Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.0 CrAdmitted-Finance | ₹8.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹9.8 Cr+₹1.8 Cr (23.0%)Admitted-Finance 1ST FLOOR HAMILTON HOUSE J N HEREDIA MARG BALLARD ESTATE MUMBAI MAHARASHTRA 400038 | 400038 | ₹9.8 Cr+₹1.8 Cr (23.0%) | L2 | Admitted-Finance |
| 3 | L3₹10.0 Cr+₹2.0 Cr (25.3%)Admitted-Finance 21 SWASTIK CHAMBERS GROUND FLOOR CHEMBUR MUMBAI MAHARASHTRA 400071 | MUMBAI SUBURBAN | MAHARASHTRA | 400071 | ₹10.0 Cr+₹2.0 Cr (25.3%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | HINDUSTAN CONSTRUCTION CORPORATION L3 | TEMA INDIA LTD. L2 | DIPESH ENGINEERING WORKS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Collection of FIM, handling, transportation, storage, pickling & passivation, physical measurement, checking interferences, fitup, installation & alignment on supports of SS304L pipelines, inline equipment & fittings at various elevations. This also includes preparation of fabrication drawings, supply of consumables, instruments, scaffoldings, setting up of fabrication shop, dimensional measurement, providing as built drawings, documentation, FIM accounting etc. as per technical specifications, drawings and as directed by EIC. Size of pipes involved are from 8NB to 300NB.
Pipes ≤1" shall be considered as 1". | 23,600 | inch-m | 400 ₹94,40,000 | 236 ₹55,69,600 Lowest | 324 ₹76,46,400 |
| 2.00 | Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including LP examination on root and final pass of joints along with supply of all consumables and filler wires as per technical specifications.
Pipe size ranging from 8NB to 25NB
Pipes ≤1" shall be considered as 1" dia. | 7,000 | inch-dia | 1,500 ₹1,05,00,000 | 867 ₹60,69,000 Lowest | 1,080 ₹75,60,000 |
| 3.00 | Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including LP examination on root and final pass of joints along with supply of all consumables and filler wires as per technical specifications.
Pipe size ranging from 40NB and above. | 14,200 | inch-dia | 1,500 ₹2,13,00,000 | 867 ₹1,23,11,400 Lowest | 990 ₹1,40,58,000 |
| 4.00 | Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations. Arrangement of Radiography equipment, tools, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. The contractor shall provide Radiographs in digital as well as hard copy format along with other inspection reports.
Pipe size ranging from 8NB to 50NB. | 12,600 | Number of joints | 1,160 ₹1,46,16,000 | 1,003 ₹1,26,37,800 Lowest | 1,500 ₹1,89,00,000 |
| 5.00 | Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations. Arrangement of Radiography equipment, tools, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. The contractor shall provide Radiographs in digital as well as hard copy format along with other inspection reports.
Pipe size ranging from more than 50NB. | 5,300 | Number of exposures | 1,100 ₹58,30,000 | 649 ₹34,39,700 Lowest | 750 ₹39,75,000 |
| 6.00 | Fillet/Flange welding of SS304L material by GTAW process using ER 308L filler wires with argon purging/shielding including LP examination on root and final passes along with supply of all consumables and filler wires as per technical specifications.
Pipes ≤1" shall be considered as 1" dia. | 3,500 | inch-dia | 1,100 ₹38,50,000 | 590 ₹20,65,000 | 540 ₹18,90,000 Lowest |
| 7.00 | Cold bending of SS 304L Pipes up to 40NB including cleaning, LP examination and dimensional measurement as per technical specifications. Bending machine, dies and other consumables as required are in the scope of contractor.
Pipe size ranging from 8NB to 40NB
Pipes ≤1" shall be considered as 1" bend. | 5,800 | inch-bend | 354 ₹20,53,200 | 283 ₹16,41,400 Lowest | 300 ₹17,40,000 |
| 8.00 | Supply, fabrication and installation of SS-304L identification tags of size 100mm (Length) x 25mm (Width) x 1mm (Thick). Line number/ fitting designation given by the department engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at suitable locations as per technical specification and instruction given by the EIC. | 3,000 | Nos. | 150 ₹4,50,000 | 295 ₹8,85,000 | 108 ₹3,24,000 Lowest |
| 9.00 | Supply, fabrication, inspection and erection of supports and clamps made of SS304 material having sections angle, channels, box sections, plates and welding these supports to Eps as per site requirements, technical specification and approved drawings. | 12,000 | Kg | 708 ₹84,96,000 | 266 ₹31,92,000 Lowest | 540 ₹64,80,000 |
| 10.00 | Supply and Fixing of Zinc plated Carbon Steel Anchor fastener of size M16x145mm long by drilling through SS lining in concrete as per requirement for fixing plate Eps or other structures, Fabrication and erection of SS caps for sealing of anchor fasteners as per Tender specifications, drawings and as directed by the EIC. | 400 | Nos. | 944 ₹3,77,600 | 708 ₹2,83,200 Lowest | 1,200 ₹4,80,000 |
Tender Value
₹8.8 Cr
EMD Value
₹17.5 L
Closing Date
23 Nov 2023, 3:00 pmClosed
Dy. Chief Executive
INRPC, NRB, BARC, Tarapur - 401502
Piping and Equipment Installation in Dissolver Cell of RP Blocks at NRB, BARC, Tarapur.
2023_NRB_776853_1
BARC(T)/NRB/INRPC/MPT519/2023
Open Tender
Machineries/ Mechanical Engg Items
Works
730 days
BARC Tarapur
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹17.5 L
BARC Tarapur
5 Apr 2024
19 Oct 2023
28 Nov 2023
19 Oct 2023
23 Nov 2023
19 Oct 2023
19 Oct 2023 - 29 Oct 2023
30 Oct 2023
Amount
Collection of FIM, handling, transportation, storage, pickling & passivation, physical measurement, checking interferences, fitup, installation & alignment on supports of SS304L pipelines, inline equipment & fittings at various elevations. This also includes preparation of fabrication drawings, supply of consumables, instruments, scaffoldings, setting up of fabrication shop, dimensional measurement, providing as built drawings, documentation, FIM accounting etc. as per technical specifications, drawings and as directed by EIC. Size of pipes involved are from 8NB to 300NB. Pipes ≤1" shall be considered as 1".
Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including LP examination on root and final pass of joints along with supply of all consumables and filler wires as per technical specifications. Pipe size ranging from 8NB to 25NB Pipes ≤1" shall be considered as 1" dia.
Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including LP examination on root and final pass of joints along with supply of all consumables and filler wires as per technical specifications. Pipe size ranging from 40NB and above.
Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations. Arrangement of Radiography equipment, tools, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. The contractor shall provide Radiographs in digital as well as hard copy format along with other inspection reports. Pipe size ranging from 8NB to 50NB.
Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations. Arrangement of Radiography equipment, tools, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. The contractor shall provide Radiographs in digital as well as hard copy format along with other inspection reports. Pipe size ranging from more than 50NB.
Fillet/Flange welding of SS304L material by GTAW process using ER 308L filler wires with argon purging/shielding including LP examination on root and final passes along with supply of all consumables and filler wires as per technical specifications. Pipes ≤1" shall be considered as 1" dia.
Cold bending of SS 304L Pipes up to 40NB including cleaning, LP examination and dimensional measurement as per technical specifications. Bending machine, dies and other consumables as required are in the scope of contractor. Pipe size ranging from 8NB to 40NB Pipes ≤1" shall be considered as 1" bend.
Supply, fabrication and installation of SS-304L identification tags of size 100mm (Length) x 25mm (Width) x 1mm (Thick). Line number/ fitting designation given by the department engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at suitable locations as per technical specification and instruction given by the EIC.
Supply, fabrication, inspection and erection of supports and clamps made of SS304 material having sections angle, channels, box sections, plates and welding these supports to Eps as per site requirements, technical specification and approved drawings.
Supply and Fixing of Zinc plated Carbon Steel Anchor fastener of size M16x145mm long by drilling through SS lining in concrete as per requirement for fixing plate Eps or other structures, Fabrication and erection of SS caps for sealing of anchor fasteners as per Tender specifications, drawings and as directed by the EIC.
Supply and Fixing of Zinc plated Carbon Steel Anchor fastener of size M20x200mm long by drilling through SS lining in concrete as per requirement for fixing plate Eps or other structures, Fabrication and erection of SS caps for sealing of anchor fasteners as per Tender specifications, drawings and as directed by the EIC.
Fabrication and installation of Pipe support SS 304L plate EPs. The work includes collection of FIM, handling, transportation, storage, pickling passivation, fabrication and installation of Eps using Anchor fastener. Fabrication involves cutting of SS plates and drilling holes for anchor fasteners. Approximate quantity and sizes of EPs are as below: 200mm x 200mm x 12mm : 140 Nos. 500mm x 500mm x 20mm : 15 Nos.
Hydrostatic testing of Pipe Embedments, including cutting of blinds, Preparation of ends for hydrostatic test, testing and normalization for further work, supply and installation of PVC end caps after completion of activity as per technical specification and instruction of EIC. It also includes providing testing setup and other consumables as required. Size of pipes involved are from 8NB to 150NB.
Collection from departmental stores within 12 km distance, Handling, Transportation, Pickling & Passivation, and Erection on floor EPs of SS Tanks. It includes physical measurement, alignment, levelling, erection and welding of base plate to EPs as per Nozzle Orientation drawings, equipment layouts, technical Specification and as per directions of EIC. Total Number of Tanks:36 Nos Approx weight of Heaviest Tank:4200Kg Approx. Size of Biggest Tank:1.0M DIA. X 5.1M Length
Fabrication, welding, inspection, Installation and testing of connector piece (8 Nos.) between dissolver and Chute using 10mm thick SS304L plate as per site measurement. The work includes preparation of fabrication drawings, collection of FIM, handling, transportation, pickling & passivation, fabrication, LPT of root and final passes of weld and RT of longitudinal seam weld as per approved drawings and tender specifications. Approx. OD at ends are 370 mm and 410 mm and length is about 1000 mm.
Sealing of SS pipe Eps with SS liner using GTAW welding and Argon purging/shielding. It includes fabrication of padding plates from FIM of SS 304L plate of 3 mm thickness, fillet welding of padding plate to liner and padding plate to embedded pipe. All weld joints will be subjected to LP examination as per approved procedure. Supply of all consumables and filler wires as per technical specifications are in the scope of contractor. Pipe EPs size range from 8 NB to 80 NB
Procurement, Inspection, Testing and Supply of "SS-304L REDUCERS (Conc.) (ASTM A 403 TP 304L, BW, SMLS)" of size 15 x 8 NB (Sch 40) to site as per drawings and Tender Specification. Each heat/lot of reducers to be Solution annealed and IGC tested to 12 MPY. Pipe Class SA1
Procurement, Inspection, Testing and Supply of "SS-304L ELBOWS (90 deg) (Long Radius) (ASTM A 403 TP 304L, BW, SMLS)" of size 50 NB Sch 40 to site as per drawings and Tender specification. Each heat/lot of the elbows to be Solution annealed and IGC tested to 12 MPY. Pipe Class SA1
Procurement, Inspection, Testing and Supply of "SS-304L ELBOWS (90 deg) (Long Radius) (ASTM A 403 TP 304L, BW, SMLS)" of size 150 NB Sch 40 to site as per drawings and Tender specification. Each heat/lot of the elbows to be Solution annealed and IGC tested to 12 MPY. Pipe Class SA1
Procurement, Inspection, Testing, Supply and Delivery of SS 304L seamless pipe of size 80 NB Sch 40 conforming to ASTM A312 TP 304L to BARC TARAPUR as per technical specifications.
Procurement, Inspection, Testing, Supply and Delivery of SS 304L seamless pipe of size 150 NB Sch 40 conforming to ASTM A312 TP 304L to BARC TARAPUR as per technical specifications.
TEMA INDIA LTD.
HINDUSTAN CONSTRUCTION CORPORATION
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 3.21 MB
Technical_Bid_MPT_519.xls
Additional Documents • 0.19 MB
Tender_Docs_MPT_519.pdf
Tender Documents • 9.96 MB
BOQ_816625.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .