ADDN/ALTN CUM SPECIAL REPAIR TO BLDG NO P-53, P-54 AND P-98 AT NYAY MARG, HASTING LINE AT NEW CANTT PRAYAGRAJ

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on faces of brick work or concrete surfaces CM 1:3, as in ceiling, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling & applying three coat white wash complete all as specified and directed.

M&L preparation of old surfaces of ceiling & applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coat coat of weather coat paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat coat of weather coat paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer over 1mm thick birla white wall care putty complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats oil bound distemper over one coat of primer over 1mm thick birla white wall care putty complete all as specified and directed.

Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and directed

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each (without takig off shutters from the frames) complete all as specified and directed

S&F for pressed steel frame for door with one or more rebates size 105 x 60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc complete size/profile of frame as per IS, complete all as specified and directed

S&F for pressed steel frame for door with one or more rebates size 125 x 60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc complete size/profile of frame as per IS complete all as specified and directed

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc complete all as specified and directed

M&L for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinged pin, anodised and fixed, type C-21 complete all as specified and directed

M&L for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed

M&L for extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed

S&F for aluminium anodised barrel tower bolt extruded section 150 mm long complete all as specified and directed

S&F for Hasp & Staple of size 100mm safety type aluminium anodised , including bolt to hinge plate and fixed with screws fixed in repairs complete all as specified and directed

M&L for stainless steel steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F for 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F for floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed

M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint complete all as specified and directed

S&F for PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & botttom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame including 2 nos aluminium bow handle 150mm and 2nos aluminium tower bolt of size 150mm etc complete all as specified and directed.

S&F in stainless steel harrison rails/ curtain rod fancy type 25 mm dia including bracket, stops, rollers etc complete all as specified and directed

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed

M&L for glazed ceramic coloured tiles in vertical surface 450x300 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed.

M&L for vitrified coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed

M&L for 18 to 20 mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for GI tubing 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for GI tubing 20 mm bore 'medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing 15mm bore pipe and connection in new or old portion (wall, celing etc) complete all as specified and directed

Refixing of GI tubing 20 mm bore any grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc, including trap set in and including concrete and making good to floor complete all as specified and directed.

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

S&F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

Description same all as per serial item No 48 here-in-above but 75 mm bore complete all as specified and directed.

S&F for 110mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed.

Description same all as per serial item No 50 here-in-above but 75 mm bore complete all as specified and directed.

S&F for 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F for 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F for PVC (SWR) branch piece double (double Y) equal or unequal provided with access door 110mm complete all as specified and directed.

S&F for PVC (SWR) branch piece double (double Y) equal or unequal provided with access door 75 mm complete all as specified and directed.

S&F for 75mm dia outlet PVC (SWR) floor trap, plain with granting including jointing with solvent cement complete all as specified and directed.

S&F for vent cowl for 75 mm bore pipe complete all as specified and directed.

S&F for vent cowl for 110 mm bore pipe complete all as specified and directed.

S&F in repair kitchen sinks without drainage board bowl size 410mm x330mm x116mm, made of stainless steel 1 mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed.

S&F in repairs gun-metal gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 1mm thick stainless steel utensil rack of size 600x900mm and fixing to wall with screws complete all as specified and directed.

Dismantling water tanks capacity exc 250 but n. exc 500 Ltrs complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks white colour tripple layers with thread type locking cover arrangement, 500 ltrs (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

S&F for Ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe 20 mm bore or brass ferrule and fixed complete all as specified and directed.

M&L for Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and other similar work complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg ) as in OHT platform, haunching for manhole, over Chajja, cills and other similar work complete as specified.

Supply only liquid water proofing compound complete all as specified.

Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above GL) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, beams, staircase, lintels, chajja, RCC OHT etccomplete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, copies, deck slabs and in shelves complete all as specified and directed.

Use and waste of form work (flat) to rough finished surfacesides and soffits of floor and roof beams, cantilevers, shelves etc complete all specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Cutting holes in brick wall (exc half brick and n exc one brick )in cement mortar or cement lime mortar and stone wall built in lime mortar for holdfasts or inserting rungs for staging or roofs complete all as specified and directed.

M&L for cement concrete 40 mm thick B-2, 1:2:4 using 20 mm graded stone aggregate as in floors finishes even and smooth with using extra cement complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer bedded in cement mortar on roof complete all as specified and directed.

Demolition of cement concrete in roof including plastering and leeping including cleaning surface of roof with wire brush / mechanical brush throughly to remove old dirt / loose particles to expose clean concrete slab clean with watering etc complete all as specified and directed.

M&L for cutting out cracks to V section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry in 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone agg with WPC as in padding to maintain proper slope as required complete all as specified and directed. (WPC shall be paid separatly)

M&L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumen painting with hot blown grade bitumen 85/25 @ 1.20 Kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric ( wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerb / benching in radius 10 cm with waterproofing compound as per manufacturer's instructions complete all as specified and directed.

M&L for 40mm thick brick tiles laid on cement mortar 1:6 and pointing in CM 1:3 including 15mm thick screed bed complete all as specified and directed.

Description same all as per item No 83 above but except tile complete all as specified and directed.

S&F for 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters/CB shutter fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portionshall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

Supply only autoclosing hydrolic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete all as specified and directed

Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and directed

S&F in repair for 125 mm size fancy type chromium plated shower rose with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Wall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. Make : Jaquor cat part COP -273PM or equivalent as per approved make list complete all as specified and directed.

S&F for corner glass self (with bracket) complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1173 or equivalent as per approved make list

S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed.Make :Jaquor Cat part SHA-CHR-479L450

S&F for in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

S&F for waste coupling 32mm size full thread with (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60ms) complete all as specified and directed.

S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent as per approved make list

S&F for Pillar taps, swan neck fancy type cast copper alloy, with capstan heads, chromium plated,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and irected. Make :Jaquor Cat part OPP-CHR-15005BPM or equivalent as per approved make list

S&F for Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and irected. Make :Jaquor Cat part OPP-CHR-15005BPM or equivalent as per approved make list

S&F for angular stop cock with wall flange complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15053PM or equivalent as per approved make list

S&F for frameless swivel mirror complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1195N or equivalent as per approved make list

S&F for towel ring complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1195N or equivalent as per approved make list

S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F for two way bib cock with wall flange complete all as specified and directed.Make : Jaquor cat part KUP-CHR-35041PM or equivalent as per approved make list

S&F for hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed.Make : Jaquor cat part ALD-CHR-573 or equivalent as per approved make list

S&F for toilet paper holder with flap complete all as specified and directed. Make : Jaquor cat part AQN-CHR-7753 or equivalent as per approved make list

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down, screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F for single lever sink mixer with swinging spout on upper side(wall mounted model) with connceting legs and wall flanges complete all as specified and directed.Make : Jaquor cat part LYR-38165 or equivalent as per approved make list

S&F for 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms complete all as specified and directed

S&F for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed

S&F of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils size 8" with necessary fixing clips and channels etc. complete all as per specified and directed. Make: ( Hettich, Cat part No.9190384 ) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc, complete all as per specified and directed. Make: ( Hettich,Cat part No.9194314) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: (Hettich, Cat part No.9194319) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: (Hettich,Cat part No.9275311) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (Cargo basket) pull out type, size 486 x 550 mm with necessary sliding frame structure, fixing clips etc, complete all as per specified and directed. Make: (Hettich,Cat part No.9159552) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (under sink basket) pull out type, size 500 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Cat part 9190451 including GST) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: ( Hettich,Cat part No.9190384) or equivalent as per approved make list

S&F of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed. Make: (Hettich, Cat part No.9191711) or equivalent as per approved make list

S&F for Providing and fixing factory made upvc white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose).

S&F for 4.8mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed

M&L for point wiring with concealed in wall 2.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 2.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit complete all as specified and directed Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

Description same all as per serial item No 123 here-in-above but for 3 pin 5 Amps switch socket on independent board with 2.5 sq mm copper cable complete all as specified and directed

Description same all as per serial item No 123 here-in-above but for 3 pin 15 Amps switch socket on independent board with 2.5 sq mm copper cable including 2.5 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed

Description same all as per serial item No 123 here-in-abovebut for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed

Description same all as per serial item No 123 here-in-above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed

Description same all as per serial item No 123 here-in-above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed

S&F for modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F for modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F for modular switch 2 way, 6 amps, 230V AC, one way complete all as specified and directed

S&F for modular bell push flush type 6 amp, 1 module SP, 230V AC complete all as specified and directed

S&F for call bell Dingdong type AC 230 Volts single pole complete all as specified and directed

S&F for ceiling rose surface backelite three terminals complete all as specified and directed

S&F for modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

S&F for LED Batten light fittings decorative ultra slim linear fixture,20 Watt, efficiancy 120 Lm/watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps all as specified and directed.Make Philips Cat No. BN170C LED 20 S -6500 PSU L1 120 or equivalent in Wipro/Bajaj as approved by GE.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make Philips Cat No. BN170C LED 10 S -6500 PSU L1 120 or equivalent in Wipro/Bajaj as approved by GE.

Supply & fixing wall mounted fitting fancy type (City -2 type) with 9 watt LED bult inverter type including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make -Cat No. City -2 type of Havells or equivalent in Wipro /Bajaj

S&F for Lamp holder insulated body PVC/polycarbonate with back plate and 9 W LED bulb inverter type suitable for batten fitting complete all as specified and directed. Make. Philips/ Wipro/Bajaj

S&F on wall building security light luminaire for 1x35 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one all as specified and directed.all as specified. Make philips cat no.BRP030 P LED 35CWSLRGRPSUSPD or equivalent in Wipro/ Bajaj as approved by GE.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades and repair, servicing, paiting if required and after repair made serviceable condition to fix same place complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including antidust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m including including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 4 pole MCCB 100Amp 25 KA - 01 fixed type Nos and SP MCB 63 Amps 'C' curve 10 KA - 12 Nos outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified.NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. Make - Legrand/L&T/ Scheinder

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-43), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,TP&N 4ways 415 volts Note: MCB/ shall be measured and paid seperatly under respective item of this schedule Make - Legrand/L&T/ Scheinder

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP&N 8 ways ,220 volts Make - Legrand/L&T/ Scheinder Note: MCB and MCB/MCCBs shall be of same make and shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of Triple poles and neutral current carrying capacity 100 AMP, in the MCB DB Complete with connection testing and commissioning.Make - Legrand/L&T/ Scheinder

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning. Make - Legrand/L&T/ Scheinder

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.Make - Legrand/L&T/ Scheinder

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning. Make - Legrand/L&T/ Scheinder

M&L in replacment of four single core (submain) FRLS PVC insulated cable of 10.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 10.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed. Note:- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) four run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Taking down carefully geyser any size and any make after disconnecting the electrical connection, dismantling the accessories and repair, servicing, paiting with Hot water heavy duty connection pipe 2 Nos and after repair to fix same place complete all as specified and as directed.

S&F for 60cm auto clean wall mounted chimeny with stainless steel baffle filters, push button control, exhaust flexible pipe of suitable size as per site requirement complete all as specified and directed. Make Faber Model No. Hood topaz 3D smart BK TC LTW90 or equivalent as approved by GE

Schedule of Credit (MINUS) Rs. 97,367.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum