Construction of Lift Shaft for 2 Nos of Lift in Old Design Building and 1 No of Lift in SIL Building at RWRDC HAL DC

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Construction of Lift Shaft for 2 Nos of Lift in Old Design Building and 1 No of Lift in SIL Building at RWRDC, HAL [DC]. CONTRACT NO. HAL/FMD/C-111/25-26

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

1 Demolishing brick work in cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 24.00 Cu m 2004.57 Rupees Two Thousand Four and Fifty Seven Paise Only 48109.68

2 Demolishing Nominal mix cement concrete 1:4:8 or leaner mix including equivalent design mix / brick bat surkhi manually / by mechanical means including disposal of material, etc., all complete as directed by Engineer-in-Charge. 9.00 Cu m 1463.00 Rupees One Thousand Four Hundred Sixty Three Only 13167.00

3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 10.00 Cu m 3455.37 Rupees Three Thousand Four Hundred Fifty Five and Thirty Seven Paise Only 34553.70

4 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50 metres lead of area 3 Sq metres and below, etc., all complete as directed by Engineer-in-Charge. 21.00 Nos 357.29 Rupees Three Hundred Fifty Seven and Twenty Nine Paise Only 7503.09

5 Removing and refixing the existing Aluminium partition for renovation works including removing the partition with doors, Fittings etc., and refixing the same including cutting the glass, boards if necessary to match with the tile flooring, etc., all complete as directed by Engineer-in-Charge. 75.00 Sq m 211.86 Rupees Two Hundred Eleven and Eighty Six Paise Only 15889.50

6 Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.50m, etc., all complete as directed by Engineer-in-Charge. 65.00 Cu m 172.71 Rupees One Hundred Seventy Two and Seventy One Paise Only 11226.15

7 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30 cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift from 1.50m to 3m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 38.00 Cu m 296.08 Rupees Two Hundred Ninety Six and Eight Paise Only 11251.04

8 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.50m, etc., all complete as directed by Engineer-in-Charge. 30.00 Cu m 190.71 Rupees One Hundred Ninety and Seventy One Paise Only 5721.30

9 Disposal of Moorum / building rubbish/ Malba / similar unsersiable, dismantled or waste material by mechanical transport including loading, transporting, uploading to approved municipal dumping ground for lead upto 10km for all lifts, etc., all complete as directed by Engineer-in-Charge. 50.00 Cu m 480.76 Rupees Four Hundred Eighty and Seventy Six Paise Only 24038.00

10 Providing and laying in position 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size for bed concrete in manholes, chambers, etc., all complete as directed by Engineer-in-Charge. 9.00 Cu m 6628.08 Rupees Six Thousand Six Hundred Twenty Eight and Eight Paise Only 59652.72

11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge. 10.00 Cu m 7665.78 Rupees Seven Thousand Six Hundred Sixty Five and Seventy Eight Paise Only 76657.80

12 Providing and laying in position ready mixed cement concrete M25 grade for plain cement concrete work;using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS:9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength including bonding the existing concrete with bonding chemicals pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the Engineer-in-Charge; for the following grades of concrete.

a All works up to plinth level 23.00 Cu m 9248.12 Rupees Nine Thousand Two Hundred Forty Eight and Twelve Paise Only 212706.76

b All works above plinth up to floor V level 61.00 Cu m 9594.17 Rupees Nine Thousand Five Hundred Ninety Four and Seventeen Paise Only 585244.37

13 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth, etc., all complete as directed by Engineer-in-Charge. 22.00 Sq m 729.07 Rupees Seven Hundred Twenty Nine and Seven Paise Only 16039.54

14 Burnt Brick masonry in CM 1:6 with, table moulded bricks of class designation 7.5 in all shapes and sizes for chambers, drains, wall partitions, etc., all complete as directed by Engineer-in-Charge. 59.00 Cu m 8860.09 Rupees Eight Thousand Eight Hundred Sixty and Nine Paise Only 522745.31

15 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand), etc., all complete as directed by Engineer-in-Charge. 85.00 Sq m 1119.44 Rupees One Thousand One Hundred Nineteen and Forty Four Paise Only 95152.40

16 Centering and shuttering including strutting, propping etc. and removal of form work complete as per direction of Engineer in Charge for :

a) Foundations, footings, bases of columns, etc., for mass concrete 75.00 Sq m 381.56 Rupees Three Hundred Eighty One and Fifty Six Paise Only 28617.00

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses, etc., 85.00 Sq m 819.75 Rupees Eight Hundred Nineteen and Seventy Five Paise Only 69678.75

c) Suspended floors, roofs, landings, balconies and access platform 130.00 Sq m 902.21 Rupees Nine Hundred Two and Twenty One Paise Only 117287.30

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers 240.00 Sq m 716.52 Rupees Seven Hundred Sixteen and Fifty Two Paise Only 171964.80

e) Columns, Pillars, Piers, Abutments, Posts and Struts 165.00 Sq m 935.34 Rupees Nine Hundred Thirty Five and Thirty Four Paise Only 154331.10

17 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding / welding to existing reinforcement all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more, etc., all complete as directed by Engineer-in-Charge. 13300.00 Kgs 104.94 Rupees One Hundred Four and Ninety Four Paise Only 1395702.00

18 Providing and fixing factory made uPVC glazed / whiteThree track three panels sliding window with two glazed and one wire meshed panel with aluminum channel for roller track, wool pile, nylon rollers with SS 304 body using comprising of lead free uPVC multi-chambered frame, sash and mullion extruded profiles duly reinforced having minimum wall thickness of 1.70mm for with minimum frame [98 x 40]mm & both glazed and fly screen sash of mimimun [30 x 55]mm with zinc alloy (Zamak) powder coated handle on every glazed panel along with multi-point locking system (Height upto 1.80m) of profiles confirming to EN:12608 in any shape,colour and design duly reinforced with galvanised mild steel section made of required shape & size as per CPWD specification, including uPVC extruded glazing beads, interlocks and inline sash adopter(where ever required) of appropriate dimension, EPDM, gasket, hardware, stainless steel (SS 304 grade) fasteners of minimum 8mm dia with counter sink head, comprising of matching polymide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 :Part 1 to 14 size for plastic packers, plastic caps and necessary stainless steel screws, etc., Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware's and drainage of water, etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, etc., all complete as per approved drawing & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by EIC. 2.00 Sq m 10580.60 Rupees Ten Thousand Five Hundred Eighty and Sixty Paise Only 21161.20

19 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, etc., all complete as directed by Engineer-in-Charge. 15.00 Cu m 1469.04 Rupees One Thousand Four Hundred Sixty Nine and Four Paise Only 22035.60

20 Providing and laying Polished Granite stone in flooring, in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, cutting holes for fixing wash basin, nosing and polishing, etc., all complete as directed by Engineer-in-Charge. 125.00 Sq m 4360.30 Rupees Four Thousand Three Hundred Sixty and Thirty Paise Only 545037.50

21 Plastering in cement mortar 1:6 (1 cement : 6 fine sand) 15mm thick to brick work or concrete surfaces finished smooth with neeru finish for internal surfaces and fair finish for external surface including scaffolding, curing, etc., all complete as directed by Engineer-in-Charge. 510.00 Sq m 384.68 Rupees Three Hundred Eighty Four and Sixty Eight Paise Only 196186.80

22 Plastering in cement mortar 1:4 (1 cement : 4 fine sand) 12mm thick to Concrete surface and roof terrace finished smooth with neeru finish including scaffolding, curing, etc., all complete as directed by the Engineer-in-Charge. 550.00 Sq m 337.68 Rupees Three Hundred Thirty Seven and Sixty Eight Paise Only 185724.00

23 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge. 510.00 Sq m 362.73 Rupees Three Hundred Sixty Two and Seventy Three Paise Only 184992.30

24 Painting / Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt esistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre / 10Sq m. Over and including priming coat of exterior primer applied @ 0.90 litre / 10Sq m, etc., all complete as directed by Engineer-in-Charge. 540.00 Sq m 176.36 Rupees One Hundred Seventy Six and Thirty Six Paise Only 95234.40

25 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats to MS Grill work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, etc., all complete as directed by Engineer-in-Charge. 40.00 Sq m 220.14 Rupees Two Hundred Twenty and Fourteen Paise Only 8805.60

26 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, Single socketed pipes -110mm diameter, etc., all complete as directed by Engineer-in-Charge. 50.00 R m 367.21 Rupees Three Hundred Sixty Seven and Twenty One Paise Only 18360.50

27 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre / Sq m by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg / litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints, etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 60.00 Sq m 522.94 Rupees Five Hundred Twenty Two and Ninety Four Paise Only 31376.40

28 Providing Structural steel work riveted, plate, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing anger bolt, connecting plate, base plate, etc., in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 370.00 Kgs 130.09 Rupees One Hundred Thirty and Nine Paise Only 48133.30

Sub-Total (Excluding GST) Rupees Fifty Lakh Thirty Four Thousand Two Hundred Eighty Six and Ninety One Paise Only 5034286.91

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 5034286.91 BELOW % 5034286.91

Add 18% GST Rupees Nine Lakh Six Thousand One Hundred Seventy One and Sixty Four Paise Only 906171.64

Grand Total (Including GST) Rupees Fifty Nine Lakh Forty Thousand Four Hundred Fifty Eight and Fifty Five Paise Only 5940458.55

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-111/25-26

Name of Work: Construction of Lift Shaft for 2 Nos of Lift in Old Design Building and 1 No of Lift in SIL Building at RWRDC, HAL [DC].

Estimated Amount in Rs.: 5940000

Tender Notice Date : 13.01.2026

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 2 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2024-25 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2023- 2024 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 1782000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 2376000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II