Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹31.2 L+₹2.5 L (8.76%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹32.9 L+₹4.2 L (14.6%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
31 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
BAIRAGARH BHOPAL
COMPREHENSIVE REPAIR MAINT OF SCC 11 MAHAR AND OTHER MINOR UNITS AT SI LINES AREA UNDER GE BHOPAL
2023_MES_603583_1
8994/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹80,000
Yes
8 Sept 2023
15 Jun 2023
2 Aug 2023
15 Jun 2023
31 Jul 2023
17 Jul 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutters of any descripition exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.
Easing of door shutters for easy closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.
Taking down shutters of any description and refixing in the same opening exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.
S&F of 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
S&F of 20 mm bore GI tubing medium grade, galvanised with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth complete all as specified and directed.
Demolition of brick work or stone masonery built in cement mortar complete all as specified and directed.
M&L for fly ash brick work with modular 'B' bricks, straight or curved on plane to any radius in half brick thick walls using modular bricks build in CM 1:4 complete all as specified and directed.
M&L for fly ash brick work in CM 1:6 using modular bricks straight or curved on plan, exc 6m mean radius complete all as specified and directed.
Demolition of concrete in ground floors and pavings (unreinforced) n exc 15 cm thickness below or above ground level complete all as specified and directed.
M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
M&L for machine cut kota stone slab 20-22mm thick in floors over and including 15mm thick screed bed or bedding layer in CM 1:4 and jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
M&L for machine cut kota stone slab 20-22mm thick in skirting, dados and similar work over and including 10mm thick rendering in CM 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand in ratio 1:3 by weight complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub bases, floors and paving complete all as specified and directed.
M&L for vitrified ceramic light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc; over and including 15 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and directed.
M&L for vitrified ceramic light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm on vertical surfaces such as skirting, rises to steps, etc; over and including 10 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles complete all as specified and directed.
M&L for vitrified ceramic light shade tiles 8 to 10mm thick (square/rectangular) double charged polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc, over and including 15 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for vitrified ceramic light shade tiles 8 to 10 mm thick (Square/rectangular) double charged polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in vertical surfaces such as skirting, risers to steps, etc over and including 10 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 sqm in floors etc. over and including 15 mm thick screed bed or bedding layer in CM 1:4, set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 sqm, as in vertical surfaces such as skirting, risers to steps, etc over and including 10 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
M&L for glazed ceramic tiles of size 450x350x7mm thick on vertical surfaces of walls such as dados and similar work; over and including 10 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L for marble work 18-20 mm thick (Makrana white) table rubbed and polished/moulding as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to mactch with shade complete all as specified and directed.
M&L for granite stone work 18-20 mm thick (of any type/colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite complete all as specified and directed.
M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc over and including 15 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.
M&L for endura joint free coloured tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm, in floors etc over and including 10mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed. Make: Johnson endura or equivalent as approved by GE.
S&F in replacement 12mm thick laminated wooden flooring including polishing all as per manufacturers direction complete all as specified and directed. Make: Action Tesa or equivalent as approved by GE.
S&F of powder coated aluminium frames for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed.
Hacking out old broken glass (any thickness quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F of 3 mm thick plain sheet glass ordinary quality n exc 0.50 sqm in each pane complete all as specified and directed.
S&F of 4 mm thick plain sheet glass ordinary quality n exc 0.50 sqm in each pane complete all as specified and directed.
S&F of 4 mm thick plain sheet glass ordinary quality exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repairs 12mm thick toughned glass in door, partitions etc similar work etc with stainless steel handle in approved shape and design complete all as specified and directed.
S&F of solar control film 25 micron reflective type sticked to glass panes as per manufacturer instructions complete all as specified and directed.
S&F of 105x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. made out of 1.25mm thick MS sheet complete all as specified and directed.
S&F of 125x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. made out of 1.25mm thick MS sheet complete all as specified and directed.
S&F of factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails, lock rail & bottom rail, panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.
S&F of machine moulded factory made 40 mm thick flush shutters, solid core construction with block board core and ply wood face panels, decorative type on both sides and fixed to chowkats complete all as specified and directed.
S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F of factory made solid PVC moulded door shutter with particle board core 32 to 35mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick 3D plain colour PVC sheet on the front face and 2mm plain colour PC sheet on back face complete all as specified and directed. Make: Sintex Industries/ Poly WIndows/ Dura Plast/ Accucell as approved by GE
S&F in repairs to double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repairs to aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters upto 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
S&F of butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 and fixed complete all as specified and directed.
S&F of butt hinges 100mm size medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F of butt hinges 125mm size medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.
S&F of 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to frames complete all as specified and directed.
S&F in repairs to stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to frames complete all as specified and directed.
S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F of 300mm ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
M&L in repairs 25mm stainless steel drepary curtain rod decorative type including curtain fancy type brackets & nobs complete all as specified and directed.
Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.
S&F of galvanised cold rolled steel section framed work size 600x600mm grid size, 24x38x0.60mm tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section including expansions fasteners as in ceiling compete all as specified and directed. Make: Gabson or equivalent as approved by GE.
S&F of 6mm thick exposed metal frame ceiling calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed. Note: Frame work for ceiling shall be measured and paid separately.
S&F of 40mm wide of flap continuous (piano) hinges, brass, bright finish complete all as specified and directed.
S&F in repairs prelaminated particle board 18/19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work and fixed complete all as specified and directed.
S&F of 100mm stainless steel handle, cast type, polished bright complete all as specified and directed.
S&F in repairs 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.
S&F in reapirs 0.9mm thick decorative laminated type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions complete all as specified and directed.
S&F in repairs to cabinet hinges soft close SS 8 crank complete all as specified and directed.
S&F in repairs 40mm long magnetic catcher for cupboard shutter complete all as specified and directed. Make: Hettich or equivalent as approved by GE.
S&F of kitchen baskets with 100% stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500mm car case depth of 558mm and height 100mm complete all as specified and directed. Make Life time-code: DSN 21 or equivalant as approved by GE.
S&F of kitchen baskets with 100 % stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500mm car case depth of 558mm and height 150mm complete all as specified and directed. Make:- Life time-code: DSN 21 or equivalant as approved by GE.
S&F of kitchen baskets with 100 % stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500mm car case depth of 558mm and height 200mm complete all as specified and directed. Make:- Life time -code: DSN 21 or equivalant as approved by GE.
Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed.
S&F in repairs to cascade type wash down water closet with seat cover, waste pipe, cistern with lid & fittings (complete set) and fixed complete all as specified and directed. Make: Hindware/ Cera/ Parryware as approved by GE.
S&F in repairs stainless steel towel rack 600mm long complete all as specifed and directed.
S&F in repairs vitreous china squatting pan Orissa pattern 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including cement concrete bedding and making good disturbed surfaces complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs PVC low level flushing cistern of 10 Ltrs capacity with all internal fittings including flush pipe and fixing to WC complete all as specified and directed.
S&F in repairs vitreous china wash hand basin white flat back of size 550x400mm excluding tap but including brackets/CP brass 32mm waste coupling and waste pipe complete all as specified and directed.
S&F in repairs stainless steel sink, 1.00mm thick for kitchen, with plug, washers, waste coupling, waste pipe including bedding in cement mortar to dwarf wall or fixing with cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx330mm x160mm complete all as specified and directed.
S&F in repairs 15 mm angle valve stop cock cast copper alloy, screwed down high pressure chromium plated fancy type screwed both ends for iron pipe or unions and fixed complete all as specified and directed.
S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated fancy type screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm pillar taps cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long shanks and fly-nuts screwed for iron pipes and fixed including necessary small GI fittings complete all as specified and directed.
S&F in repairs to 15 mm wash basin mixer, centre hole, mixing hot and cold water, cast copper alloy, chromium plated fancy type, with capstan head, screwed down high pressure for iron pipe etc and fixed complete all as specfied and directed.
S&F in repairs CP Health faucet suitable for 15mm bore with 1.2m flexible pipe and connecting pieces including all necessary accessories complete all as directed.
S&F in repairs stainless steel overhead square shower of size 150mmx150mm with arm and fixed to 15mm dia pipe complete all as specified and directed.
S&F in repairs 15mm wall mixer with provision for bath telephone shower and overhead shower cast copper alloy, chromium plated fancy type, with capstan head, screwed down high pressure for iron pipe etc and fixed complete all as specfied and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs hydraulic plastic water closet seat cover, any colour, slow motion/ soft closure complete all as specified and directed. Make: Hindware /Parryware /Prayag as approved by GE.
S&F of tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed.
S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm angle valve two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 3mm thick looking mirror of approved quality with wooden back and edge bedding and fixed complete all as specified and directed.
S&F in repairs 10mm thick glass shelf (with bracket) of 22 inch long chromium plated fixing complete all as specified and directed.
S&F in repairs 10mm thick corner glass shelf (with bracket) of 10'' radius complete all as specified and directed.
S&F in repairs CP toilet paper holder with stainless steel flap complete all as specified and directed.
S&F in repairs soap dish holder of bottom CP and glass holder for soap complete all as specified and directed.
S&F in repairs CP towel ring round with round flange complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.
Dismantling timber in fillets rails, posts, rafters, purlins, etc under 40 Sqcm in section unframed work complete all as specified and directed.
S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in ridges and similar work fixed with self tapping screws complete all as specified and directed.
M&L for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations sid lap fixed with L type or J type or cranked hook bolts complete all as specified and directed.
M&L for preparation of new or previously untreated surface of steel and iron of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hingsor steel hanging door fittings (including of steel sheeting or other covering Fe-410-W(Gde-E250) complete all as specified and directed.
M&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.
S&F of mild steel work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc; (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
S&F of 75 mm dia PVC(SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
S&F of 110 mm dia PVC(SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
S&F of 75mm bore PVC(SWR) bend complete all as specified and directed.
S&F of 75mm bore PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and directed.
S&F of 75mm bore PVC(SWR) vent cowl complete all as specified and directed.
S&F of 110mm bore PVC(SWR) vent cowl complete all as specified and directed.
M&L for PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd.
S&F of 110mm bore PVC(SWR) bend and fixed complete all as specified and directed.
M&L for grinding and polishing kota/marble/terazoo/mosaic flooring complete all as specified and directed.
Dismantling of water tanks of exc 250 litres but n.exc 500 litre capacity complete all as specified and directed.
Dismantling of water tanks of exc 500 litres but n.exc 1000 litre capacity complete all as specified and directed.
S&F of 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers(cylindrical vertical with closed top) triple layer hoisted and fixed in position complete all as specified in SSR Part-I and directed.
S&F of 1000 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers (cylindrical vertical with closed top) triple layer hoisted and fixed in position complete all as specified in SSR Part-I and directed.
S&F of 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Taking down existing old roof treatment of any description, any type including removal of old Tar felt, screed bed and plastering etc complete all as specified and directed.
M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen @ 1.2 kg/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using butane torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 with and including ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the roof slab at least for 72 hrs complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in benching/angle filleting at the junction of parapet and RCC roof complete all as specified and directed.
M&L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing compound complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
M&L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
M&L for grouting of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipe nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per manufacturer instructions complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling by brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for complete removal of old decorated surface of wall/ceiling and applying two coats of oil emulsion distemper white/tinted over one coat of white cement based putty complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall/ceiling including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coats of oil emulsion distemper white/tinted over a coat of wall primer complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint on wall complete all as specified and directed.
M&L for removal of old decorated wall surfaces and applying two coats of exterior weather proof water base emulsion paint over a coat of wall primer complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over a coat wall primer complete all as specified and directed.
M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted iron or steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for 3mm thick coat of wall care putty on walls/ceiling, finished even and smooth complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (reflective type) any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-35 grade including 50mm stone dust layed in floors or paving etc spread, levelled and rammed including watering complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (reflective type) any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness, M-40 grade including 50mm stone dust layed in floors or paving etc spread, levelled and rammed including watering complete all as specified and directed.
S&F in repairs to solid PVC wall lining consisting of 5mm thick but wood grain printed PVC sheet used instead of plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F in repairs to 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and directed.
S&F in repairs to factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other frames/chowkhat of size 65mm x100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic aditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as per specified and directed.
S&F in repairs to factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65mm x125mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic aditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.
S&F of GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
M&L for providing and fixing 12mm gypsum board ceiling fixed with and including GI angle/ channel frame work including GI wire/ mesh, etc suspended from soffit at required length with GI cleat and steel expansion fasteners in different levels including joints filled with paster of paris, putty including POP work/ cornices and applying two coats of oil bound distemper complete all as specified and direcetd.
Dismantling of structural steel work including doors,gates etc complete all as specified and directed.
S&F in repairs half stall vitreous china urinal white colour of size 710x480x300mm, Ist quality with sensotrinic, sensor flushing valve with kit including CP waste with PVC down waste pipe upto floor level (complete set) complete all as per manufacturer instructions and directed. Make: Jaquar (Cat No. URS-WHT-0704, SNR-51097) or equivalent as approved by GE.
M&L for petty reapirs to half stall vitreous china sensor type urinal with and including changing of sensor of flushing valve with kit complete all as specified and directed.
S&F in repairs 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repairs 100 mm stainless steel handle, cast type, polished bright of approved quality complete all as specified and directed.
S&F in repairs 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F of 30 mm thick factory made moulded door shutter-wood free consisting of frame madeout of M.S tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom and lock rail M.S frame shall have a coat of metal primer of approved make and manufacturer. The panel shall consist of 20 mm thick multi chanmber hollow PVC section of 1mm wall thickness bonded using solvent cement / cinoacrylate adhesive with 5mm (+/- 0.25) thick moulded PVC sheet of densitiy 600 kg/ Cum manufactured by ISO -9001-2015 certified company with 2,4,6 raised pannel design in prelam colour after routing the molded design on one side of the inside pannel 5mm (+/- 0.25) plain PVC sheet to be pasted using solvent cement / cynoacrylete adhesive on other one side of the hollow PVC section. All four edges of the pannel to be seald with lipping of 10mm thick and 20 mm wide PVC sheet baton (made by sticking 2 Nos. fom PVC sheets of 5mm (+/-0.25) thickness using PVC solvent cement adhesive. Door edges liping to be PVC ink of matching colour of plain / prelam moulded PVC sheet of door 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provn at lock height. door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25mm x 2mm and 50mm long steel screw drilled suitable to pass through both the walls of the MS tube other hardware should be fixed with 25mm x 8mm size steel screw etc, complete all as per manufaacturer specification and drawing and directed.
S&F of factory made PVC door frame (single rebate) made out of single piece extruded solid PVC fom profile with homogenous film celuler structure having smooth outer integral skin having 62mm width and 32mm thickness of density 600kg/ Cum manufactured by an ISO-9001-2015 certified company, frame will be mitred and jointed with self driven self taping screws of size 50mm x 8mm and PVC solvent cement or fusion heat welding process complete all as per manufactures specification and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 41585.00
MS MOHD RIZWAN KHAN
R K Sales
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .