PROVN OF GUARD ROOM AND MT PARKING SHED FOR VEHICLE AT DIFFERENT LOCATIONS OF AGE BR P UNDER GE 861 EWS

Amount

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, base for columns, etc basements slabs under rammed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded stone aggregate in Column, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded stone aggregate as in Beams cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finish surface of concrete square, rectangular or polygonal complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, haunching , lintels, cantilevers shelve including supports overhangs etc also splays between floors and beams, etc complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed.

M & L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securining with clip all as specified.

M&L for walling of random rubble uncoursed,well bonded,beded and solidly hearted built in CM 1:4 complete all as specified and directed.

S&F Stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc of Fe-410-W(Gde-E-250 quality-A) (framed) etc,complete all as specified and directed.

S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl distance pieces cleats etc complete all as specified and directed.

S&F Steel work in tublar trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S. 1161-1979 grade St-240 complete all as specified and directed.

M&L black bituminous paint (Each Coat) for surfaces of any description wood,steel,iron,concrete,brick,stone,etc.,exceeding 10cm In width or girth all as specified and directed.

S&F galvalume aluminum zinc coating Pre-painted GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F galvalume aluminum zinc coating Pre-painted GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed

M&L 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm but bull nosed splayed chamfered or rounded on one edge or face complete all as specified and directed.

M&L brick work with old size sub class B brick straight or curved on plan exc 6 m mean radius built in cement mortar in CM 1:6 complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L preparation of new plaster surface of walls and applying two coat of cement base paint camouflage pattern complete all as specified and directed.

M&L preparation of newly plaster surface and applying two coat of distemper oil emulsion white tinted complete all as specified and directed by Engr -in - charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, as per specification, complete all as specified and directed by Engr-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed.

M&L for PCC 75 mm thick type C2 , 1 : 3 : 6 using ( 40mm graded aggregate ) as in sub base of floor/ pathway complete all as specified and directed.

M&L hard core of broken stone boulders of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick (Square/rectangular light shade polished area of each tiles not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match 15mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge and approved by GE.

S&F Glazed ceramic tiles (coloured tiles) in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified and directed.

PCC (1:2:4) type B-0 (Using 12.5 mm graded aggregates), as in flooring 25 mm thick, complete all as specified and directed

S&F 2nd Class Hard wood plain, solid, straight chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 2nd class hard wood plain framed pannel shutters (any number of pannels) with pannels of timber flat on boht sides(feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face vaneers 35mm thick,complete all as specified and directed by Engr-in -Charge

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc size of members of window/ventilator shutter etc are provide with style and rails as specified in SSR Part I, Section 8, clause 8.24 (b);fitted to chowkat, complete all as spd.

M&L for preparation of new steel and iron surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for painting two coat synthetic enamel paint over a pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L chequered cement concrete tiles 20cmx20cmx25mm thick , with grey cement any pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 75 mm thick type C2, 1:3:6 using (20 mm graded aggregate ) as in plinth protection path finished even and smooth without using extra cement complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 100mm long complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 75mm long complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section of 150mm length complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section of 125mm length complete all as specified and directed.

S&F aluminum handle150 mm size, cast type, anodized complete all as specified and directed.

S&F aluminum handle125 mm size, cast type, anodized complete all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolt size 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as spd

S&F vitreous china squatting pan, ORISSA pattern size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC low level flushing cistern (white 10 Ltr capacity with internal fitting push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 15 mm bore complete all as specified and directed.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 20mm bore complete all as specified and directed.

S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore, bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Fancy type corner Glass shelf of size 200mmx 200mm x5.5mm thick glass with CP Railing complete all as specified.

S&F tubular towel rail, aluminium anodised 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F CP brass soap dish complete all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints fixed to wall & floor complete all as specified and directed.

S&F PVC bend 110 mm bore complete all as specified and directed.

S&F PVC bend 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) reducers 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 1000 liters 20 mm bore brass valves high pressure, with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified in SSR Part- I and directed.

S&F 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L precast concrete type B1, 1: 2: 4 (20 mm graded aggregate) as in manhole covers slab set in CM 1:4 complete all as specified and directed.

M&L PCC type C2 1:3:6 (40 mm graded aggregate) in surface channels and drain complete all as specified and directed.

Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fiber reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 25 users complete all as specified and directed. Drg No CESZ/TD-01/2015 Sheet 1/3, 2/3

Construction of soakage well for users, excavation in ordinary soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber chamber screen chamber, brick work CM 1: 4, RCC cover slab in M-25/ RR masonry filling with brick bats, complete of size 1.20m dia 3.0 m deep as shown in drg complete all as specified and directed by Engr-in-Charge. Drg No CESZ/TD-01/2015 Sheet 3/3

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC cassing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item No 78 here-in-before but for one socket outlet 3 pin 5 Amp on independent board.

All as per item No 78 here-in-before but for one socket outlet 3 pin 5 Amp on same board .

All as per item No 78 here in before but cable of size 2.5 Sqmm for one socket outlet 5/6 pin 15 Amps on independent board with 2.5 sqmm earth continuity conductor.

S & F switch piano flush type 5/ 6 Amps, 240 volts single pole one way complete all as specified & directed.

S & F switch socket combination 5 pin 5 Amps, flush type multipurpose complete all as specified and directed.

S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified & directed.

S & F ceiling rose, surface bakelite, 65 x 50mm, two to three terminals complete all as specified & directed.

S&F decorative ultra slim linear LED 18 Watt 4' long lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible two core cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete core twisted flexible copper conductor cable with suitable size LED tube all as specified & directed. Make :- Havels /Philips,/Surya

S&F steped type electronic fan regulator flush type on the existing sheet etc AC 230 volts,duly ISI marked with and including connector complete all as specified.

Supply & fixing sheet metal enclosure for DB double door IP 43 single pole & neutral 240 volt 8 way with suitable size bus bar and natural link fixed in flushed in wall incl chasses of wall suitable for housing MCB etc complete all as specified & directed.

S&F MCB single pole 6 to 32 Amps 240 volts with all incoming / outgoing connections with proper size lugs complete all as specified & directed.

S&F MCB single pole and neutral 6 to 32 Amps 240 volts with all incoming / outgoing connections with proper size lugs complete all as specified & directed.

Supplying and fixing LED bulk head fitting 9 W in engineering plastic housing with clear prismatic diffuser, including LED lamp and all accessories for fixing on wall all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 meter long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

S&F Sheathed heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm nominal cross section, 2 core for service wire pole or passing through pipes including all necessary clamps nuts, bolts and washers complete all as specified.

S&F lamp holder (Angular/Straight),insulated body ,with back plate for batten fittimgs including LED lamp 10 Watt complete all as specified.

S&F of ceiling fan 1200mm sweep copper winding,double ball bearing with aluminium blade set of 3 ,length of down rod not less than 300mm single phase ,240 volts ISI marked including connection wire three core etc complete all as specified.

S&F ceiling fan hook made of 16mm dia mild steel iron bar in PCC roof/truss/frame including 20mm iron down bar 60cm long complete all as specified.

S&F exhaust fan 230 to 250mm sweep PVC body with louver,240 voltsAC single phase ,50Hz,ISI marked including necessary work in wall/sheet ,including cutting hole in wll/sheet etc,connection cable ,nut bolt and other fixing materials complete all as specified.

M/S ASHAQ CONSTRUCTION

M/S Sofi Brothers

JANDOO AND CO.

M/S Ghulam Hussain Lone

M/S RASHID CONSTRUCTION

Javeed And Co

FIRDOUS AHMAD BABA