16/SE/EWC/AYO/2024-25

Amount

Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EE ESD Ayodhaya to dump site proper stacking.

STP 11 Mtr.

PCC 9.00 Mtr

M.S. Top Channel 125x65 mm 3200 mm

M.S. Angle 65x65x6 mm Bracing, 4300 mm

MS Angle for guarding 65x65x6 mm, 3500 mm long

GI Wire 8 SWG

GI Wire 6 SWG

33 KV Disc Insulator B & S Type polymer 70 kn

V Type channel cross arm

33 KV Pin Insulator polymer type

Stay Wire 7/8 SWG

ACSR Dog Conductor

Cost of 33 KV 3x300 sq mm XLPE Cable

33 KV Outdoor jointing Kit for 3x300 sq mm XLPE Cable

33 KV S/T Jointing kit 3x300 xlpe cable

M.S. Channel 125x65x6 (for structure )

M.S. Angle 75x75x6 (for structure)

M.S. Channel 100x50x6 (for Bracket )

M.S. Angle 65x65x6 (for Bracket)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, 3 No. polymer Pin insulator as per norms. (Contractor shall provide , necessary clamps, F-brackets, Nut - Bolts, Washers etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Sectional Double pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm , Bracing angle 65x65x6 4300 mm 1 set.,33 Kv , polymer Disc insulator 6 No. and 3 No.polymer Pin insulator as per norms. (Contractor shall provide , E- Bracket , P.G clamps, Disc Fitting, Nut - Bolts etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Sectional Double pole for 33 KV Line on 11.0 Mtr STP Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm,, 6 No. Disc. Fitting , Bracing angle 65x65x6 4300 mm 1 set., 33 kv polymer Disc insulator 6 No. and 3 No. polymer Pin insulator polymer as per norms. (Contractor shall provide , E- Bracket,P.G clamp, necessary clamps, Disc Fitting, Nut - Bolts etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Dead End Double pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm ,Disc insulator 3 No, Bracing angle 65x65x6 mm 1 set as per norms. (Contractor shall provide , P.g clamps, , Nut - Bolts washers etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Dead End Double pole for 33 KV Line on 11.0 Mtr STP Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm, 3 No. Disc. Fitting , Bracing angle 65x65x6 4300 mm 1 set., Disc insulator 3 No. as per norms. (Contractor shall provide , necessary clamps, Disc Fitting, P.g clamp Nut - Bolts washers etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 No. Channel Cross Arm,3 No. polymer Pin insulator as per norms. (Contractor shall provide necessary clamps, F-brackets/top cleet, Nut - Bolts, Washers etc.)

Erection of single stud pole support on PCC Pole 9.0 Mtr long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)

Erection of single stud pole support on STP Pole 11 Mtr long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Exposure Double pole for 33 KV Line on 11.0 Mtr STP Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm . , Bracing angle 65x65x6 4300 mm 1 set. ,9 No Polymer Pin insulator etc as per norms. (Contractor shall provide all necessary clamps, P.G clamp, Nut - Bolts & washer and E-bracket, if required etc)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Exposure Double pole for 33 KV Line on 9.0 Mtr Pcc Pole with fitting of necessary clamp & other acessories like 3 No Top channel of 125x65x6 mm size 3200 mm . , Bracing angle 65x65x6 4300 mm 1 set. , 09 No Polymer pin insulator etc as per norms. (Contractor shall provide all necessary clamps , P.G clamp Nut - Bolts&washer and E-bracket, if required etc)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Four pole for 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 4 No. Top channel of 125x65x6 mm size 3200 mm, Bracing angle 65x65x6 mm 4 set, 6 No. 33 kv Polymer disc insulator B &S , Polymer Pin insulator 09 No. as per norms. (Contractor shall provide , E- Bracket, P.G clamps, Disc Fitting, F-clamp , Nut - Bolts washers if required etc. )

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Four pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 4 No. Top channel of 125x65x6 mm size 3200 mm, Disc Fitting 6 No. Bracing angle 4 set, 6 No. 33 kv Polymer disc insulator B &S , Polymer Pin insulator 09 No. as per norms. (Contractor shall provide , E- Bracket ,P.G clamp, necessary clamps, P.G clamp ,Disc Fitting, F-clamp , Nut - Bolts washers if required etc. )

Cradle Guarding of 33 KV line at road crossing/ 11 KV line crossing, canal/telephone line crossing by fixing Guarding Angle 65x65x6 mm, 3500 mm at double pole and 2600 mm long at single pole by stringing and sagging of 3 No. G.I.wire with lacing and tightening with mounting. (Contractor shall provide Necessary clamps for fitting of guarding angle and 6 No. Eye hook&bolt 12x110 mm etc.)

