PROVISION OF CHAIN LINK SECURITY FENCE OF 283 FD REGT TRAINING CUM BRIEFING HALL NEAR BUILDING NO AC08 AT SRC LINE OF 194 MED REGT AND TILING IN KITCHEN BATHROOM AND TOILET IN JCO OR MD ACCN BUILDING NO 227 7 TO 12 SRC LINE OF 9 ARTY BDE 01 X BATHROO

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

Excavation in post holes (or similar holes) n.exc 0.50 cum, each in soft/ loose soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M& L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) as in bed blocks to fencing post complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; flat fair finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to chullah hoods, chajjas, troughs and similar items in cluding edges, rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork flat fiar finished surfaces to edges of concrete flats, breaks in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 174 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 178 of SSR Part-II complete all as specified and directed.

S&F anodised aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium grill for doors, windows, ventilators with one or more rebates with and including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, ruber neopene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be masured and paid separately.

Supplied and fixed aluminium window and ventilator with side hung shutters with sash bars section weight 0.55 kg/RM including aluminium standard grills, necessary jointing cleat glazing,clip,handles CP hinges, tower bolts etc packing,anodised snap beading,screws complete all as specified and directed.

S&F for 4 mm thick black tinted glass panes fixed to aluminium doors/ windows / vents with necessary rubber gaskets complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S &F stainless steel butt hinges of 50 mm size, of stainless steel complete all as specified and directed.

S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F stainless steel fancy type curtain rod 25mm dia, complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. Make : Jaquar Cat Part No ACN1101N

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F mortice lock of brass 4 Levers, vertical type size 75mm complete all as specified and directed

Roughening of existing pcc flooring on vertical surface by means of light hammering / cheaseling etc to receive screed bed / backing coat for placing tiles complete all as specified and directed

M&L for rounding to edges of stone slabs two edge full round, such as in steps, cooking platform and other similar situation complete all as specified and directed

S&F aluminiun (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed. complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 5-10 mm dia of neck and exc 5cm but n.exc 10cm long, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 42 here-in-before but 6mm to 8mm dia

All as per Srl item No 42 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

Supply & fixed mild steel TMT round bars of 10mm dia as in line wire, cut to lengths, hooking ends etc conforming to Fe 490 (Gde-165) quality 'A' for tying chain link fencing complete all as specified and directed

Supply only chain link MS galvanised fencing, heavy zinc coated (Hot Dip) of 4mm nominal dia of wire and mesh of size 75mm x 75mm conforming to IS: 2721-2003 complete all as specified in clause 10.34 on page 214 & 215 of MES SSR - 2009, Part-I and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wire to be measured

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

M&L for preparing ,cleaning new concrete/plastered surface providing 10mm thick bedding layer of cement mortar 1:3 mixed with water proofing compound and applying evenly a tack coat @1.20 kg/Sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/Sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per Sqm and finish the surface with aluminium paint at top @ 0.2 kg/Sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/Sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (minimum), (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the clour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed".

All as per item No 54 here-in-before but on vertical surfaces over & including backing coat of 10mm thick in CM 1:4 complete all as specified and and directed

M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and and directed

M&L for 20 mm thick machine cut Granite stone slab PERFECT BLACK table rubbed polished and round edges as in cooking plateform, steps and window cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigmen to match with shade of graniteomplete all as specified and directed.

M&L for laying 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 3% complete all as specified and directed. Note:- water proofing compound will be measured and paid seperately.

M&L for rendering 10 mm thick in cement mortar 1:4 on ceiling of brick or concrete surface, finished even & smooth W/O using extra cement all as specified and directed.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces over and including primer & 3mm thick JK Birla wall care putty complete all as specified and direcrted.

M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over and including primer & 3mm thick JK Birla wall care putty complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n exc 10 cm width or girth when un connected with other painting in a different tint and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms Make - 'Prayag' / Polytuff complete all as specified and directed.

Supplied and fixed CP over head shower 100mm dia round shape single flow (ABS Body chrome plated with Gray face plate) with rubit cleanig system. Make : Jaquar Essco (Cat No : EOS - 542 N) complete all as specified and directed

S&F bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F C P bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixed stop valves, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed down both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F angular valve, 15mm bore dia, cast copper alloy, CP with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F CP wall mixer single lever concealed diverter for bath and shower system complete all as specified and directed. Make :- Jaquar Cat No 5281

Supplied and fixed CP towel ring 150mm dia conforming to the sample kept in the office of Engr-in-Charge complete all as specified and directed.

Supplied and fixed CP soap dish brass CP complete all as specified and directed. Make Jaquar Cat Part No ACN1131N

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed Stainless steel grating doom 100 mm dia and waste hole (minimum weight 40 gms) complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint Fixed to wall complete all as specified and directed.

Supplied and fixed 110mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) 110 mm bore junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed UPVC (SWR) floor trap 75 mm bore including jointing to waste pipe with cement solvent fixed in cement concrete complete all as specified and directed

Supplied and fixed vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc including Plastic water closet seat cover of any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusiveof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

M&L urinal partition marble makrana white of size 310x700 mm complete all as specified and directed

Supply and fixing PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

M&L for construction of Soakage well, excavated in ordinary soil foundation PCC 1:3:6 walls of honey combed and solid brick in CM RCC cover slab in M-25, filling work with brick bats complete of size 3.00 m dia x 4.5m deep as directed by directed by Engr-in-Charge. Ref TD HQ CEBZ drg No TD/309 sheet No 1/4, 2/4, 3/4 & 4/4

S&F 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed

S&F CP toilet paper holder conforming to the sample kept in the office of Engineer-in-Charge complete all as specified and directed

S&F chromium plated glass shelf of size 22" complete all as specified and directed. Make - Jaquar Cat Part No 1173

M&L Construction of septic tank for 25 users with sludge chamber including necessary earth work, brick work in CM 1:4 and precast RCC cover slab in M-25 Design mix having 6mm thick MS plate embedded all around reinforced cover complete all as specified and shown on drg No TD-217 sheet 1/7 to 7/7 and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover,including suitable modular box,base plate and outer plate all as directed for one light/Fan/Bell point controlled by one,one way modular switch 06 Amps, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers ,one way modular switch 06 Amps.complete all as specified and directed for the following:- (a) One light/fan/exhaust fan/bell/buzzer point controlled by one, one way modular switches 5/6 Amps.

(b) One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way modular 5/6 Amp switch.

(c) One 3 pin 5/6 Amps socket outlet point on same board, controlled by one, one way modular 5/6 Amp switch.

M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor,FR, cable in and in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 2.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a) One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way modular 16 amp switch.

All as per Srl item No 111 here-in-before but using 4 sqmm copper conductor for with 4 sqmm earth wire for one 20 amps socket outlet on independent board complete all as specified and directed

S&F Modular Switch, 1 Module, 6A, AC, 240V, one way ISI Marked and as specified. complete all as specified and directed

S&F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way ISI Marked and as specified. complete all as specified and directed

S&F Modular Switch, 1 Module, 16A, AC, 240V, one way ISI Marked and as specified. complete all as specified and directed

S&F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way ISI Marked and as specified. complete all as specified and directed

S&F Modular white cover plate with frame 1 module and as specified. complete all as specified and directed

S&F Modular white cover plate with frame 2 module and as specified. complete all as specified and directed

S&F Modular white cover plate with frame 3 module and as specified. complete all as specified and directed

S&F Modular white cover plate with frame 4 module and as specified. complete all as specified and directed

S&F Modular white cover plate with frame 6 module and as specified. complete all as specified and directed

S&F Modular white cover plate with frame 8 module and as specified. complete all as specified and directed

S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed.

Supply & fixing LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

Supply & fix LED tube light fitting T/5 surface mounting poly carbonate batten 240 volts 10 watts, 6500K complete all as specified & directed.

M&L for security light fitting 1 x35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

Supply & fix LED lamp 9 W 6500k, 240V complete all as specified and directed

S&F Fresh Air fan AC single phase 230/240V size 300 mm sweep with louvers, non metallic body . Make : Usha/Orient/Crompton Greaves. complete all as specified and directed

Supply and fix flush type Electronic Regulator socket size AC , 240V. complete all as specified and directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and directed

All as per srl item No 131 here-in-before but TPN DB, Vertical mounting, 415 V, 4 way with 200 Amps rated busbar, double door.

Supply and fix Isolator 4P, 63A, AC, 415V, ISI Marked complete all as specified and directed

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA. complete all as specified and directed

Supply and fix MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Supply, laying & testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall/ pole of cross sectional area of cable 35 Sqmm, 3.5 core complete all as specifeid and as directed.

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed

M & L for fly ash brick protection length of brick shall be laid across the length of cable) complete all as specified and directed

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose. complete all as specified and directed

S & F Ceiling fans 1200 mm sweep,AC , 230V all as specified and directed. complete all as specified and directed Make: Orient/ Usha/ CG

Supply, Install, Test & Commissioning, Water Resistant / Splash Proof (IPX-4), Whirlflow technology, Electric water heater (Geyser) 25 Ltrs capacity, 2 KW rated power, AC, 230V, Vertical type, 5 Star Rated, ISI Marked, Energy Efficient, having Feroglass coated / Anode Rod protected inner container / Tank, Incoloy Glass Coated Heating Element, High Density PUF insulated, Multi Function Safety Valve, Fire Retardant ISI Marked Heavy duty 3 core cable with shock Resistant Plug Top, temperature sensitive LED indicators, adjustable temperature setting, 0.8MPa high working Pressure, Complete with suitable size Anchoring / Grounting / Fastening type Bolts with Nuts & Washers, necessary grounting in PCC incl earthing testing for the Geyser, Colour : White, Make : Venus/ Havells / Racold

Material and labour for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and including taking down old unserviceable sub main complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, for pit cover including testing on completion complete all as directed.

Supply & Install Heavy duty prepainted (Silver colour) zinc coated plain galvanised sheet of gauge 18 of Desert cooler having nominal air flow capacity of 4000 cum per hour, Electric driven, 1 phase, 240 V, AC heavy long body Exhaust Fan motor with aerodynamically controlled blade, high pressure ISI marked submersible water pump, ISI marked 3 core 1.5 sqmm PVC sheathed cable of minium 2 mtr long with plug top, ISI Marked control switches etc. Complete with all connected accessories. Make : Summer King / Summer cool / Crompton. complete all as specified and directed

S&F in repairs switch piano flush type, 5A, AC, 240V, one way ISI Marked complete all as specified and directed

S&F in repairs socket outlet flush type, 5A, 5pin, AC, 240V ISI Marked complete all as specified and directed

Supply & fix Gun-metal, ball or gate valve, with iron handle, screwed of size 15 mm bore. complete all as specified and directed

Supply & fix Gun-metal, ball or gate valve, with iron handle, screwed of size 25 mm bore. complete all as specified and directed

Pvc connection PTMT pipe cold water pipe 16 mm for desert cooler complete all as specified and directed

M&L for structural steel work,made out of Fe 410 W (Gde-E-250) for desert cooler. complete all as specified and directed

S&F in repair MCB SP 6 to 32 A, AC, 240V, 10KA ISI Marked complete all as specified and directed

S&F in repair Isolator DP, 32A / 40A, AC, 240V, ISI Marked complete all as specified and directed

Submain 6 sqmm complete all as specified and directed

MCB DB 4 way complete all as specified and directed

S & F Switch piano flush button single pole one way 15 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed.

M&L for making opening in the wall for fixing exhaust fan up to 200 mm, including plastering work & making good the surfaces all as directed.

Supply and fix Wall fan 450 mm sweep, AC Complete all as directed.

Supply and fix MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Manglam Engineers and Construction Co

M/S AMAR ELEKTRO CENTRE

Agastya Constructions

VIRAT CONSTRUCTIONS

M/S ABHI ASSOCIATES