PROVN OF GUARD ROOM AT ESD AND BASEKET BALL COURT AT ABW KANKINARA UNDER GE NORTH KOLKATA

Amount

Surface excvation n. exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete

Excavation in trenches, n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc. and getting out in soft/loose soil

Materials and labour for PCC (1:3:6) using 40mm graded stone aggregate in foundation filling and mass concrete complete.

Material and labour Continuous brick edging with burnt clay bricks of sub class B old size bricks ; with width equal to the depth of the brick, laid on end vertically

Material and labour for Hardcore of gauge of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Material and labour for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using minimum 400 kg of cement per cubic metre, thickness of concrete 10cm complete all as specified and as directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A

Material and Labour for Plastic dividing strips, 1.5mm thick, 22mm width inserted in position, conform to design

Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat, synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

Supply and fix to PVC coated chain link fencing of mesh 50x50mm made out of 10gauge dia mild steel wire overall dia gauge after PVC coating GI binding wire & fixing of MS round bar as line wire for holding chain link mesh complete all as specified and as directed.(MS round bar shall be measured and paid separately) complete all as specified and directed

Material and labour Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 250 sq. cm but n exe 400 sqcm , with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.

Supply and fix flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 5cm but n exc 10cm long and diameter of neck 5 to 10mm complete all as specified and directed.

supply and fix Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Preparation of new concrete surface of any description over 10cm girth or width, not otherwise described and applying two coats of Plastic emulsion paint complete all as specified and directed.

Supply and fix Basketball pole along with waterproof board complete all as manufacturers instruction as specified and directed.

Material and labour Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed

All as per Item No-2 above, but depth exceeding 1.5 m and not exceeding 3.0 m

Returning and filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out in soft/loose soil for laying of GI pipe line including making good to disturbed surfaces complete all as specified and directed.

Excavation in in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out in hard/ dense soil/ PCC/ Road cutting/ hard standing for laying of GI pipe line including making good to disturbed surface with plain cement concrete type (1:3:6) (using 40 mm graded stone aggregate) to match the existing surface after laying of pipe complete all as specified and directed.

Returning, filling in & including spreading, levelling & well ramming in layers not exceeding 25 cm thick as in any type of soil complete all as specified and directed.

Supply and laying GI tubing 40 mm dia medium grade ISI marked laid in trenches/floor/wall/ceiling etc. fixed with overhead tank of any type and capacity with all GI fitting of suitable size such as bends, elbow, socket, tee, reducers, union etc. with and including all new galvanized fittings complete all as specified and directed.

Supply and laying GI tubing 25 mm dia medium grade ISI marked laid in trenches/floor/wall/ceiling etc. with all fitting of suitable size such as bends, elbow, socket, tee, reducers, union etc. with and including all new galvanized fittings complete all as specified and directed.

Supply and fixing gun metal, gate valve 25 mm dia with iron wheel head, screwed both ends for iron pipes including connecting to GI pipe complete all as specified and directed.

Supply and fixing gun metal, gate valve 40 mm dia with iron wheel head, screwed both ends for iron pipes including connecting to GI pipe complete all as specified and directed.

Surface dressing n. exc 15 cm deep and getting out in soft/loose soil complete

M&L RCC M-25 Design mix (using 20mm graded aggregate) in foundation, footings, foundation beams, plinth beams, bases for columns and mass concrete complete.

M&L RCC M-25 Design mix (using 20mm graded aggregate) in Column, pillar, posts and struts complete.

M&L RCC M-25 Design mix (using 20mm graded aggregate) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete.

M&L RCC M-25 Design mix (using 20mm graded aggregate) in Chajja.

M&L RCC M-25 Design mix (using 20mm graded aggregate) in Slab supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete.

Formwork to sides of concrete foundations, footings, bases for columns, raft and raft beams, sides and soffit of fdn and plinth beams and similar, vertical or batter, complete.

Formwork to sides of pillars, posts, struts, columns and stanchions complete.

Formwork to sides and soffit of floor or roof beam, lintels, shleves including supports, etc. complete

Formwork to chajjas, troughs and similar items incl edges

Formwork to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n. exc 200 mm thk (horizontal or sloping) complete

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending lapping etc. as required, complete all as specified and directed.

Materials and labour for water proofing treatment with APP based standard membrane over PCC padding of roof with the following courses of treatment :- (a) Apply bituminous primer @ 0.40 ltrs per sqm of the surface area including cleaning the surfaces complete all as specified (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyster reinforced (4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surfaces preparation before and after application of treatment as per manufacturers instruction complete all as specified and as directed

M&L 40mm thick type B-0 (1:2:4) cement concrete as in damp proof course to horizontal or vertical surfaces incl necessary formwork complete.

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete

Materials and labour for brick work with brick class designation 75 old size brick, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6), complete as specified and as directed.

Materials and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:6), complete as specified and as directed.

Material & labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction, on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified & directed. (Note :- WPC shall be measured and paid separately).

Material and labour for 5mm thick cement plaster in Cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified & directed.

Material and labour for preparation of new plasterd surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

Supply only integral water proofing compound

Material and labour for Sand filling under floors or in foundation incl watering and ramming complete

Material & labour for 100mm thick cement concrete type B2, 1:3:6 (40mm graded agg) as in bases, sub bases, floors complete

Material & labour for 75mm thick cement concrete type B1, 1:2:4 (20mm graded agg) as in floors complete

Material and labour for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Material and labour for Non skid ceramic tiles 7 to 8mm thick (square/rectangular) of size 400x400 mm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick screed bed or bedding layer in CM(1:4) complete all as specified and as directed

Material and labour for glazed ceramic colour tiles (300x200) x7mm thick as in skirting /dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) all as specified and directed.

Material and labour for hard core of broken bricks of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surfaces, complete all as specified and directed..

Material & labour for 75mm thick cement concrete type C2, 1:3:6 (40mm graded agg) as in plinth protection finish even and smooth without using extra cement complete

M&L forming contraction joints (Dummy) joints 65mm deepx10mm wide, filled with sealing compound grade A

M&L for Treating the soil along external perimetre of bldg at the rate of 2.25 Litre of emulsion per sqm of perimetre

M&L treating the top surface of filled earth at the rate of 5 Ltr of emulsion per sqm of surface area complete

M&L treating the backfill in contact with fdn at the rate of 7.5Ltr of emulsion per sqm of vertical surface

Supply and fixing Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Material and Labour for PCC 1:3:6 Type C0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutter as specified in SSR complete all as specified and as directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Anodised aluminium window and ventilator shutters powder coated(Thickness or powder coating not less than 50 micron), sliding type (Two track) without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, roller, locking arrangement, , anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply & fix 5.0 mm thick sheet glass, ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified & directed

Supply & fix galvanised steel wire cloth of 0.63 mm nominal dia of wire and average of width of aperture 1.40mm, fixed with galvanised steel wire staples or wooden beading or aluminium frame work complete all as specified & directed. (Note : Wooden beads/Aluminium frame work shall be provided alongwith shutter)

Material & Labour framed work as in guard bar of window & ventilators conforming to Fe-290 Gde E-165.

Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.

Supply and fix curtain rod mild steel chromium plated , 25mm dia with fixing brackets, stops, rollers etc. as in door and windows curtains etc all as specified and directed

Supply and fix Rotational moulded polyethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fix GI tubing 15mm bore medium grade with all fittings fixed

Supply and fix GI tubing 20mm bore medium grade with all fittings fixed

Supply and fix Stop valve of 15mm PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms)

Supply and fixBall valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

Supply and fix 10 Litre capacity PVC symphonic action type,flushing cistern,low level,white,with inlet,ball valve,float and handle including brackets and flush pipe of polyetylene of low of high density of PVC 32mm dia,for low level cistern including PVC connections 15mm size with brass nuts and washer both side if length 450mm complete all as specified and as directed

Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed

Supply and fix viterous china wash basin white flat back,size 630x400mm including PTMT waste coupling 32mm dia(min wt 45gm),chain and plug and porcelain stopper etc complete all as specified and as directed

Supply ad fix Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, along with PTMT waste coupling (min weight 32mm-45gms); (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Supply and fix Cast iron floor trap, 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

Supply and fix PVC (SWR) floor trap 75mm , plain with grating including jointing with solvent cement

Supply and fix Stop valves 15mm , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Supply and fix Bib taps 15mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fix Pillar taps 15mm fixed , cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F PVC connections 15mm size with PTMT nuts of length 450mm

Supply and fix flexible PVC corrugated waste pipe of size 32mmx1500mm complete all as specified and as directed

Supply and fix health faucet(ABS body with 8mm dia 1meter long flexible tube and wall hook for fixing in 15mm dia pipe complete all as specified and as directed.(Make : Cat No-ALD-BLC-593 of Jaguar)

Supply and fix soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as diercted

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms

Material and labour for cement conrete (1:3:6) 20mm graded aggregate as in floor etc complete all as specified and as directed

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed or bedding layer in CM(1:6)in floors complete all as specified and as directed .

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed .

Excavating over areas, exc 1.5 m deep and n exe 3.0m deep and getting out in soft/loose soil complete all as specified and as directed .

Material and labour for PCC 1:3:6 Type C-1 ( using 20 mm graded stone aggregate ) as in surface channel complete all as specified and as directed .

Material and labour for Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells as required at site complete all as specified and as directed.

Material and labour for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6 complete all as specified and as directed.

Material and labour for rendering 15 mm thk. on fair faces of brick wall or concrete surface (for internal surface of Septic tank / manholes ) in cement mortar 1:3 mixed with intgral water proofing compound as per manufacture instruction and finished even and smooth without using extra cement complete all as specified & directed.

Material and labour for salt glazed stoneware drain pipe 150mm bore grade 'A' laid in trenches and jointed in cement mortar (1:1) and tested in repair complete all as specified and directed.

Material and labour Concrete bed to drain pipes 150mm (1:3:6) type C2 including packing under, and haunching against the sides of pipes after they are laid and tested

Material and Labour for precast RCC ( 1: 2:4 ) Type B-1 ( using 20 mm graded stone aggregate ) as in cover slabs and set in position with cement mortar ( 1:4 ) complete all as specified and as directed .

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Supply and fix PVC (SWR) pipes, single socketed, in any length , with rubber rings 110mm dia complete all as specified and as directed

Supply and fix PVC (SWR) bends 110mm dia in any radius complete all as specified and as directed

Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct / trenches, fixed to pole, wall/roof & making good including cable glands of required size of aluminium thimble for making connection complete of size 10 sqmm 4 core.

All as per item No.114 but of size 6 sq mm, 4 core.

Material and labour for sand cushioning with clean dry sand laid in trenches for cable protection complete all as specified and directed.

Supply and lay sub class 'B' bricks, laid dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and directed

Supply and fix galvanised iron pipe in 40 mm bore, light grade for protection of UG cable laid in trenches / fixed to pole with MS clamp,nut, bolt etc complete with all fitting such as socket or any other item required for fixing of pipe including taking down old unserviceable one complete all as directed. (Note :- MS clamp, nut,bolt etc required for fixing the pipe with pole shall be deemed to be included in the quoted rate). Make: Nezone/ TATA/ Bansal

Supply and fix cable junction box of inside dimension 255 x 355 x 122 with provision of 4 Nos aluminium bus bar of size 25x5mm/ connector for cable of suitable size to be fixed on pole/ wall/ angle with suitable size of clamp, nut bolts and washer, angle etc required at site for fixing of junction box including provision of DIN chaneel for fixing of MCB SPN complete all as specified and as directed. Make - Hensel/ Syntex/ National

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way complete all as specified as directed. Make: C&S / L&T / INDOASIAN

Supply and fix MCB single pole & neutral 6 to 32 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed Make : C&S/ L&T/ Indoasian

Supply and fix MCB TPN 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make - C&S/L&T/ Indoasian

Matetial and labour for sub-main wiring in repairs with two run of FR LS PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 2.5 sqmm cable one run of 2.5 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate).

Supply and Errection steel tubular swaged welded poles 9.0 metr long conforming to IS-2317/1980 type 410 SP-31 complete with cast iron base plate final taper plug, bolts, nuts and screws etc including two coats of aluminium paint over a coat of red oxide primer, zebra painting upto 1.5 mtr height in yellow and black colour strips in alternate layers of 150mm width complete including taking out damaged steel tubular pole and PCC work all as specified and directed. (NOTE : Earth work and PCC work for base and coping shall be measured and paid separately) Make: NTC/ Calcutta pole/ Subham

Material and labour for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in foundation , filling and mass concrete for pole , etc complete all as specified and directed

Material and labour for PCC (1:3:6) type C-1, (using 20 mm graded stone aggregate) as in coping of poles, repair of platform for Panels / Feeder Pillar Boxes, foundations etc including necessary form work complete all as specified and directed.

Supply and fix LED flood light 100 Watt die cast aluminium housing with IP-65 protection and surface mounting device type LED 100 Watt with lens 10000 lumens output including all fixing arrangement required to fixed on pole/ wall / surface with suitable size of fixing items such as clamps, nut bolts and washer of suitable size connecting with existing electric supply with three run of 1.5 sqmm single core copper conductor cable with flexible PVC conduit complete all as specified and directed. Make - Century LED Ltd Cat part No. - FWZP100C / Bajaj cat part No. - BJFL 100W LED / Wipro Cat part No. - LF20-122-060-57-XX

Supply and fix in replacement of MCCB 4 Pole, 100 Amps,AC, 415Volt , rapturing capacity 16 KA with adjustable thermal setting and adjustable magnatic setting suitable as per site complete all as specified and directed. Make : C&S/ L&T/ Indo Asian suitable for existing LT Feeder pillar box

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4.0 mm dia of by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe(light grade), alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 5 of SSR part-1 and testing on completion complete all as specified and directed..

S& F GI wire 4 mm dia

S&F GI pipe 15 mm dia light grade

Material and labour for concealed point wiring (concealed type) with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors (FRLS ) 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit not less than 20mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of GI boxes and hylum sheet of suitable size for fixing of switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth switch board cover with brass screws and washers including making good the surface complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate.) :- (a) One light point controlled by one switch complete all as specified and directed.

(b) One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

(c) One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

(d) One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm FRLS for phase & neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit not less than 20mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of GI boxes and hylum sheet of suitable size for fixing of 16 Amp switch and socket, etc and earth continuty conductor shall be connected to common earth switch board cover with brass screws and washers including making good the surface complete all as specified and directed. . Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt all as specified and directed

Supply and fix celling rose surface type ,3 terminal of min dia 63.5mm and ISI marked all as specified and directed

Supply and fix socket out let 3/5 pin 5 Amp flush type 240 volt.all as specified and directed

Supply and fix switch socket combination 3/5 pin 5 Amp flush type 240 volt.all as specified and directed

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed

Supply and fix celling fan regulator(step type regulator) AC 230 volt suitable for ceilling fan any sweep all as specified and directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for batten fittings complete all as specified as directed

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way complete all as specified as directed. Make: C&S/ INDOASIAN/ L&T

Supply and fix MCB single pole & neutral 32 Amps, 240 volts, 'C' series 10 kA with all incoming / outgoing connections with proper size of lugs complete all as specified as directed Make: C&S/ INDOASIAN / L&T

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. Make - C&S / L&T/ Indoasian

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20/18 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting complete all as specified and as directed. Make of T/L fitting - Century LED Ltd Cat Part No. - KCCF0200 / Philips Cat Part No. - TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No. - WIO921208 Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LEDtube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE

Supply and fix LED bulk head light fitting 12/10 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make: Centrury LED Ltd Cat part No - HWAR012C/ Bajaj Cat Part No. - BIBWP 10W LED / Philips Cat Part No. - WT202W LED6S NW PSU S2 PC.

Supply and fix LED STREET light 45 Watt die cast aluminium housing with IP-66 protection and surface mounting device LED 45 Watt with lens lumen output 4500 lumen with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Bajaj Cat part No. - BRTFG 45W LED I / Wipro Cat part No. - LR02-501-XXX-57-XX

Supply , fixing , testing and commissioning of Ceiling Fan 1200mm sweep copper winding 5 star durable with high quality double ball bearing white/ ivory colour with all accesories complete suitable for single phase 230 Volts AC supply with necessary electrical connection and fixing arrangement complete all as specified as directed. Make : Crompton/ Anchor/ Havells

Supply and fixing LED batten mirror light 10 Watt with extruded aluminium body, PC diffuser and inbuilt driver prewired suitable for fixed on wall/ ceiling fixtures with electronic driver and diffuser including with all accessories and two Nos 2nd class hard wood round block including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. Make: Century LED Ltd Cat Part No. - BWMP010C or equivent model of Philips / Wipro.

Cutting hard standing / road for laying of cable / protection pipe complete all as specified and directed.

Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct/ trenches/ fixed to pole/ wall/ roof, connected to existing LT panel with connecting items such as cable glands and aluminium thimble of suitable size and any other items required for making connection in DB and connecing with existing bus bar/ MCCB of LT panel complete and making good to distrubed surface complete of size 10 sqmm 2 core complete all as specified and as directed. Make: Haveles/ KEZ/ Polycab

REMCO

Mother Lumier Industries

N. C. DUTTA

A ESS and CO

TAMALIKA ENTERPRISE

M/S Manna Construction