CERTAIN REPAIR TO JOINERY, FLOORING, ROOFING, FALSE CEILING, SANITARY WORK AND OTHER WORK 114 INF BN (TA), 431 (I) ASC SUPPLY DEPOT AND OTM ACCN AT SITE-III AT FATEHGARH CANTT.

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Demolition of cement concrete (unreinforced)of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for 50 mm thickness PCC (1:3:6) type C-1 using 20mm stone aggregate in plinth protection including finishing smooth without using extra cement, all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M&L for coloured chequred cement concrete tiles (25cmx25cmx25mm) thick, set, jointed and pointed in neat cement slurry in floor with white cement and pigment including screed bed of 15mm thick in CM 1:6 including dismantling old existing treatment complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 300x450x8mm thick on vertical surface over 10mm thick rendering in CM (1:4) complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM (1:6) complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in CM (1:6) on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 15mm thick cement plastering in CM (1:4) on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 5mm thick cement plastering in CM 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) complete all as specified and directed.

…..ditto as abov but for exc 1.50sqm but n.exc 4Sqm…ditto…

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in chowkaths, door and door frames, gates of angle frame work etc including purpose made hinges / tower bolt and handle etc. necessary welding etc complete all as specified and directed.

S&F 1.00mm thick Mild steel, plain, black sheet in hearths ; covering to door shutters; covering to door chowkhats ( frames); chullah hoods ; water tanks; water troughs; ducts;urinal troughs and funnels, etc. cut to size , edges beaded if directed, holes punched; including round headed screws , clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams, including bending, turning up, mitred angles, stopped ends, outlets , etc. as required

S & F mild steel flat iron as in hold fast and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

M & L for PCC( 1:3:6) type C1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S&F 2nd class hard wood (Sal) 35 mm thick factory made plain famed, paneled shutter (Two panels) with lock rail and panel of 12mm BWP commercial ply or 12mm veneered particle board with commercial veneering on bath pans. The size of rail and style as per IS –1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick Factory made glazed & skelton shutter of 2nd class H.W (Sal) open rebated and prepare to receive the glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beeds for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks all as specified

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks all as specified

S&F Alum anodized barel tower bolt of extruded sec 200mm long complete all as specified and directed.

S&F Mild steel barrel tower bolts 150mm long, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 150mm long complete all as specified and directed.

S&F Cast iron or malleable cast iron handles 150mm , cast type, stove enamelled black complete all as specified and directed.

S&F but hinges med weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F 300 mm ordinary rat rail made of MS rod pattern spring including roller and roller plate complete all as specified and directed.

Taking up or down steel tubing and connectipons including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connectipons including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) or 15 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) or 20 mm bore of pipe complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.

S&F in repair for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long as spd and fixed in repair complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S & F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed of size 15 mm complete all as specified and directed.

S&F in repair 15mm dia stop valve standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repair 20mm dia stop valve standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed.

S&F in repair PTMT shower rose 125mm size with swivel joint fancy type complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repair 15 mm bore Pillar Taps cast copper aloy with capstan heaes, chromium plated screwed down high presssure with or with out lettered Hot of Cold with long srewed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with eposy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 20mm 210 gms) complete all as specified and directed.

S&F for rotional moulded polyethylene water storage triple layer wall contruction white color tank vertical with closed top of 500ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks complete all as specified and directed.

S & F in repair Grating 125 mm dia with with waste hole of PTMT complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin complete all as specified and directed.

M & L three coat of white wash on new plastered wall surfaces including preparation complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of alkali resistant primer over a coat of chalk whiting including preparation complete all as specified and directed.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation complete all as specified and directed.

M & L three coat of white wash on new plastered Ceiling surfaces including preparation complete all as specified and directed.

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position complete all as specified and directed.

M & L for 2nd class hard wood scantling as in frame work complete all as specified and directed.

Dismentaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

M&L Pre painted zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self taping screw complete all as specified and directed.

Pre-painted zinc coating GI based Plain steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F 6 mm thick asbestos cement plain building boards, fixed to timber frame work with screws on ceiling complete all as specified and directed.

S&F plain fillets clean sawn square, rectangular or triangular, section fixed with nails.(Second class hard wood crass sectional area exc 6 sqcm n.exc 13 sq cm.) complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded complete all as specified and directed.

S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

M/S WASEEM KHAN CONTRACTOR

M/S SRI JAGDAMBE TRADERS