SPECIAL REPAIR FFL BLDG NO T-620 T-621 OF 3 SIKH AND SPECIAL REPAIR / REPLACEMENT OF WIRING OF MAIN OFFICE BLDG NO T-356 OF 5118 COY ASC (COMP) AT NIMU MIL STN UNDER AGE (I) NIMU

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish of the premises

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over 15mm thick Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 over an including 25mm thick under layer of PCC 1:2:4 to bring the work in proper levelling set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified complete all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick on fair faces of concrete block masonry surfaces in cement mortar (1:4)

Taking down cement or cement lime plaster any description on brick or stone wall surfaces, racking out joints and hacking out for key, scrubing down with water etc,

M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of Synthetic enamel (ordinary tint) complete all as specified and directed by Engr-in-charge

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of Synthetic enamel (ordinary tint) over a coat of Red oxide, zinc chrome primer complete all as specified and directed by Engr-in-charge

Taking down or up steel tubing and connections incl cleaning for refixing or removal to store for 15 mm dia bore.

S&F for 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

Dismantling broken water tank of cap exc 500 ltr but n exc 1000 ltr

S&F for 1000 ltr cap Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor

S&F in repair PVC valveless 10 ltr cap, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repair 15mm fancy type Bib taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repair 15mm dia Angle cock/Stop valves, cast copper alloy,screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repair for 15mm PVC connections of 600mm long with PTMT nuts complete all as specified.

Demolition of stone/boulders masonry, laid dry complete all as specified.

Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for stone masonry Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified.

M&L for stone masonry Walling of random rubble, uncoursed, well bonded, and solidly heartd laid dry as directed and as specified.

Demolition of Reinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition)

Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not ex ceeding 200mm thick with flat rough finished surfaces of concrete, complete all as specifed and directed by Engr-in-charge.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, and columns in floors, roofs complete all as specified and directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate ) in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for Precast reinforced cement concrete, type B-1, 1:2:4 (Using 20mm graded crushed stone aggregate) as in manhole cover set in cement mortar 1:4, compete all as specified and directed.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 75-100mm incl any earth work and demolition of PCC complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floor of 110mm bore pipe complete all as specified and directed by Engr-in-charge

S&F for 110 mm bore PVC (SWR) bends any radius ®

PVC (SWR) Vent cowl of 110mm bore, complete all as specified as directed.

PVC (SWR) floor trap of 75mm plain with grating including jointing with solvent cement

M&L for 100mm thick cement concrete 1:3:6 type C2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;

S&F BALL VALVE 25mm dia

S&F 25mm Nipple suitable for HDPE water tank (Minimum weight 20mm-45 gms

S&F for 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal

S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal

Demolition of cement concrete (Unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for 75mm thick Cement concrete type C- 2,1:3:6 (40mm graded aggregate) as in plinthe protection complete all as specified.

Demolition of precast concrete block walling masonry, built in cement mortar complete all as specified.

M&L for Pre-cast cement concrete block masonry in cement concrete 1:3:6 type C1(using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified.

M&L glazed ceramic tile " coloured" 450mmx 300mm x 7mm as in verticle surface such as skirting /dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and incl 10mm thick bedding layer in cement mortar 1:4 on concrete block wall surface complete all as specified.

M&L for Rendering 10mm thick on fair faces of concrete block masonry surfaces in cement mortar (1:6)

M&L preparing new plastered surfaces of walls and applying two coat of white wash all as specified and directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L repair for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :- (a) One light point/one fan point controlled by one switch

M&L repair for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :- (b) One 3 pin 5 Amp socket outlet on same board.

M&L in repair for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed by Engineer-in-Charge for following :- (b) One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size

All same as per item No 52 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.

S&F repair socket 2 in 1, 5 pin 5 Amp flush type complete all as specified.

S&F repair switch piano flush type 5 Amp, single pole, one way complete all as specified and directed.

M&L in repair for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.

S&F in repair basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.

Supply and fixing LED lights fittings 10/12 watt, 220 v, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F in repair sheet metal powder coated versatile Double door SPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .

M&L in repair for MCB SPN 32 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S&F in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm dia by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 16 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular all as specified and directed by Engineer-in-Charge .

S&f Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed by Engr in Charge .

S&F Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed by Engr in Charge .

Supply and Fixing indoor LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in Charge.

S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 10 watt, 2 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.(Havells Cat Pt No. - LHEXACP7IN1W010 or equivalent in Philips/Crompton)

S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.(Havells Cat Pt No. - LHEXAXPNIN1W020 or equivalent in Philips/Crompton)

S&F sheet metal powder coated versatile Double door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge. .

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as per specified and as directed by Engr-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to MS galvanized earh strip of size 25 x 4 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.

M/S ASGAR ALI TIMBER SHOP (BID ID -3432639)

M/S Behl Sons (BID ID -3433047)

M/S MA CONSTRUCTION Co (BID ID -3433579)

osho traders (BID ID -3433656)