Madurai District Renovation of Upper Division Clark Quarters For Training Campus in T.Kallupatti RIRD T.KALLUPATTI Block

Amount

Madurai District Renovation of Upper Division Clark Quarters For Training Campus in T.Kallupatti RIRD

Dismantling and clearing away the old cement 20 mm deep plastering inculding all charges etc complete W-0105

Dismantling and clearing away the old cement wall plastering inculding all charges etc complete

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

R.Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter M- 0392

Dismantling and Removing of Indian water closet inculding all charges etc complete

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:4mix to 12 mm thick includingcost and conveyance of all materials to site and all labourcharges etc,.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:3(One cement and Three M.Sand), 10mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Pointing for Pressed tiles, Marble slab and ornamental tiles with CM 1:3 (sch. Item no. 328)

Distempering the old walls and ceiling two coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required .

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Supply and Fixing of Indian Water closet Inculding all charges etc complete

Replacement of 110 mm Pvc Rain water pipe Inculding all charges etc complete

Replacement of 110 mm Pvc Stone ware pipe Inculding all charges etc complete

Provision for Rain water Harvesting Strcutre Inculding all charges etc complete

Wiring with Light Point SD No.20

Wiring withPlug Point SD No.36

Wiring with power Plug Point SD No.39

Wiring with Fan Point SD No.22

Supply and Fixing of Tub Fitting SD No.88

Supply and Fixing of CFL SD No.80

Supply and Fixing of Ceiling fan SD No.107

Supply and fixing of Mosquito net arrangements including all charges etc,.

Supplyandfixingof300mm(12")sweep(lightduty)ACexhaustfancompletewithnecessarywallopeningandmakinggood of the wall SD 114

Providing and laying of pest control (Termide)

Supply and fixing of SS Chimny in all labour charges etc,.Local Rate Qurtation

Supply and fixing of Manhole cover and Chamber slab in all labour charges etc,.M-0640

1000lit Sintex tank WD-M1417

20mm dia UPVC shower valve M-0506

20mm dia UPVC MTA (local rate)

20x15mm Brass Elbow (local rate)

15mm dia Brass Tap M-0509

15mm dia Cock Tap M-0529

25mm dia PVC Pipe for 10 kg/m2 M-0876

25mm dia PVC Elbow M-0888

25mm dia PVC Tee M-0900

25mm dia PVC MTA WD M0114

25mm dia PVC FTA WD - M 0116

25mm dia PVC Union (local rate)

25mm dia PVC Coupling M - 0882

25mm dia PVC Palvalve (local rate)

25x20mm dia PVC Reducer M 090

25x15mm dia Brass Reducer (local rate)

25x15mm dia PVC Reducer Tee (local rate)

20mm dia PVC Pipe M-0875

20mm dia PVC Elbow M-0887

20mm dia PVC Tee M-0899

20x15mm PVC Tee (local rate)

20mm dia Tank nipple M-1194

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

A CHINNA AYYAVOO (BID ID -1283085)