SPECIAL REPAIR TO HARD STANDING AND WINDOWS, CHAJJAS OF BLDG NO P-160F AND SPECIAL REPAIRS TO ROOF AND MANGLORE PATTERN TILES OF BLDG NO P-28 AT INS SHIVAJI LONAVLA AND CERTAIN REVENUE AND MINOR WORKS AT AIR FORCE STATION LONAVLA

Amount

Demolition of PCC of any description and in any position not otherwise specifically provided for(un-rainforcement ) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specifed and directed. .

Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface

M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

25MM Thick cement concrete type B-0, 1:2:4(12.5mm graded aggregate) as in floor base complete all as specified and directed.

M&L for chequered cement concrete with glossy finish tiles with grey cement and pigments 30cm x 30cm x 22mm thick set and jointed in neat cement slurry in floors over and including 20mm screed bed in CM (1:6) complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 30mm thick crushed stone sand layer complete all as specified and as directed.

M&L cement filleting in CM 1:4, sectional area n.exc 25 sq cm complete all as specifed and directed

Brick work with sub class 'B', old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness bedded and pointed in cement mortar complete all as specified and directed.

M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 15mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Rendering 10 mm thick in CM (1:3) as in backing coat of cement plaster for laying of wall tiles/stone complete all as specified and directed.

M&L for cement sand plaster in 2 coats 12mm and 8mm thick over the brick work in 1:4 cement sand mix admixes with integral waterproofing compound @ dosage of 200 MI per Bag of cement with a rough finish to receive finishes etc it etc complete.

Preparing new plastered external surface of wall and applying 2 Coats of Acrylic elastomeric exterior waterproof coating (Dr. Fixit Raincoat or of equivalent make mentioned in list of manufacturers herein after) with extra coat on rain lashed walls, dead walls, projections & Parapet wall top on primed surface with Efflorescence resistant penetrating primer (Dr. Fixit Primeseal or of equivalent make mentioned in list of manufacturers herein after) diluted with 50% water. Work shall be executed by engaging the approved applicator of the manufacturer and as approved by GE.

Dismantling of AC (corrugated, semi corrugated) sheets in roof/chajja etc complete all as specified and directed

Dismantling steel work including doors, gates , structural steel work in roof work and any other specification etc.

S&F Steel work in tubular roof trusses as in main post, vertical member etc including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St-240 & steel painted one shop workshop before fabrication complete all as specified.

S&F Roof trusses (framed), sunshade frames, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W(Gde-E-250) all as specified and directed

Plates (plain or chequered ) channels , square cut or notched (ordinary and counter sunk) forming holes, without any attachement.

S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for Pre- Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F framed work as in doors or gate of angle or other section with gusset plates,rails, braces etc complete drilled for fixing of steel sheeting or other covering . Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering , running rails and guides and hanging also fastening and fixing (Fe 410-W Gde -E-250 Quality B)complete all as specified and directed.

Dismantling Mangalore pattern roofing tiles single layer including ridge tiles.

Dismantling battens for tiles any size exceeding 15cm in spacing.

Dismantling wooden fillets in rafter purlins etc unframed work under 40 sq cm in sections.

Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc.

Dismantling boarding any description fixed in any position fixed with nails.

Dismantling framed work timber scantling 40 sq cm and over in section , in any position complete all as specified.

S&F 0.60mm thick corrugated galvanised mild steel sheeting with zinc coating of 120 gram/SqM, grade 'O' with two corrugation side lap, with corrugation of grade 'B' 12.5mm depth fixed with 'L' type or 'J' type or cranked hook bolts and washers in roofs, walls etc.

S&F 1.00 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with zinc coating 120 gram/SqM grade 'O'. Note :- Plain area will be measured for payments irrespective of curve/velly

S/F Tubular sections of size 50 x 25 x 2.6mm thick as in rafters fixed with self tapping screw of size not less than 75mm and 25 x 25 x 2.6 mm thick for battens fixed on rafter over CGI sheet roof with necessary fittings and welding for supporting mangalore pattern roof tiles complete.

M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry

All as per item No-34 here-in-before but except tile complete all as specified and directed.

M&L ridge or hip tiles to suit Mangalore pattern roofing tiles bedded and jointed in CM 1:6 using class 'AA' tiles.

S&F 2nd class hard wood boarding fixed with nails planned one side with butt joint 20mm thick.

M&L cement filleting in CM 1:3 in roof sectional area n.exc 25 sqm

M&L two coats of synthetic enamel painting over one coat of pink primer on wooden surfaces exceeding 10 cm width or girth including preparation of new surfaces.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Rendering in CM (1:6) 15mm thick on fair faces of brick work or stone surfaces finished even and smooth in patches (without using extra lime or cement) and finish the surface with 3mm thick wall care putty

Rendering in cement mortar 1:4 15mm thick (10mm as doubing coat and 5mm in finishing coat using water proofing compound on brick/ stone surfaces finished fair and even without using extra cement etc complete all as specified and directed.Note : Water proofing compound and will be measured and paid separately.

Supply only integral water proofing compound.

M&L for preparation of new plastered surface of wall and applying Two coat of oil bound diatemper over the alkali resistance priming paint primer over 3mm thick wall care putty complete all as specified and as directed.

Preparing newly plastered surfaces of walls & applying two coats of antifugal acrylic base exterior weather proof paint over a coat of primer on external surfaces of wall all as specified and directed

Excavating post holes or similar holes, each not exceeding 0.50 Cu. M, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 100m & making good surface complete all as specified and directed.

Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F MS steel work in rolled/ tubular trusses (framed), purlines,rafters etc, complete including nessary cutting, welding,fabrication and eraction Machine hydraulic bending etc complete using ERW pipes or indution butt welded tubes,confirming to IS 1161-1979 (Gde E-250) quality-A, complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specifed and directed

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point

Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames), exc 1.50 sqm but not exc 4.0 sqm each complete as directed

Taking down shutters of any description, exc 1 Sqm and n.exc 2 sqm each including dismantling of the guard bar/ grill etc complete all as specified and directed

Taking down steel/aluminium windows/ventilator complete with frames and shutters (without taking off the shutters) of area exc 1.5 sqm and not exc 4.00 sqm complete all as specified and as directed.

Taking down steel/aluminium windows/ventilator complete with frames and shutters (without taking off the shutters) of area not exc 1.5 sqm complete all as specified and as directed.

M&L for IInd class Hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed.

S & F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, with commercial face veneers etc complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.

S&F for 30 mm Factory made Moulded door shutter - Wood free consisting of frame made out of M.S. tube of 19 gauge thickness and size of 25 mm X 25 mm for stiles, top and bottom rails M.S. frame shall have a coat of steel primer. The inner panel shall consist of 25 mm thick High density EPSconforming to IS 4671-1984 bondedwith 2 mm termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side of the EPS. The edge of the panel is to be sealed with lipping of 10mm wide PVC sheet baton (made by sticking 2 nos , PVC sheets of 5 mmt thickness using PVC solvent cement ) and stile sides 25 mm (5mm x 5)thick and 30mm wide PVC sheet fitted along M.S tube for lock provision & for lock height 5 mm thick PVC sheet of 150 mm x 100 mm fixed with upper & lower face of inner side of EPS panel and manufacturer's specification & drawing etc, complete all as specified and directed.

Supply and fix aluminium alloy anodised Aldrop sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 300 mm fixed at any position all as specified and directed.

S&F in stainless steel butt hinges, 100mm, medium weight complete all as specified and directed

S&F in extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed.

S&F in aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed.

S&F machine cut and machine polished, green marble, 18-20mm thick in single piece as in double stepping on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including backing coat of rendering 10 mm thick in CM 1:4 all as specified and directed.

M&L for powder coated aluminium three track and three shutter (of equal width) sliding type window without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings two No's for each shutter with 4.00mm thick sheet glass for glazing shutters & stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm for wire gauge shutters including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20620. (ii) Frame (Top & Side)-20621. (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with three shutters of equal width. (ii) Two shutters shall be glazed shutters & one shutter shall be with stainless steel wire cloth all as specified hereinbefore. (iii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window and at time the same can be utilized as partly glazed and partly gauzed window. (iv) The thickness of powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (v) Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Unit rate quoted shall be deconed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

M/L for rendering 10 mm thick in CM 1:6 on brick walls septic tank and man hole external surface finishing even and smooth (with out using extra cement)etc complete all as specified and directed by EIC.

M&L for powder coated aluminium two track, two shutters (of equal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) & 4.00mm thick plain glass for glazing with & including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20956 (ii) Frame (Top & Side)-20966 (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with two shutters of equal width. (ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (iv) Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

Provide cement concrete of 1:2:4 (20mm graded aggregate) type B1 for making concrete blocks and coping etc.

S&F Mild steel work of Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165 (Brackets over 10 kg each to be measured under ‘Structural Steel')

Demolition of cement concrete in ground floor and paving n exe 15cm thickness (below or above ground level)

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete.

M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed.

M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed.

M&L for complete removal of existing treatment and applying old plastered surfaces of walls,Pillars, cornices etc and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including wherever necessary filling of nail holes/inequalities with white cement based wall care putty for smooth finish.etc complete all as specified and directed.

M/s S.D Construction Co

VIJAYA ENTERPRISES

RK AND SONS CREATION

M/s KAILASH CHANDRA