Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.8 LAccepted-AOC BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹31.4 L+₹79,746.17 (2.61%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than lowest bid | |
| 3 | L3₹33.4 L+₹2.8 L (9.20%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid | |
| 4 | L4₹35.2 L+₹4.6 L (15.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bid |
Tender Value
₹34.4 L
EMD Value
₹68,780
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West)
Kabir Road Jalandhar Cantt
COMPREHENSIVE MAINT TO OTM AND MD ACCN OF AREA A-1 UNDER (WEST) JALANDHAR CANTT
2023_MES_575394_1
GE/JAL(W)-74/2022-23
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹68,780
Yes
24 Feb 2023
17 Jan 2023
16 Feb 2023
17 Jan 2023
13 Feb 2023
31 Jan 2023
Amount
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles incl removing mortor and cleaning serveciable bricks
M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks
Taking down cement or cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth w/o using extra cement all as specified and directed.
M&L for preparing new plastered or unplastered wall surfaces and applied two coats of cement base paint over one priming coat complete all as specified and directed by Engr-in-charge.
M&L 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge.
M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer coat of wall care putty complete all as specified and directed by Engr-in-charge.
S&F 35 mm thick precast cement concrete (1:2:4) type B-0 ( using 12.5) mm graded stone aggregate) as in louvers or jallies set in cement mortar (1:4) including all necessary from work and reinforcement & dismantling the existing jalli of any description complete all as specified and directed by Engr-in-Charge
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by the Engr-in-Charge.
M&L for non skid ceramic, coloured, joint free, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.
M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:4 complete all as specified and as directed by Engr-in-Charge.
S&F glazed ceramic tiles 350mmx250mm/300mmx200mm, 7mm thick as in vertical surfaces viz dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in skirtings etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.
M&L for vitrified ceramic, Light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exceeding 1.00 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exceeding 1.00 Sqm; as in skirtings etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.
M&L for machine cut kota stone slabs (22" x 22") flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, over & including 15mm thick cement screed bed in cement mortar 1:6 including rubbing and polishing to achieve mirror finish complete all as specified and directed by Engr-in-Charge.
M&L for machine cut kota stone slabs (22" x 22") flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, over & including 10mm thick cement rendering in cement mortar 1:4 as in riser of steps, skirting, dado and pillar laid over cement including rubbing and polishing to achieve mirror finish complete all as specified.
Dismantling of AC corrugated/semi corrugated) sheets as in roof covering all as specified and directed by Engr-in-Charge.
Material & Labour for 6 mm thick AC sheet corrugated or semi corrugated sheets in roofs fixed with `L' hook or `J' bolt all as specified and directed.
S & F for 4 mm thick of size 600x600mm HPSC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including taking down the old ceiling complete all as specified and as directed.
Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engr-in-Charge.
S&F steel window 1.25mm thick box type ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW, sec 50mmx20mm and 1mm thick with two operable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame/shutter:- (a) Hold fast,150mm long of 12mmx3mm made to shape-04 Nos per window (b) Handle of Z section 20mmx25mm 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf. (d) Z Section 20mmx25mm,100mm long stopper- 01 No per leaf (f) MS pintle hinges of size 75mmx12mm-2 Nos per leaf. (g) Fabrication and fixing arrangement as per Drg No.CEJZ/TD-06/07. Note:- Wire mesh shall be measured and paid separately under appropriate item.
All as per Item No. 25 here-in-before but glazed shutter. Note:- Glass shall be measured and paid separately under appropriate item
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F powder coated aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, 04 nos butt hinges, 02 Nos Tower bolts , 01nos mortice lock, anodised aluminium snap beading screws etc complete all as specified.
S&F powder/ coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F sheet glass 4.8 mm thick ordinary quality to be fixed in Aluminium frame work in square exc 0.5 sqm in each pane
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden surfaces including punching or drilling out old glazing pins/spring clips exceeding 1.5 Sqm and providing and fixing new pins/clips complete all as specified.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling and cutting holes for holdfast into the jambs etc., complete all as specified and directed.
S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock/ Bonsum/ Champlas) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.
S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock / Bonsum / Champlas) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.23 (a).
S&F 100 mm size butt hinges galvanized mild steel, medium weight, cold rolled complete all as specified.
S&F 250 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 150m mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple, and fixed complete all as specified and directed.
S&F125mm mild steel pressed handles, oval type, stove enamelled black
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.
Taking up or down 15 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 15 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified.
Taking up or down 20 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 20 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified.
S&F in replacement 15 mm bore chromium plated bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed complete all as specified.
S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.
S&F in replacement PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.
S&F in replacement 15mm bore brass chromium plated mixer with long spout or mixing hot and cold water for wash basin screwed down for 15 dia iron pipe including braded hose for hot water 15 mm dia complete all as specified and directed. (Make Jaquar)
S&F in replacement 15mm bore brass chromium plated wall mixer and telephonic shower f for mixing hot and cold water screwed down for dia iron pipe complete all as specified and directed. (Make Jaquar)
S&F in replacement 32 mm bore waste coupling of PTMT (half or full threaded) with minimum weight 45 gms complete all as specified and as directed.
S&F in replacement chromium plated grating 125mm dia circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed.
S&F in repairs single piece Europeon style water closet of any colour, including plastic seat cover closed pattern including bolts, anti-syphonage pipe etc and connection to drain (or outgoing pipe) complete all as specified and as directed. Make: Jaquar
S&F in repair vitreous china wash hand basin, bowl type under counter fixable of size 550mmx400mm including beass cp waste coupling and waste pipe including complete all as specified and as directed. Make: Jaquar
S&F in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.
S&F in replacement; sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed by Engr-in-Charge.
Supply, hoist and fix in repairs position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank (PVC/ RCC) complete all as specified .
Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank (PVC/ RCC) complete all as specified.
S&F solid PVC door frame of size 50x47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F aluminum cast type anodized handles 150mm long. complete all as specified.
Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall to make PVC Frame as per specification complete all as specified.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise all as specified and directed by Engr-in-Charge.
M & L for PCC (1:2:4) typeB-2 (using 40mm graded crushed stone aggregates ) lean concrete as in foundation, filling and mass concrete of post complete all as specified .
S&F rolled sections as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-410-W complete all as specified and directed by Engr-in-Charge.
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of colour (as approved by users) having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws as specified.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying one coats of exterior emulsion paint as per manufacurers instructions and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of interior emulsion paint as per manufacurers instructions and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of AC Roof sheets incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of exterior emultion paint as per manufacurers instructions and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
M&L for preparing of old surfaces of walls and applying one coat of birla white putty and finished smooth complete all as specified and directed by Engr -in-charge.
M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for all as specified and directed
Material & Labour for 75 mm thick PCC type D-2, 1:4:8 (using 40 mm graded aggregate), provided for sub base complete all as specified and directed
M&L, sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified
M&L 60 mm thick machine pressed coloured precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment complete all as specified and directed by Engr-in-Charge.
M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors/paths with grey cement and pigments over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified.
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.
Description same as per item No 88 above, but exceeding 1.5 M and not exceeding 3.0M in depth and getting out in any type of soil complete all as specified and as directed.
M & L PCC 1:3:6 type C-2 using 40 mm stone aggregate as in foundation filling and mass concrete as in man holes septic tank soak well and drain complete all as specified and as directed.
Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed size of pipe 100 mm dia.
Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed size of pipe 150 mm dia.
M & L 100 mm internal dia of pipe cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.
M & L 150 mm internal dia of pipe cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.
M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes/Septic tank/Soakage well etc set in cement mortar 1:6 including necessary form work complete all as specified and directed
S&F TMT steel bars 10 mm dia and above cut to length bent to shape, required including cranking benchings spirally hooping for colums hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia
Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexile tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make: Jaquar
Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors complete all as specified and directed by Engr-in-Charge.
Taking down unserviceable Submain of any size as directed by Engr-in-Charge.
Taking down main switch / DB as directed by Engr-in-Charge.
M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of MODULAR TYPE switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for: (a) One light / fan / call bell point controlled by one, one way switch.
One 3 pin socket out let 5 Amps on same board with other switches.
One 3 pin socket out let 5 Amps on Independent board with other switches.
Ditto all as per item No 102 about but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board
S & F switch MODULAR 6 Amps, flush button type, SP, one way, 230 Volts, AC
S & F switch MODULAR 16 Amps, flush button type, SP, one way, 230 Volts, AC
S & F socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230 / 250 Volts
S & F socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230 / 250 Volts
S & F MODULAR fan regulator step type 120W, 02 module complete all as specified and directed.
M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor, FRLS type cable drawn through and including PVC concealed conduit of 20mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire incl suitable size of copper thimbles complete all as specified and directed.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire incl suitable size of copper thimbles complete all as specified and directed.
M & L for sub main wiring with four single core PVC insulated and unsheathed cable 16 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 16 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire incl suitable size of copper thimbles complete all as specified and directed.
Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus all as specified and directed. Make :- Havells, Legrand, Schneider
Supply and fix MCCB 100 Amps 4 pole 415 Volt,25 KA breaking capacity. Make :- Havells, Legrand, Schneider
Supply and fix DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar. Make :- Havells, Legrand, Schneider
S/F MCB SPN 32 to 63 Amps 240 volts Make :- Havells, Legrand, Schneider
S/F MCB SP 6-32 Amps 240 volts Make :- Havells, Legrand, Schneider
Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.
S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.
S&F LED Decorativ mirror light 10Watt complete all as specified and directed.
Supply and Fix recess/ceiling mounting LED light 1x36 Watt cool white ligh of 6500k complete all as specified and directed. Havells model No - DROPDWONFLAT2x2PLR36WLED857S and equivalent in CG/Bajaj
Supply and fixed LED Decorative wall light complete with fitting & fixtures of cap 10 Watt all as specified and directed.
Supply and fixed LED Decorative Bed lamp 03Watt complete with fitting & fixtures all as specified and directed.
Supply and fixed LED Decorative Cup board light 05 Watt complete with fitting & fixtures all as specified and directed.
Supply & fixing in replacement LED street light fitting 30 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50 mm 3 core including GI pipe 32mm light grade 0.9 Mtr long bent to L shape in 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.
Supply & fix Exhaust fan Plastic body AC single phase 230/ 240 V of size 225mm sweep all as specified and directed. Make : Havell's/CG/Orient
Supply and laying GI Tube Med grade 50mm dia with fittings all as specified and directed.
Supply and Fix PVC Conduit pipe Heavy Grade of size 32 mm with all accessories like (Bend/Tee/Junction box) complete all as specified and directed.
Supply & fixing in replacement, suction and discharge pipe line of 1st quality copper, size ½” and 3/8” or 5/8” duly insulated along with 2.5 Sqmm 3 core flexible copper cable PVC sheathed complete all as specified and directed.
Taking down existiing Split Air conditioner carefully (Indoor & Outdoor unit) and fixing the same after servicing, gas charging as required same location all as specified and directed.
Taking down existing Ceiling fan/Wall fan /Exhaust fan capacity/type carefully and refixing the same complete all as specified and directed.
Taking down existing Geyser any capacity/type carefully and refixing the same with replacement of PVC connection/Steel connection and anchor fastener pipe if required complete all as specified and directed.
M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I
M/s GURFATEH BUILDERS
G S TRADERS
M/S Vinod Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .