBs etc
Electrification of Pump house: -Providing, fitting and installation of 30-watt LED flood lights IP65at specified locations, including brackets and necessary fixtures required for fitting the flood lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department).
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenol laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for heating point 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with switch socket combine, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Providing & fitting of 1200mm sweep ceiling fan. (Havells/ Orient/ Bajaj) with controller
Providing and fitting LED 9-watt lamps (Havells/ Syska /Wipro/ Philips)
Providing and fitting of service line for electrification of pump house and station premises. The service line shall be 2 Core-16 mm sq. Armoured Aluminium XLPE cable including suitable size & rating of thimbles to be drawn from Electric transformer sub-station/Main panel board to sub-main panel board or as per requirement.
Complete earthing of the electrification of pump house and station premises with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. The job includes providing and laying 6SWG GI wire as earthing conductor.
Providing and fitting of 415V 63 Amp. Capacity 4-pole change over switch along with allied wiring for the lighting system of the pump house. The changeover switch shall be of reputed make (Anchor/ Havells/ L&T/ SSK).
Providing and fitting of 7.5 KVA fully automatic Oil-cooled voltage stabilizer ranging from 90-300 Volts giving output voltage of 200-230 Volts. The job also includes P/F of 12-volt DC battery 180 AH (Exide) along with 950 VA sine wave Inverter (Microtek/ APC/ Sukam make) along with leads terminals and necessary wiring complete in all respects.
Complete earthing of electrical motors, distribution panel, APFC panel, voltage stabilizers, etc. with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
GI strip for Earthing Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nutbolt & spring washer spaced at 50mm)
Providing and laying at site of high Voltage synthetic insulating mats as floor covering around Electro-mechanical gadgets for safe guarding life and limb of workmen due to possible leakage of current and short circuiting. The mats shall have the following characteristics/technical specifications: • Confirming to IS -15652-2006 with latest amendments • Thickness- 2.5mm • Width – 1 Mtr • Length 2 Mtr • Anti- skid Type • Material- PVC Elastomer • Application: suitable for both AC and DC Electric installations. • Class – B • Colour- Black/RED/ Orange/Blue Acceptable make- Safe volt/Dozz/Zenith/ equivalent. The mats besides above shall be moisture proof, fire retardant, no adverse effect of acid, alkalis, diesel oil and T oil and is to be fixed with floor.
Supply of Fire extinguisher ABC powder type of 6 kg capacity with following features 1) IS certified as per IS 15683 of 2006 2) Operating temperature 0 to 55 degrees complete in all respects suitable for dousing fires particularly Electrical fires. 3) Wall hook and discharge pipe shall be supplied along with cylinder
Tool Kit: - The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of Taparia/ equivalent reputed make: • Double ended Spanner of Size (6/7 to 30/32) (01 complete set) • Ring Spanner Set of Size (12/13 to 30/32) (01 complete set) • Cutting Pliers, 8 inch: (01 No.) • Nose Pliers 8 inch: (01 No.) • Insulated Screw Driver 12 inch/ 8 Inch/ 6 Inch/ 4 inch :( 01 No. Each) • Hammer, 01 Kg and 450g: (01 No each) • Heavy duty Pipe Wrench 12 inch&8 inch: (0 No. each) • Bearing puller (sizes 6 & 8): (01 No. each) • Spirit level (600mm): 01 No. • Vernier Calliper (Digital display 0-150mm): 01No. (Freemans/ Mitutoyo/ Insize/ Equivalent reputed) • Aluminium ladder telescopic type 20ft in length
Supply of Single-phase Invertor Technology TIG /ARC welding machine of I BELL make heavy duty portable 250 Amp along with 10 boxes of electrode and complete with all accessories like holder, lead etc
Supply and Providing of Angle grinder of below mentioned specifications Size of disc: 125mm Operating Voltage: 230V Power: 900W (minimum) Speed (No Load): 10000 rpm (minimum) Accessories: Standard The grinder shall be of a reputed make.
Supply and Providing of Hand Drilling machine ( impact drilling Machine)of below mentioned specifications Operating Voltage: 230V Power: 700-750 W Capacity to drill Concrete, Steel and Wood The Hand Drilling machine shall be of Bosch/ equivalent make and shall be provided with carrying case along Drill bits of different sizes.
Providing, Installation, Testing and Commissioning of 11/0.433kV, 3-Phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-1 (As per amendment 4 of IS 1180), (Aluminum wound), and with LV Cable Box having detachable Al. Gland plate with LV Bimetallic terminal connection suitable for vertical take-off of cable. (X-mer without OCTC (Off Ckt Tap Changer)
Providing, installation and testing of 11 kV Gapless Surge Arrestor, 9 kV ,10 kA, LA with Polymer housing and Station Type
Providing, installation and testing of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
Providing, installation and testing of 11 kV Horn Gap Fuse Set 3 Phase 200A
Providing and installation of 120mm² (1Ckt for 100 KVA) Single Core Cable, 1.1KV Grade, XLPE Insulated Stranded Conductor FRLS type (44 Mtr for 1 Ckt)
Providing and Installation of 9 Mtr. Long Pole----- (ST-410 SP33)
Providing and installation of 11kV Polymeric composite Disc Insulator 12kV, min, failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, with creepage distance 320mm
Providing and fitting of GI Channel/Angle/Flat of sizes including clamps
Providing and fitting Galvanized Nuts and Bolts.
Earthing of substation --Excavation of Earth pit of Dia 650 mm & Depth 3000 mm, Installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & Length 2.5 Mtr long as Per IS 1239. GI Strip for neutral Earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & Lightening arrestor as per IS 2629/85, GI nuts &bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover.
Providing and installation of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
Providing and installation of LT Distribution Box for 100 KVA DTR with 160 MCCB 3P 16 kA for incomer & 100 Amp MCCB 3P 16 kA 2 Nos for Outgoing Circuits.
Providing and installation of Galvanized Stay Set with 50x8mm stay clamp, guy insulator(2Nos.) Anchor plate (200x 200 x 6) mm, Nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm Dia GI stranded wire complete
Providing and fitting of Wedge Connectors / PG Clamps
Providing, laying , stringing and binding of Conductor ACSR 0.05 as per IS 398 with latest amendments.
Providing and fitting of Danger Plates with Clamps
Providing and fitting of GI Barbed Wire for Anti Climbing
Providing and fitting of 3-Ø, 4-Wire Trivector Meter with suitable ring type CT
Cement bottoming 1:2:4 mix as per Standards 0.5 Cum/Pole
Painting of Poles Red Oxide
Painting of Poles Aluminum Paint
Sundry items like Aluminum lugs, Jumpers, Binding Tape,
M/s Shaheen Enterprises
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .