Special repair to the Residential Qrs. (Type-IR, IIR, FHC Qrs.) at Nuabazar area for the year 2020-2021.

Amount

Dismantling and removing the following damaged items with required staging, scaffolding, cleaning the debrises including all leads & lifts, transportation with supply of all labour, T&P, taxes, etc. complete as per direction of Engineer-in-charge. (Excluding GST)

a) Cement plaster.

b) Brick works.

c) Dismantling of R.C.C. work in chajja, fin, drops, beam, column, lintels, kitchen slab, wall almirah slab, etc.

d) A.S. flooring / Concrete flooring.

e) Graded Concrete/Terracing.

f) Door/window Chaukath with shutter.

Brick work with KB bricks having crushing strength more than 75 Kg / Cm² in CM 1:6 ( 1 cement: 6 coarse sand) including splays cutting, curing, racking out joints,with required staging, scaffolding for all floor complete with supply of all materials, labour, T&P, taxes, tollage, royalties etc. complete as directed by Engineer-in-charge.(Excluding GST)

a) For Foundation and plinth.

b) For SuperStructure at all heights.

CC (1:4:8) ( 1 cement: 4 coarse sand: 8 graded stone metal of 40mm nominal size crusher broken Hard Black Granite Stones of approved quality) in foundation including mixing, hoisting and laying the concrete in position, Ramming, consolidating, compacting, curing, etc. all complete with supply of all materials, labour, T&P, taxes, tollage, royalties, etc. complete as per the direction of Engineer-in-charge. (Excluding GST)

CC 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate of 20mm to 12mm size crusher broken) Hard Black Granite of approved quality for RCC work including mixing, hoisting and laying the concrete in position, finished smooth to the exposed surface, consolidating with vibrator where found necessary, curing, etc. all complete with supply of all materials, labour, T&P, taxes, tollage, royalties, etc. complete in all respect as per the direction of Engineer-in-charge.(Excluding GST)

Supplying, cutting, straightening, bending, binding and placing in position the reinforcement bars of Fe500 confirming to I.S. specifications of SAIL/TISCON/RINL/ Electrosteel make with supply of binding wire of 18 to 20mm. gauge with supply of all labour, materials, T&P, taxes, tollage, etc. complete as directed by the Engineer-in-charge. (Excluding GST). NB: No wastage shall be paid co-efficient taken as per IS 1786.

Cement plaster in CM (1:4) (1 cement: 4 coarse sand) over Brick Work/Concrete surface including chipping & cleaning the surface with supply of all materials, labour,T&P, scaffolding, curing with all taxes, royalties, etc. all complete as directed by the Engineer-in-charge. (Excluding GST)

a) 12mm thick cement plaster. (1:4)

b) 16mm thick cement plaster. (1:6)

25mm. thick A.S. flooring with CC (1:2:4) using HBG aggregate of 12mm. and down size crusher broken chips including mixing, hoisting, laying,compacting, consolidating, curing, finished smooth to the exposed surface for all floors with supply of all lalbour,T&P, taxes, etc. all complete as directed by the Engineer-in-charge. (Excluding GST)

Providing rigid smooth leak proof centering and shuttering for the RCC works by providing approved steel/Ply shutters including supply of all materials, labour, T&P, taxes, scaffolding, etc. complete for all floors and dismantling the same after proper setting as per the direction of Engineer in charge. (Excluding GST)

a) For foundation & Plinth

b) For RCC slab chajja, fin, drops, beam, column, cornice lintels etc.

40mm (avg.) thick graded concrete with C.C(1:2:4) with addition of 2% WPC by using 12mm and down size crusher broken chips of approved quality including chipping & cleaning the existing surface before concrete work with supply of all materials, labour, T&P, taxes, curing, scaffolding for all floors etc. Complete as per direction of Engineer in-charge.(Excluding GST)

Distempering one or two coats to the wall surface with approved oil bound distemper and shade including scraping, sand papering, cleaning the wall surface, filling the holes with plaster of parish, scaffolding charges at any height with supply of all materials, labour, T&P, all taxes, etc. complete as per the direction of Engineer-in-charge (For all floors).(Excluding GST)

a) For one coat

b) For two coat

Making door sill of size 3"x2" with cc(1:3:4) by using 12mm & down hard granite chips of approved size an quality with finishing the surface with punning works including supply of all materials, labour, T&P, taxes, royalties, curing etc. complete as per the direction of Engineer-in-charge (For all floors).(Excluding GST)

Net cement punning over cement plaster using cement @2.20 kg/m2 & curing with cost of labour, materials, T&P, taxes, royalties, curing etc. complete as per the direction of Engineer-in-charge (For all floors).(Excluding GST)

Panting two coats of Weather coat painting over plastred surface with approved quality & shed over a coat of primer after scrapping, sand preparing & cleaning the surface & filling the joints & holes with putty(boiled or raw) where found necessary before paint including all cost & supply of all labour, materials, T&P, scaffolding at any height all complete as per the direction of Engineer-in-charge. (Excludicng cost of GST)

Painting one or two coats with enamel paint of approved quality & shade to wood works/grill work including scraping, sandpapering & cleaning the surface, filling the holes by wax putty with supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete as per direction of Engineer-in-charge ( for all floors). (Excluding GST)

a)For one coat

b)For two coat with primer

Providing and applying of 3mm thick A.P.P. water proofing membrane black finished reinforced with non-woven polyster matt consisting of a coat of bitumen primer for bitumen membrane @0.40 Lit / Sqm by the same membrane manufacture of density at 25ᶛC, 0.87-.0.89 Kg / Lit. and viscosity 70-160 ops over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under joint strength in longitudinal and transverse direction at 23ᶛC when tested in accordance with ASTM. D-5147 including of 100mm lapping after making the surface free form loose particles, oil grease, fungus or any other contaminantes including cost and supply of all labour, material, T&P, complete as per the direction of Engineer-in-charge. The laying of membrane shall be got done through the authorized applicator of the manufactuer of membrane (Excluding GST).

Dismantling the damaged choukath & Fitting, fixing of dressed & well seasoned Sal wood frame chaukaths for doors, windows, ventilators, by utilising the old salvaged materials from departmental store & making the frame coaltaring two coats to wall side surface & fixing the same at site with required nos. of W.I. clamps of size 250mm. x 40mm. x 4mm. size, grouting in C.C(1:3:6), including cutting grooves in chaukaths jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all labour, all fittings, T&P, all taxes, transportation charges from departmental stores to work site , staging, scaffolding, etc. all complete as directed by E.I.C. (Excluding GST)

Supplying, fitting & fixing of WPC ( Wood Polimer Composite ) solid frame for door , window & Ventilators of required size/ as directed including fitting, fixing with cement concrete , M.S. clamp or using 150mm long anchor bolt with supply of all fittings,transportation charges etc. with supply of all labour, T&P, all taxes etc. complete as per direction of Engineer-in-charge.( Excluding cost of GST). N.B.-Colour & design decided by the department.

Supplying, fitting and fixing of 32mm thick WPC (Wood Polimer Composite) solid doors/ window/ Ventilator shutters of required size with required fittings (T-bolt, hinges, handles, aldrops &screw etc) including cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials,T&P, all taxes, transportation charges, etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) N.B.-Colour & design decided by the department.

Taking out existing Doors/window shutter for necessary repair works and re-fixing the same at proper place by providing all fittings required for the work ( like hinges, handle, T-bolt, screw & aldrops etc.) including supply of all materials, labour, T&P, all taxes, transportation charges etc. all complete as per direction of Engineer-in-charge. (For all Floors) (Excluding GST)

a) For doors

b) For Window

Supplying, fitting and fixing of M.S. grills, fabricated with I.S.A 25 x 25 x 5mm. or 19 x 5mm. M.S flat, welded to approved design, size, fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with supply of all materials, labour, T&P, all taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. complete as per the direction of Engineer-in-charge. ( For all floors). (Excluding GST)

Supplying the following items of approved quality & size including cost & supply of all materials, labour, T&P, all taxes transportation charges etc. all complete as per direction of Engineer-in-charge. (Excluding GST)

a) Masquito Proof Net ( Netlon)

b) Velcro Tape ( Male/female Tape)

C) Staple Pins ( Size 23/8-H.)

Taking mosquito proof net from site store or Supply contractor for stitching by velcro system (male female velcro tape complete) and fixing the new net to proper position as per required size including cost and supply of all materials, labour, T&P, all taxes, transportation, etc. as per direction of Engineer-in-charge. (Excluding GST)

Supplying, fitting, fixing of approved quality 6mm. thick corrugated A.C. sheets in roof including drilling holes in A.C. sheet and windities fixing L:I:J: hooks, windties, bitumen washer cup washer, etc. including cutting the A.C. sheets to required size all lapping etc. complete with cost & supply of all materials, labour, T&P, all taxes ,transportation, staging, scaffolding, etc. complete as per direction of Engineer-in-charge. (Excluding GST)

Providing and laying of water proof plastic felt of 2.25 Kg/Sqm. and 1.5mm. thickness consisting of layers having centre core of 20 microns thermoplastic height molecular high density polyethylene H.M. H.D. P.E film of grade 2504 including priming the surface with bitumen’s prime @0.3 Kg/Sqm. providing a coat of hot blown bitumen of 1.32Kg/Sqm. applying and laying plastic felt membrane with 10Cm. overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2 Kg/Sqm. with supply of all labour, materials, T&P, scaffolding, etc. complete as per the direction of the Engineer-in-charge. (Excluding GST)

Supplying fitting & fixing of salwood choukath with cost and supplyof all materials, T&P,fixturs, all taxes, transportation, etc. complete as per direction of Engineer-in-charge..(Excluding GST). NB: Without painting.

Supplying, fitting & fixing of Factory made 32mm thick Piasal pannel door & window shutter with cost and supply of all materials, labour, T&P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST) NB: Without painting.

Supplying the following materials of approved quality & size including polished body (with ISI mark & specification) with all taxes and transportation charges etc. complete as per direction of Engineer-in-charge. ( Excluding GST)

a) 150mm long S.S. Hinges

b) 100mm long S.S. Hinges

c) 50mm long S.S. Hinges

d) 150mm. Long S.S. Handle

e) 100mm. Long S.S. Handle

f) 150mm. Long S.S tower bolt

g) 250mm. Long S.S tower bolt

h) (15mmX300mm) size S.S. aldrop

i) (35X8) S.S screw Half thread

j) (30X7) S.S screw Half thread

k) (20X6) S.S screw half thread

l) (25X8) G.I full thread screw

m) (20X5) G.I full thread screw

n) Nail of size 4”, 3”, 2”, 2 ½”,1 ½”,1” as per requirement.

o) 3/4X17 size panel pin

p) S.S carriage Bolts with Nut & washer of size (6mmX50mm) (Each Pkt contain 50Pcs.)

Supplying the following materials of approved quality & size including polished body (with ISI mark & specification) with all taxes and transportation charges etc. complete as per direction of Engineer-in-charge. (Excluding GST)

a) Thinner

b) Tarpin

c) Wood primer

d) Enamel Paint of approved Quality and shade

e) Unslaked putty for wood

f) Coltar Paint

g) SpeetexFevicol

h)100mm dia PVC pipe

i) 100mm dia PVC plain Bend

j) 4mm plain/colour/pinhead glass

k) 12mm thick WPC Board

l) 9mm thick WPC Board

m) 6mm thick BWR ply

n) Latex (Synthetic Rubber Emulision)

o) Epoxy Bonding agent

Numbering of Qtrs. with approved colour & shade with specified size of letters etc.all complete as directed by Engineer-in-charge. (Excluding GST)

Supplying the following labours for attending day-to-day departmental maintenance work as and when required etc. all complete as directed by Engineer-in-charge.NB:- The contractor should quote the rates as per the notification published by ministry of labour.

a) Skilled Labour (Carpenter ) 1No.X 300days=300Mandays

b) Un-Skilled Labours (Helper) 1Nos.X300days=300Mandays

M/s.SAI SHREYASI CONSTRUCTION

Hrushikesh Parida

PRAKASH KUMAR SAMAL

M/S BHAIRAB CHARAN SWAIN

Bidyadhar Swain

S.S. CONSTRUCTION CO.

ASSTABHUJA ENGG AND CONSTRUCTIONS

CIS GLOBAL INFRATECH PVT LTD

Aakar Engineers and Contractors

SURYAA CONSTRUCTION