Providing n Fixing GI sheet roofing and external painting to the Office of the Assistant Controller Legal Metrology, North Zone, Mapusa Goa.

Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

a) Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins rafters trusses flashings etc. complete as per the directions of the Engineer in charge.

Add for providing & fixing Flashings -[Corners Ridges valleys gable end & Trims] (Girth above 610mm) including all the accessories complete as per the directions of the Engineer in charge.

Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts nuts and flat iron brackets 40 x 3 mm size complete.

250 mm nominal size

Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed.

110 mm dia

Extra for providing and fixing prince or equivalent make PVC SWR running outlet with 2 clamps for socketed half round eaves gutters.

250 mm nominal size

Extra fjor providing and fixing prince or equivalent make PVC SWR 90 deg. Elbow with /without outlet with 2 clamps for socketed half round eaves gutters.

250 mm nominal size

Extra for providing and fixing prince or equivalent make PVC SWR short stop ends for socketed half round eaves gutters.

250 mm nominal size

Extra for providing and fixing prince or equivalent make PVC SWR stop end outlet with one clamp for socketed half round eaves gutters.

250 mm nominal size

Extra for providing and fixing prince or equivalent make PVC SWR rubber seals for socketed half round eaves gutters.

110 mm nominal size

Extra for providing and fixing prince or equivalent make PVC SWR single socket elbow for socketed half round eaves gutters.

110 mm nominal size

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.

110 mm dia

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete without door.

110 mm dia.

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door.

110 mm dia

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete.

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.>With cement mortar 1:4 (1 cement : 4 fine sand)

Laterite masonry in neatly dressed stones for 23cm thick masonary walls in cm.1:4(1 cement :4 coarse sand in foundation upto plinth level) Extra for laterite Masonry in all sizes in superstructure from floor I level upto floor V level

12mm cement plaster 1:4 (1 cement : 4 coarse sand)

Steel work welded (SAIL TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting hoisting fixing in position and applying priming coat of red lead paint.

In tees angles flats and channels

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing in position G.I. hand rail polyster powder coated in external passage as per approved design shown in drawing including bending hand rail pipe to proper shape in curves with special etc. complete.

Salvage of the following items

Mangalore tiles