8351 REPAIR REPLACEMENT OF PLUMBING CLEANING OF WATER TANKS INTERNAL WATER SUPPLY FITTINGS PVC TANKS AND OTHER MISC WORKS IN AFMC UNDER GE (CENTRAL) PUNE

Amount

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and set in CM 1:6 all as specified & directed.

M & L for precast cement concrete block masonry exceeding not exceeding10cm in width with solid blocks of PCC (1:5:8) grade D-4 and set in CM 1:4 all as specified & directed.

Taking down cement plaster on brick masonry / PCC block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L for 15mm thick rendering in CM 1:6 over Stone / brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified & directed..

M & L for 15mm thick rendering in CM 1:4 over Stone / brick / concrete wall surfaces trowelled to even & smooth without using extra cement for external wall surfaces complete.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and directed.

M & L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash all as specified & directed..

M & L for Coloured Glazed Ceramics tiles 450 x 300 x 7 to 8 mm thick in vertical surfaces such as in skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick plaster in C:M 1:4 as a backing coat including dismantling existing wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L for Coloured Glazed Ceramics tiles 600 x 300 x 7 to 8 mm thick in vertical surfaces such as in skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick plaster in C:M 1:4 as a backing coat including dismantling existing wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L for coloured non-skid tiles 400 x 400 x 7 to 8mm thick as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Material and labour Virified Ceramic tiles light shade polished, of size 600mm x 600mm x 10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in CM (1:6) including dismantling existing tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

All as per item No 13 above but in skirting / vertical surfaces over and including 10mm thick baking coat of CM 1:4 in complete all as specified and directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar.

M & L 20 mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces and fix in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L chamfer, splays or arris in facework to granite exc 15 mm but not exc 50 mm wideall as directed.

M & L 20 to 25 mm thick Machine cut cudappah stone slab, laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete complete all as specified and as directed.

M & L PCC (1:2:4) type- B-0 (using 12.5mm graded stone aggregate) as in chajjas , roof kerbs , rounded or chamfered on edges, including with using water profing chemical compound including use and waste of necessary form work including demolition of old cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (un-reinforced) complete all as specified.

M & L for 15 mm thick rendering in CM 1:3 over Stone / brick / concrete surfaces of chajjas, extended facias etc , trowelled to even & smooth with using extra cement including liquid water proofing chemical as per manufacturere's instruction complete all as directed. Note :- Water proofing compound shall be measured and paid separately at supply rate only.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as directed.

M & L for 25 mm thick PCC type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in levelling course for floor tiling etc complete;

M & L for 75mm thick PCC (1:4:8) type C2 (using 40mm graded stone aggregate) as in sub base /flooring / paving etc complete;

M & L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection / hard standing, finishing the cement oncrete surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rubber moulded precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300 x 20mm thick, conforming to IS-1237 (2006) set , jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L Cement concrete 1:5:10 (using 40 mm graded stone aggregate ) as in foundations, filling, sunken portion and mass concrete all as specified and directed.

M & L rendering 15 mm thick on brickwork or concrete surfaces in CM 1:3 with using liquid water proofing compound in sunken portion. Note :- Water proofing compound shall be measured and paid separately at supply rate only.

Supply only integral water proofing compound.

M & L for applying two coats of polymeric based chemical on plastered / concrete surfaces as per manufacturer's instructions in sunken portion etc complete. Make of Polymeric chemical as approved by GE.

Taking up or down GI steel tubing and connections including cleaning for refixing or removing from site all as directed of following sizes :-

(a) 15mm bore dia

(b) 20mm bore dia

(c) 25mm or 32 mm bore dia

(d) 40 mm or 50 mm bore dia

Refixing old steel tubing and connections with new fitings in new or old postion (wall / floor /ceilings etc) all as directed of following sizes :- Note :- GI tubing shall be reused obtained from item No 30 above

(a) 15mm dia

(b) 20mm dia

(c) 25mm or 32 mm dia

S & F GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc all as directed of following sizes :- .

(a) 15mm dia bore

(b) 20mm dia bore

(c) 25mm dia bore

(d) 32 mm dia bore

(e) 40 mm dia bore

Supply and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings complete to walls/ ceiling laid in floor/ trenches including all special fittings like brass elbow, brass tee, male/ female brass threaded adaptor, tank adaptor, union etc complete all as specified and directed for following sizes :-

(a) 16mm outer dia

(b) 20mm outer dia

(c) 25mm outer dia

(d) 32 mm outer dia

(e) 40 mm outer dia

Unplasticised PVC pipes of pressure rating 10kg/ Sqcm fixed complete to walls, ceilings or in floors/ laid in trenches etc any type of pipe including all necessary fittings for following dia :-

(a) 15mm dia bore

(b) 20mm dia bore

(c) 25mm dia bore

(d) 32 mm dia bore

Supply and fix PVC (SWR) floor trap/ Nahani Trap, plain with grating including jointing with solvent cement 75mm dia out let.

PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm dia out let

S & F stack clamps made out of 50 x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore dia pipe complete

S & F 75mm bore, PVC(SWR) branch piece, single (Single Y) equal or unequal

S & F 110mm bore, PVC (SWR) branch piece, single (Single Y) equal or unequal

PVC 75mm bore, (SWR) junction single, (Single T) equal or unequal

PVC 110mm bore, (SWR) juction single (Single T) equal or unequal

S & F special fittings (BALL VALVE) for CPVC pipes of following sizes :

(b) 20mm outer dia

(c) 25mm outer dia

Cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves , lintels etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete.

S & F in repairs vitreous china squatting Pan "Orissa" pattern of size 580 mm X 440 mm white with integral foot rests including cast iron 'P' or 'S' trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding and connection to trap, and to flushing pipe, antisyphonage pipe etc. complete including making good to floor complete all as specified and directed. .

S & F in repairs vitreous china wash down water closet pan (pedesal pattern), white including connection to drain (or outgoing pipe ) and to flushing pipe with and including Plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. .

S & F in repairs vitreous china ceramic white Single peice WC (S or P trap) with UF soft close seat cover, hinges, accessories set , size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent make specified in Appdx 'A' list of Makes complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete complete all as specified and directed. .

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm , bowl size 410 mm x 330mm x 160mm complete all as specified and directed..

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply of 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe and fixing waste pipe etc.complete all as specified and directed .

S & F in repair WHB oval shaped vitreous china , under / over counter , snow white, fancy type of overall size 560 x 470 mm, Cat No S2030104 of CERA or equivalent make specified in Appdx 'A' list of Makes including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed.

S & F 15 mm bore pillar taps, fancy type swan neck spout (Left) and aerator, Cat No. F2002104 of cera or equivalent make specified in Appdx 'A' list of Makes complete.

S & F 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed.

All as per Item No 51 above but fixed in repairs

S & F in repairs 15 mm bore bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm chromium plated wall mixer (2-in-1) with arrangement for overhead shower complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No 57 above but Long shank concealed type

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete

S & F in repairs flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern / wash hand basin / sink complete .

S & F stainless steel gratings 100 mm dia with hole for waste pipe complete.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete.

S & F in repairs chromium plated health faucet including flexible cord with Hose & Hook complete all as specified and directed..

S & F in repairs chromium plated toilet paper holder complete.

S & F in repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges complete all as specified and directed.

S & F rotational moulded polythylene water storage tanks of 500 Ltrs capacity tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc dismantling water tanks complete all as specified and directed.

