REPAIRS TO FENCING, PATH AND HARDSTANING AT ILP-I, KAREN LINE, BATRA ENCLAVE AND ADJACENT AREA IN AOR OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

M&L for extra for forming fair finish drain channel up to 30 cm inner grith in cement concrete using extra cement complete all as specified and directed

M&L for extra for forming fair finish drain channel inner girth exc 30 cm but n.exc 45 cm in girth in cement concrete using extra cement complete all as specified and directed

M&L for cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and threading, as directed rounded or chamfered on edges complete all as specified and directed

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion and making good disturbed portion complete all as specified and directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed ,drilling holes , notching for wire etc, flat iron fillets (for securing wire mesh etc) top section fixed including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F framed work such as grills, gratings etc, with ends of bars shouldered and /or riveted, or forged into spickes; framed guard bars; barried iron door;ladders;framed balustars; walk ways; railings; framed workof water tans and similar work conforming to Fe 290 Gde-E--165 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 ) and finish smooth & even with using extra cement complete all as specified and directed

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engineer- in -Charge

S&F GI chain link fencing 75 x 75 x 4mm dia, fixed to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc weight per Sqm exceeding 3Kg complete all as specified and directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, n.exc 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for 100mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 75 mm thick cement concrete type C2 , for PCC (1:3:6) (using 40 mm graded stone aggregate) as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of broken stone of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed..

M&L for machine prepolished pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for machine prepolished pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed

M&L for 25 mm thick prepolished chequered cement concrete tiles of approved size,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as per specification.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Excavation in trenches, not exceeding 1.5M wide and not exceeding 1.5M depth for foundation etc and getting out in soft/loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick with soft/loose soil complete all as specified and directed

Removing excavated soils exceeding 250M but not exceeding 500M and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified and directed

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ) , complete all as specified and directed

Restraining resecuring including making good staples etc, galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ) complete all as specified and directed

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/S N B SEN CONSTURCTION

M/S BHATTACHARJEE ENTERPRISE

Jaibalaji Enterprise

ROY ENTERPRISE

M/S SWAPAN KUMAR MONDAL

UNIVERSAL TRADING

M/s sadhan kumar mukherjee

S. D. Construction Co.

SANJAY KUMAR SUPAN

Hooghly Construction Co.