Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-AOC NO 25 OLD GOVERNMENT SCHOOL OPP STREET KURUMBAPET PUDUCHERRY 605 009 | PONDICHERRY | PUDUCHERRY | 605009 | L1 | Accepted-AOC work order issued |
Tender Value
₹2.8 L
EMD Value
₹5,663
Closing Date
25 Jun 2020, 3:30 pmClosed
The Commissioner, OM
II cross, Jawahar Nagar Puducherry-5
Providing roofing to the Genset and improvements to the cross drainage at Municipal Office at Marie Oulgaret in Oulgaret Municipality
2020_DLA_6272_1
OM/e-tenders/385/2020-21
Open Tender
Civil Works
Works
90 days
Oulgaret
Please refer Tender documents
3 documents required · 3 mandatory
₹525
The Commissioner
₹5,663
26 Oct 2020
15 Jun 2020
25 Jun 2020
15 Jun 2020
25 Jun 2020
15 Jun 2020
Amount
CODE NO. 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.
CODE NO. 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level - 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
CODE NO. 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level-1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20mm nominal size) stone aggragate 20 mm nominal size)
CODE NO.: 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)
CODE NO.5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc., for mass concrete
CODE NO.5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
CODE NO: 6.4.2 Brick work with common burnt clay F.P. (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)
CODE NO.10.16.1 Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting , hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes
CODE NO.10.25.2 Steel work welded in built up sections Framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required – in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works
CODENO.12.1.2 Providing corrugated G.S.sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required - 0.80 mm thick with zinc coating not less than 275 gm /sq.m
CODENO.12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter
CODENO.12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend
CODENO.12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe
CODE NO. 13.1.2 12mm cement plaster of mix -1:6 ( 1 cement: 6 fine sand)
CODE NO. 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
CODE NO. 13.47.1 Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade - New work (two or more coats applied @1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10sqm)
CODE NO. 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
CODE NO: 15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead – nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
CODE NO. 15.3 Demolishing R.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead
CODE NO. 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
CODE NO. 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
CODENO.31.160.1D Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends, tees threaded pieces couplers, reducer, end caps etc.,complete all as per IS and CPWD specification. - 40mm dia.
CODENO.7.6D.MO Steel reinforcement for R.C.C. works including bending, binding and placing in position - Thermo Mechanical Treated Bars (ISI brand approved make) Fe - 415 or more
CODE NO.NPSR Disposal of dismantled material beyond 50mts and upto 2kms lead.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_6411.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .