ADDITION / ALTERATION / RENOVATION TO BUILDING NO.P-47A FOR SETTING UP NEW CGRPT ADMIN OFFICE AT CGRPT CHENNAI UNDER GE (I) (CG) CHENNAI.

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and as directed.

Material and labour for 25 mm thick PCC, 1: 2:4, type B-0 using 12.50mm graded stone aggregate mixed with water proofing compound as per manufacturer's instructions as in roof padding finished the surfaces even and fair to receive top layer complete all as specified and as directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning the rendered surfaces of concrete with wire brush and and remove dust, dirt, loose particles etc. complete all as specified and as directed.

Material and Labour for providing water proofing treatment with membrane type water proofing method using APP modified prefabricated five layer water proofing membrane matt finish, 3 mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 150gms/Sqm) matt black finished laid on primed surface by torch application of membrane using gas burner with 100 mm overlap as per manufacturers instructions with top most layer of surface finished with one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm etc., complete all as specified and as directed. Note: (i) The work shall be executed through Manufacturer's applicator approved by GE. (ii) The quoted rate is deemed to include the cost of digital photograph and plaster plate as per PS.

Material and labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed.

Material and labour for coloured Vitrified Ceramic tiles of grade B-I (a),9-10 mm thick (square/ rectangular) polished, light shade, area of each tile exceeding 0.18 Sqm not exceeding 0.38 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for coloured Vitrified ceramic tiles of grade B-I(a), 9-10mm thick of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:3, 10mm thick all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc., complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm not exc 4sqm each along with fittings including separating guard bars/grills/wire mesh etc., complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Supply and Fix powder coated aluminium sections for frame of doors, windows, partitions etc., having thickness of powder coating not less than 50 micron and colour as approved by GE/ Engineer - in Charge with one or more rebates including necessary joining cleats etc., complete all as specified and directed.

Supply and Fix in repairs powder coated aluminium door shutters, having thickness of powder coating not less than 50 micron and colour as approved by GE, using aluminium section weighing not less than 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, 2 Nos. of handles in each door shutter, powder coated aluminium snap beading, screws etc., complete all as specified and as directed. Note : Powder coated Aluminium frame for Doors Glass panes and wire mesh shall be measured and pais separately.

Supply and Fix in repairs powder coated aluminium window and ventilator shutters, having thickness of powder coating not less than 50 micron and colour as approved by GE, sliding type without sash bar using aluminium section weighing not less than 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, rollers, interlocking handles etc complete all as specified and as directed. Note : Powder coated Aluminium frame for two track/three track sliding windows, Glass panes and wire mesh shall be measured and pais separately.

Supply and Fix Powder coated aluminium grill having thickness of powder coating not less than 50 micron and colour, design/pattern as approved, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved poeder coated aluminium standard section around the opening etc., complete as per requirement and direction of Engineer-in-charge.

Supply and Fix plain sheet glass pane, 4.80mm thick, ordinary quality and glazing with neoprene rubber / wooden beads in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and Fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or un-plastered surfaces of walls including pilasters and cornices etc by brooming down or using steel wire brushes with scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots etc and applying one coat of Oil Bound Distemper etc., complete all as specified and as directed.

Material and labour for 2.0 mm thick Wall Care Putty in two or more coats including cleaning the wall surface with the help of sand paper, putty blade or with wire brush, then apply first coat of white cement based wall care putty on moistened surface and after surface dried, rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to get glossy surface complete all as specified and as directed.

Material and labour for preparation of old decorative plastered or un plastered surface of walls including pilasters and cornices etc and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorative plastered or un plastered surface of ceilings and applying one coat of white wash complete all as specified and as directed.

Supply and Fix 20mm dia stainless steel decorative curtain rod made out of stainless steel tube, standard quality of grade AI SI-304, polish finish of wall thickness not less than1.5mm, fixing to all opening and joineries portion complete all as specified and as directed.

Supply and Fix stainless steel decorative bracket with end holders for fixing curtain rod of 25mm diameter complete all as specified and as directed.

Demolition of PCC in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as dircted.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles portions ordered to be dismantled.

Taking down cement plaster on brick or stone walls,etc including raking out joints, hacking for key scrubbing down with water etc., including removal of rubbish off the premises complete all as specified and as directed.

Demolition of reinforced cement concrete as in landings, chajjas, beams and other suspended work complete all as specified and as directed.

Material and labour for RCC 1:2:4, type B-0, using 12.5 mm graded stone aggregate as in repair of column, chajja, cill, facia, parapet etc., including necessary formwork complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on other than fair faces of brick/concrete surfaces, finished even and fair externally complete all as specified and as directed. Note: WPC will be measured and paid separately.

Material and labour Rendering 10 mm thick on other than fair faces of brick wall or stone masnory in Cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound of approved quality.

Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc., and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour all as per manufacturer's specification etc., complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed.

Supply and Fix 2nd class hard wood 35 mm thick factory made plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density,wood particle board with commrercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1) klin seasoned and chemically pressure treated complete all as specified and as directed.

Supply and Fix 2nd class hard wood (SAL) plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint including treating back of chowkats with coal tar etc., complete all as specified and as directed.

Supply and Fix 2nd class factory made hardwood glazed and skeleton door shutters, 35mm thick divided into squares, open rebated and prepared to receive glass, gauge etc., with sash bars, edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.24 (b) supplied and fitted to chowkats complete all as specified and as directed.

Supply and Fix Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete as specified and as directed.

Supply and Fix 19mm thick flush shutters, factory made, solid core construction with block board core and ply wood face panels, comercial type on both sides as in cupboard shutters all as specified and as directed.

Supply and Fix aluminium anodised barrel tower bolt 125 mm complete all as specified and as directed.

Supply and Fix aluminium anodised barrel tower bolt 200 mm long complete all as specified and as directed.

Supply and Fix 250 mm long Aluminum alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all complete as specified and as directed.

Supply and Fix Mild Steel Butt hinges of size 75 mm, cold rolled, medium weight and fixed with screws complete as specified and as directed.

Supply and Fix Mild Steel Butt hinges of size 100 mm, cold rolled, medium weight and fixed with screws complete as specified and as directed.

Supply and Fix 300mm Mild Steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

Supply and Fix 100mm extruded aluminium alloy handles, fabricated type, anodised and fixed with screws complete as specified and as directed.

Supply and Fix 150mm extruded aluminium alloy handles, fabricated type, anodised and fixed with screws complete as specified and as directed.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

Material and labour for preparation of old painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking up or down old rusted steel tubing 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse etc., complete all as specified and as directed.

Taking up or down old rusted steel tubing 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse etc., complete all as specified and as directed.

Supply and Fix 20mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed.

Supply and Fix 25mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed.

Supply and Fix Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks,1000 litres capacity, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed.

Supply and fix in repairs Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet Single piece (size-840mmx390mmx720 mm) trap distence P-180 suite composite flushing cistern (Pedestal pattern), white colour including fixing bolts with flush pipe, including flushing cistern with connection pipe complete all as specified and as directed.

Supply and Fix in repairs wash basin (Size 875 X 610 X 475mm) with full pedastal floor standing, white colour flat back excluding taps,including waste,plug and porcelain stopper incl. brackets etc. complete including cutting for and pinning in ends of brackets supply and waste pipe and all as directed.

Supply and Fix in repairs 15mm bore dia swan neck Pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs Bib tap, 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule with extended lever and wall flange and fixed complete all as specified and as directed.

Supply and Fix in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube 8mm dia chromium plated and ABS wall hook all of Jaquar Cat No. ALD-573 or technocommercially equivalent of other specified makes including making connections and fixed in position complete in all respect as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel of Jaquar Cat No. AHS-1551 or technocommercially equivalent of other specified makes complete all as specified and directed.

Supply and Fix in repairs Tubular towel rail, Brass chromium plated, 20mm dia, 60cm long between flanges complete all as specified and as directed.

Supply and Fix in repairs 15mm dia concealed angle cock, cast copper alloy, fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, with long shanks and cup screwed both ends for iron pipe or for unions fixed complete all as specified and as directed.

Supply and Fix Overhead shower (Size 150x150mm) squar shape single flow ( body & face plate of brass with chrome plated) with rubit cleaning system complete all as specified and as directed.

Supply and fix in repairs Soap dish Polycarbide fixed of Jaquar Cat No. AQN-7733 or technocommercially equivalent of other specified makes with and including chromium plated brass screws with wooden plugs complete all as specified and as directed .

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide, 600 mm long or next higher size with chromium plated bracket guard and railing fixed with and including chromium plated brass screws with wooden plugs complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated wall mixer valve 3-in-1 for mixing hot and cold water, fancy type, with provision for both hand shower and overhead shower, complete with and including 115mm long bend Pipe, telephone shower, connecting legs and wall flange fixed to 15mm bore GI pipe complete all as specified and as directed.

Supply and Fix hand dryers of material ABS smart flow, white finish complete all as specified.

Supply and fix in repairs 15 mm dia PVC connection pipes of 375 mm long with PTMT nut at both ends complete all as specified and as directed.

Material and labour for cutting holes into or through brick walls built in cement mortar or lime mortar and stone walls built in lime mortar or walls of lime concrete exc 150 sq.cm but n.exc 400 sq.cm all as specified and as directed.

Supply and Fix Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as per specification & drawing shown in MES schedule part II complete all as specified and as directed.

Supply and Fix Factory made PVC Solid panel door shutters 30mm thick (style) solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supply and fixing in the frame at site as per specification and drawings shown in MES schedule part II complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.

Supply and fix in repairs powder coated aluminium snap grid frame work having thickness of powder coating not less than 50 micron and colour as approved by GE/ Engineer - in Charge of size 605mm x 605mm for false ceiling as detailed below and complete all as specified and as directed:- (a) Main 'T': Length 3600mm, Web 25mm, Flange 35mm & 0.7mm thick. (It shall be Suspended from the soffit @ 1200mm C/C with level clip). (b) Cross 'T': Length 1200mm, Web 25mm, Flange 35mm & 0.7mm thick (It shall be inserted/fixed into the slots of main 'T' @ 600mm to from a grid of 1200 x 600mm). (c) Cross 'T' Length 600mm, Web 25mm, Flange 35mm and thickness 0.7mm (It shll be inserted/ fixed into the slots of main 'T' @ 600mm to from a grid of 600 x 600mm). (d) Wall angle Web & flange shall be 25.40mm and thickness shall be 0.8mm fixed to the perimeter wall of the wall portion. (e) Level clip with wire : 4mm dia Wire shall be used @ 1200mm c/c to hold the main 'T' (f) Soffit cleat : Web 25mm, Flange 37& 25mm and thickness 1.80mm Used at 1200mm c/c to the roul plug to suspended level clip with wire (g) Row Plug : 12.7 diameter used @ 1200mm c/c in both c/c in both direction. Note : GI Wire suspenders/hangers, ceiling cleats and hold fasteners shall be measured and paid separately.

Supply and fix in repairs powder coated Gl frame work for seamless ceiling comprising of powder coated Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and as directed. Note : GI Wire suspenders/hangers, ceiling cleats and hold fasteners shall be measured and paid separately.

M&L for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish Note : Frame work for ceiling, GI Wire suspenders/hangers, ceiling cleats and hold fasteners shall be measured and paid separately

Supply and fix in repairs Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Supply and Fix 8mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in powder coated aluminium snap grid frame work of false ceiling complete all as specified and as directed. Note : Frame work for ceiling, GI Wire suspenders/hangers, ceiling cleats and hold fasteners shall be measured and paid separately.

Material and Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over including preparation of old treated surfaces complete all as specified and as directed.

Demolition and breaking 150 mm dia., drain pipes (Salt glazed ware, AC or reinforced concrete set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete as directed by the Engineer in Charge. Note: Excavation earthwotk, Returning filling in and removal of soil if required shall be measured and paid separately.

Material and Labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes, 150mm bore laid in trenches and jointed in cement mortar 1:1 on concrete bed including Concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including testing after laying of pipe complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of under ground cables, pipes/pipe lines, etc. and the like not exc. 10 Sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type soil complete all as specified and as directed.

Removing Excavated soil to a distance execeeding 500m and up to total distance of 1.5 KM and depositing where directed at a level not exe 1.50 m above the starting point complete all as specified and as directed.

Dismantling rain water pipes and sewage pipe line (any size or pattern) including all fittings, heads, shoes. Bends, swan-necks etc., complete all as specified and as directed.

Supply and Fix 110mm dia UPVC (SWR) pipes single socketed, in any length with solvent joints, laid in trenches or in floors/fixed to walls complete all as specified and as directed.

Supply and Fix 75mm dia UPVC (SWR) pipes single socketed, in any length with solvent joints, laid in trenches or in floors / fixed to walls complete all as specified and as directed.

Supply and Fix UPVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and as directed.

Supply and Fix UPVC (SWR) bends any radius, 110mm borecomplete all as specified and as directed.

Supply and Fix UPVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and as directed.

Supply and Fix UPVC (SWR) reducers any radius 110mm bore complete all as specified and as directed.

Supply and Fix 110mm bore UPVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and as directed.

Supply and Fix UPVC (SWR) vent cowl 75mm dia complete all as specified and as directed.

Material and labour for Mild steel TMT bars in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D all as specified and as directed.

Material and labour for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D all as specified and as directed.

Material and Labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.

kvs constructions (BID ID -3306008)