Entrance Gate at SIDAC Gandamunda Bhubaneswar

Amount

A. ENTRANCE GATE

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C ( 1:4:8) with 20 mm size metal including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Column Footing (M20)

Column (M20)

Plinth Beam (M20)

Top Beam (M20)

Slope Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC.

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as direction of EIC.

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade( Texture colour) over a coat of primer with water bond cement primer applying putty punning with Synthetic Acrylic wall putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Providing and fixing 10-12 mm thick Teracotta Slope (Nuria ) Tile with teracotta birds/monkey etc for Slope roof, wall and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge.

Providing and fixing 200x100 mm thick Khandlite stoneTile claddind with laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) with joints treated with red oxide mixed with matching pigment, including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing of M.S. fabrication work including weilding & molding screws with heavey wheel as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Supplying, fitting and fixing of SS letter with bacl light & beam below surface light with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Provision for Stone statue with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Provision for Eletrification work with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Providing Painting 2 coats with synthetic enmal paint over a coat of primer. complete as per direction of Engineer-in-charge.

PRAYASH RANJAN MOHAPATRA (BID ID -3289662)