CERTAIN REPAIR/ MAINT INCLUDING PAINTING/ POLISHING TO FURNITURE PERTAINS TO JCO/ ORS UNDER GE (MCTE) MHOW

ALMIRAH MEDIUM STEEL FD-1032 CP Handle : Removing of old unserviceable handles from Almirah medium steel and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed.

Lock : Removing of old unserviceable lock from Almirah medium steel and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed

Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah med steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed

Legs : Removing of old unserviceable leg from Almirah med steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge

All as per Srl item No. 4.00 here-in -before but bottom sheet of Almirah medium steel.

All as per Srl item No. 4.00 here-in -before but shelf of Almirah medium steel.

Removing of old unserviceable butt hinges of Almirah medium steel and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed.

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the almirah (internally & externally complete)

BED HARD STEEL FD/E6/MAP/08 (R) Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed.

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed.

All as per Srl item No. 23.00 here-in-before but foot board of Bed hard.

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed.

Welding to broken joints of bed hard complete all as specified and directed.

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the bed hard steel complete all as specified and directed.

CHAIR SCHOOL WITH HAND BOARD : FD/E6/MAP/05 Removing old/ unservicable one piece PVC seat & back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size shown in drawing complete all as specified and directed.

Removing old/ unservicable hand board top from chair school with hand board and S & F new top of 17/18mm thick MDF board of colour/ shade as approved by Engr-in-Charge with PVC edging and screw to 25mm hollow steel pipe inserted in 20mm as per shape and size shown in drawing complete all as specified and directed.

Welding to broken joints of Chair school with hand board complete all as specified and directed.

S&F in replacement PVC shoes to Chair school with hand board complete all as shown on drg complete all as specified and directed.

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the chair complete all as specified and directed.

Chair Dining FD-203/228/279/1105 M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed.

All as per Srl item No 21.00 above but front leg complete all as specified and directed.

All as per Srl item No 21.00 above but side rail complete all as specified and directed.

All as per Srl item No 21.00 above front/ back rail complete all as specified and directed.

All as per Srl item No 21.00 above but stiffner complete all as specified and directed.

All as per Srl item No 21.00 above but back strip support complete all as specified and directed.

S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

Chair Dining ORs (MAP) FD/MAP-II/04 M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed.

All as per Srl item No 29.00 above but front leg complete all as specified and directed.

All as per Srl item No 29.00 above but side rail complete all as specified and directed.

All as per Srl item No 29.00 above front/ back rail complete all as specified and directed.

All as per Srl item No 29.00 above but stiffner complete all as specified and directed.

All as per Srl item No 29.00 above but back strip complete all as specified and directed.

S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge.

Removing of old unsv/ troneout PVC seats from chairs and S&F new PVC seat complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

Chair Writing - FD-20 (M)/202/250/280 M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed.

All as per Srl item No 38.00 above but front leg complete all as specified and directed.

All as per Srl item No 38.00 above but side rail complete all as specified and directed.

All as per Srl item No 38.00 above front/ back rail complete all as specified and directed.

All as per Srl item No 38.00 above but back strip complete all as specified and directed.

All as per Srl item No 38.00 above but arm rest complete all as specified and directed.

All as per Srl item No 38.00 above but stiffner complete all as specified and directed.

S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.

Chair Easy - FD-229 M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed.

All as per Srl item No 47.00 above but front leg complete all as specified and directed.

All as per Srl item No 47.00 above but side rail complete all as specified and directed.

All as per Srl item No 47.00 above front/ back rail complete all as specified and directed.

All as per Srl item No 47.00 above but side rail of back frame complete all as specified and directed.

All as per Srl item No 47.00 above but top or bottom rail of back frame complete all as specified and directed.

All as per Srl item No 47.00 above but replacement of arm rest complete all as specified and directed.

S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.

Removing of broken/ damaged plastic cane from Chair dining (Drg No FD-203/228/279/1105) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as specified and directed.

Removing of broken/ damaged plastic cane from Chair Easy (Drg No FD-229) with new white plastic cane 02 mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as specified and directed.

Removing of broken/ damaged plastic cane from Chair Writing (Drg No FD-20 (M)/202/250/280) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as specified and directed.

CHAIR VERANDAH : FD-359 & 256 Cutting and removing of old cane from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge.

Welding to broken joints of Chair varandah complete all as specified and directed.

S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed.

CHAIR VERANDAH MAP FD/MAP-II/06, FD/MAP-II/15 Cutting and removing of old/ unsv PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge.

Welding to broken joints of Chair varandah complete all as specified and directed.

S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed.

CHARPOY IP FOLDING WITH HARD TOP FD-388 (R) Removing of old unserviceable ply wood from charpoy IP folding and S&F new 08mm thick BWR plywood with unpolished edging (ISI marked) of suitable size of approved quality in two pieces fixed with suitable screw steel on top complete all as specified and directed.

Welding to broken joints of charpoy IP folding complete all as specified and directed.

S&F in replacement hard rubber/ PVCshoes at the bottom of Charpoy IP folding all as shown on drg complete all as specified and directed.

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the charpoi IP folding.

CHARPOY WITH HARD TOP : FD/MAP-II/01 Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12mm thick plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as shown on drawing and as directed.

Welding to broken joints of Charpoy with hard top complete all as specified and directed.

S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown on drg complete all as specified and directed.

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the charpoi with hard top complete all as specified and directed.

BED HARD STEEL JCOs CWE/M/TP/06/07 Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed.

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed.

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed.

Welding to broken joints of bed hard complete all as specified and directed.

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the bed hard steel complete all as specified and directed.

BED PLY TOP FD -246 & 247 Removing of old unserviseable plywood top from Bed ply top and S&F new top of same size of 12mm thick ply wood (ISI marked), BWR grade of appropriate size with screws complete all as shown on drawing and as directed.

Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980mm x 90mm x 35mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and directed.

All as per Srl item No. 79.00 here-in-before but short rail of size 60mm x 60mm of suitable length complete all as specified and directed.

All as per Srl item No. 79.00 here-in-before but stiffener of size 60mm x 60mm of suitable length complete all as specified and directed.

Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per Srl item No. 82.00 here-in-before but foot rest complete all as specified and directed.

Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04mm thick one side teak faced plywood and teak wood beading 04mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same all as shown on drawing.

All as per Srl item No. 84.00 here-in-before but foot rest complete all as specified and directed.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

PEG TABLE FD-277 Removing of old unserviceable top from peg table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed.

Replacement of old unserviceable leg from existing peg table and S&F the same size new leg made out of 1st class hard wood teak to Peg table duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 88.00 here-in-before but long top rail, complete all as specified and directed.

All as per Srl item No. 88.00 here-in-before but short/ bottom rail, complete all as specified and directed.

All as per Srl item No. 88.00 here-in-before but stiffener of Peg table, complete all as specified and directed.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.

RACK SHOE STEEL FD/E6/MAP/02 (R) Welding to broken joints of Rack Shoe steel complete all as specified and directed.

S&F in replacement hard rubber/ PVC shoes at the bottom of Rack shoe steel all as shown on drg complete all as specified and directed.

Removing of old/ unserviceable Jali (Shelf) from existing Rack Shoes steel and S&F new Jali (Shelf) duly black painted to Rack shoe steel complete all as shown on drawing complete all as specified and directed

M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the shoe rack steel.

TABLE BEDSIDE (FD/E6/MAP/15(R) and relevent drgs) M&L for replacement of existing unserviceable Top of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as specified and directed.

M&L for replacement of back side of Table bedside made out of 06mm thick BWR plywood commercial best quality, complete all as specified and directed.

M&L for replacement of upper drawer of Table bedside made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage.

M&L for replacement of bottom drawer of Table bedside wtih new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as specified and directed.

M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE shoe, complete all as specified and directed.

M&L for replacement of existing unserviceable sides of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed.

S&F in repairs telescopic chennel of 10'' size shall be provided for smooth functioning of drawers of table bedside as per drg and as directed by Engr-in-Charge.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.(For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table bedside steel. (For Steel Surfaces).

