8362 PROVN OF VEIW CUTTER AT BLDG NO 01 ELLIOT LINES AND PROVN OF VIEW CUTTER ALONG THE EXISTING CHAIN LINK FENCING FOR THE BOUNDARY WALL OF HQ EW BDE ALONGWITH THE A1 DEFENCE LAND AT ADJOINING TO THE PERIMETER WALL UNDER GE (CENTRAL) PUNE

Amount

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion in cement concrete and making good distrubed ground complete.

Dismantling fencing wire mesh any type complete

Excavating in post holes in softl loose soil (or similar holes) each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and watering complete.

Excavating in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr depth for foundation etc or shafts, wells, cesspits, manholes, pierholes etc and not exc 10 Sqm on plan and not exc 1.5 Mtr in depth and getting out in hard/ dense soil complete.

M & L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) as in foundation, filling and mass concrete complete.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in fencing kerbs/ coping etc for chamfered angles and throating including use and waste of necessary formwork all as directed complete.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing barebed wire etc) including all necessary drilling, bolting or riventing, embedding in cement concrete, MS flat at bottom etc and similar work confirming to Fe-290 Gde E-165 complete.

M&L for precast cement concrete block masonary exceeding 10 cm in width with solid blocks of PCC (1:5:8) grade D-5 and set in CM 1:6 complete.

M&L for 15mm thick rendering in CM 1:4 on fair faces of external wall surfaces with sponge finished complete.

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer of same make complete all as specified and directed.

Removing excavated soil not exc 50 mtr and depositing where as directed at a level not exc 1.5 Mtr above the strarting point complete.

J P ASSOCIATES

Sai Construction

ANIL CONSTRUCTION CO.