S & F rotational moulded polythylene water storage tanks of 1000 Ltrs capacity tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc dismantling water tanks complete all as specified

S & F rotational moulded polythylene water storage tanks of 2000 Ltrs capacity tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc dismantling water tanks complete all as specified

M & L for Cleaning of PVC water tank of capacity exc 250 Ltrs but not exc 500 Ltrs and removing all scale and dirt with using bleaching powder etc from tanks and from mouths of circulating pipes etc. including disconnecting existing tanks , hoisting and refixing in position if required reconnecting with including all neccessary fittings complete all as directed.. Note :- Date of cleaning should be written in synthetic enamel paint of 10 cm height using Tensile in format of - "CLEANED ON : DD/MM/YYYY"

All as per Item No 70 above but capacity exc 500 Ltrs but not exc 1000 Ltrs capacity.

All as per Item No 70 above but capacity exc 1000 Ltrs but not exc 2000 Ltrs capacity.

M & L for Cleaning of RCC water tank of any capacity including removing all scale and dirt with using bleaching powder etc from tanks and from mouths of circulating pipes etc. complete. Note :- Date of cleaning should be written in synthetic enamel paint of 10 cm height using Tensile in format of - "CLEANED ON : DD/MM/YYYY"

S & F 20 mm bore dia ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule complete (Weight not less than 210 gms) all as specified and directed..

S & F in repairs 20 mm bore dia ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule (Weight not less than 210 gms) all as specified and directed..

S & F in repairs 20 mm bore dia gun metal globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe all as specified and directed..

S & F in repairs 25 mm dia gun metal globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe all as specified and directed..

S & F 75 mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches / floor or fixed to walls complete all as specified and directed...

S & F 110 mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches / floor fixed to walls complete all as specified and directed...

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified & directed.

S & F 110mm bore PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified & directed.

S & F Transparent Glass 7.5 x 7.5 inch for corner bathroom shelves with bracket (set of 2) complete

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified & directed..

S & F 25mm bore dia aluminium powder coated fancy type curtain rod with rings @ 10cm c/c etc complete all as specified.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

Taking down angle iron / wooden chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) not exceding 1.5 Sqm each complete all as specified and directed.

& F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drawing given on page 176 of SSR 2020 Part II. The width of stiles and rails shall be all as specified in para 8B.2.1 on page 145 of SSR 2020 Part II complete all as specified and directed.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel complete all as directed.

S & F 150 mm aluminium powder coated barrel tower bolts of extruded section complete all as directed.

S & F in repairs 150 mm aluminium powder coated barrel tower bolt of extruded section 1complete all as directed.

S & F 300 mm long aluminium alloy , powder coated sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F 150 mm extruded aluminium powder coated handles, fabricated type complete all as directed.

S & F in repairs 150 mm extruded aluminium powder coated handles, fabricated type complete all as directed.

Taking down shutters of any description exceeding 1.00 Sqm but not eceeding 2.00 Sqm each complete all as specified and directed..

S & F ventiltors / louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as given in Appdx 'A' LList of Makes and including rubber beading etc and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S & F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc. all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

M &L rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing inclunding necessary hinges and locking arrangements conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

M & L Mild steel, plain, black sheet 1.0 mm thick as in covering to door shutters , covering to door chowkats (frames) , chullah hoods , water tanks , water troughs , ducts ' urinal troughs and funnels etc. cut to size edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members etc. with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc. as required complete all as specified and directed..

M & L for preperation of new or previously untreated surfaces of steel or iron of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed..

Dismantling Wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards /slabs / blankets , any thickness including cover fillets , frame work / snap grid complete.

S & F in true horizonal level 595 x 595 mm false ceiling with Gypsum ceiling board for ceiling prepainted, perforated finish including GI snap grid of size 600 x 600 mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 32 x 24mm x 0.5mm thick at every 1200mm centre to centre maximum and rotary stitched cross tee of size 25 x 24mm x 0.5mm thick at 1200mm centre to centre and wall angle of size 20 x 20mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm centre to centre in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans / light complete all as specified and directed.

M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

M & L for decorative POP cornices / moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

Mourya Enterprises

shiva traders

SUNHARI CONSTRUCTIONS

REKHA ELECTRICALS

PRASHANT CONSTRUCTION

L.T Associate

AARYANS GLOBAL INDIA