TABLE CENTER FD-274 Removing of old unserviceable top from Table Center and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed

Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to table centre duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 106.00 here-in-before but long rail, complete all as specified and directed.

All as per Srl item No. 106.00 here-in-before but short rail, complete all as specified and directed.

All as per Srl item No. 106.00 here-in-before but stiffener of table centre, complete all as specified and directed.

M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.

TABLE DINING 4 PERSONS [FD/MAP Series] Removing of old unserviceable top from table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed for table dining 4 persons

All as per Srl item No. 111.00 above but S&F new leg made of 1st class hard wood

All as per Srl item No. 111.00 above but for Table dining 4 pers

All as per Srl item No. 111.00 above but short rail complete all as specified and directed.

All as per Srl item No. 111.00 above but support stiffner complete all as specified and directed.

S&F new bracket of size 100 x 100 x 30mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as specified and directed by Engr-in-charge

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR MAP Removing the existing unserviceable sides and supply & fix new left side made of 18mm MDF board bonded with phenol formaldehyde resin, exterior grade-II both side teak colour as shown on drgs and directed by Engr-in-charge.

Removing the existing unserviceable hinges and supply & fix new Piano type hinges of stainless steel all as shwn on drgs and as directed by Engr-in-charge.

Removing the unserviceable mirror and supply & fix new mirror of 5mm thick all as specified and shown on drgs.

Removing the existing unserviceable glass shelf and supply & fix new glass shelf of 5.0mm thick all as shwn on drgs and as directed.

Removing the existing unserviceable/ broken complete magnetic catcher set and supply & fix new complete magnetic catcher set all as shown & specified on drgs and as directed by Engr-in-charge.

Removing the existing unserviceable back side of mirror and S&F new back side made of 6mm commercial plywood all as shwn on drgs and as directed.

Removing the existing unserviceable back side of cabinet and S & F new back side made of 12mm commercial plywood all as shwn on drgs and as directed. Note : Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of table dressing gents with mirror.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.

TABLE DRESSING LADIES (FD/MAP-II/07) M&L for replacement of broken/ damaged mirror including frame of Table dressing ladies with new one mirror of 05mm thick of size as shown on drg of approved quality fixed to wooden frame, complete all as directed by Engineer in charge.

M&L for replacement of back side of mirror of Table dressing ladies made out of 06mm thick BWR plywood commercial for frame of best quality, complete all as specified and directed.

M&L for replacement of hard wood support member of size 45 x 35 x 1520mm for mounting mirror of Table dressing ladies made out of teak wood of best quality, complete all as specified and directed.

M&L for replacement of existing unserviceable Top of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as specified and directed.

M&L for replacement of drawer of Table dressing ladies made out of out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage.

M&L for replacement of existing unserviceable shutter of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round, providing one CP Handle of best quality complete all as specified and directed.

M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE DRESSING LADIES with GI screw, complete all as specified and directed.

M&L for replacement of existing unserviceable sides of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed.

M&L for replacement of existing unserviceable back of the box of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed.

M&L for replacement of existing unserviceable bottom of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed.

M&L for replacement of existing unserviceable magnetic catcher with new one of best quality complete all as specified and directed.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR - FD-230 Removing of old unserviceable looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing complete all as specified and directed.

Removing old broken/ unserviceable sunmica from the top of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/ unserviceable sunmica from the drawer of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/ unserviceable knob from table dressing gents and S&F new 40mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

TABLE 900 x 600mm with/ without drawer FD-223/224/283/284 Removing of old unserviceable top from Table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make : Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed.

All as per Srl item No. 143.00 above but leg made out of 1st class hard wood

All as per Srl item No. 143.00 above but replacement of long rail

All as per Srl item No. 143.00 above but replacement of short rail

All as per Srl item No. 143.00 above but replacement of drawer with fittings

All as per Srl item No. 143.00 above but replacement of bottom centre stiffner

All as per Srl item No. 143.00 above but replacement of bottom side stiffner

S&F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge.

M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed.

Please Enable Macros to View BoQ information