Fixing of additional 33 KV V-type X arm with clamp, nut & bolts etc by replacing damaged and those places where 33 kv cross arm not attached with existing 33 kv line which is on the route. And replace 33 kv cross arm will be desposited the store.

Fixing of additional 33 KV polymer Disc insulator with clamp, nut & bolts etc by replacing damaged and those places where 33 KV polymer Disc insulator not attached with existing 33 kv line which is on the route. And replace 33 kv cross arm will be desposited the store.

Providing and Fixing of 33 KV Disc fitting for Dog at required places.

Fixing of additional 33 KV polymer Pin insulator with clamp, nut & bolts etc ( either on cross arm etc) by replacing damaged and those places where 33 KV Pin insulator not attached with existing 33 kv line which is on the route. And replace 33 kv cross arm will be desposited the store.

Providing and Fixing of bracing clamp with nut and bolt at required places.

Fabrication and Fixing of additional Bracing angle 65x65x6 4300 mm with clamp, nut & bolts etc. at required places. (Contractor shall provide clamp with nut & bolts washers etc except bracing angle).

Providing and Fixing of clamp for 33 kv cross arm with nut & bolts washers at required places.

Fabrication and Fixing of additional Top channel 125x65x6 3200 mm with all necessary clamp, nut & bolts washers etc. at required places. (Contractor shall provide nut & bolts washers etc except top chanel).

Providing and Fixing of F-clamp with nut & bolts/top cleet/e-clamp washers at required places.

Earthing of Existing Pole STP/PCC/ Rail pole by 6 SWG Wire at required places by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like 6SWG GI Wire, Earthing rod, Earthing clamps and nut and bolts.)

Providing of nut & bolts of different size.

Providing and fixing of G.I strip 50x6 mm with cutting, welding in complete all respect for Railway crossing .

Providing and fixing of barbed wire at required places/existing pole.

Providing and fixing of danger board at required places/existing pole. with clamp, nut bolts and washer.

Providing and Fixing of clamp with nut and bolt for 33 KV Top chanel at required places.

Earthing by way of boring and lowering the "B" class GI pipe of 55 mm dia from ground upto water level not less than 20 mtr. As per standard practice . The G.I pipe which laid down below the railway crossing and C.T, L.A, VCB etc. structure will be connected with G.I strip 50x6. (All material will be supplied by the contractor)

Cable stand Structure Fabrication & erection of 33 KV Cable Stand made of 02 No. M.S chanel 125x65x6 mm 3 Mtr. Jointed to each other by M.S Channel horizontally and also jointed to each other by means of 05 No. M.S Strip (m.s flat) 50x6 mm of size 200 mm long each by welding at actual distance interval as per norms. And grouting in block of 300x300x700 completely providing 02 no. cable clamps also and eathing by G.I strip 50x6 mm size with the earth mat of switchyard both side of legs and provideing clamps , post/ pin insulator for holding cable. (All the materials will be arranged by the contractor such that clamps nut bolts and civil materials except M.S channel.)

Nozeling and grouting of stay at sectional pole and extra stay sets at angle locations (All the civil material and stay set, stay clamp will be arranged by the contractor except stay wire)

Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase of 33 KV Line including fixing, mounting of P.G.clamp suitable for Dog Conductor at sectional point. (Contractor shall provide necessary PG clamps etc)

Providing and fixing at the top of the pole Pcc & Stp Extension piece 1.5 mtr channel 125x65 mm and required places ( crossing of lines etc) and supporting with clamp and all fittings. (All materials will be supplied by the contractor).

Angle for Cross arm Support at Angle Location 65x65x6 mm 1600 mm long with clamps and nut & bolt. (All materials will be supplied by the contractor)

Straightening of additional existing erected/tilted pole with Digging & grouting at required places (All the civil material will be arranged by the contractor) Grouting of structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9.0 Mtr PCC / 11 Mtr STP/13 Mtr STP respectively, placing stone pad at bottom 450x450 size foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.268/0.285 cu mtr for 9.0 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.

Inspection Pit will be digged as per the direction and supervision of JE/AE/EE.

Laying & Dressing of 3x300 sq. mm XLPE Cable underground Double Circuit. Laying of double circuit 3x300 sq .mm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required materials, as 1st class Bricks, Stone slabs and fine sand. Providing 150 mm fine sand cusion beneath, and 150 mm sand cusion above the cable. The cable shall be duly protected by Bricks, sand and stone slab. The inter axial spacing between two cables should be in between 0.25 to 0.04 M. After laying the cable refilling and ramming of the left out soil,closing the trench and leveling.

Installation of Heat Shrinkable Type cable jointing kits of following types/sizes for 33 XLPE Cable.

(a) Fixing of 33 KV 3x300 sq. mm Straight Through joints. (jointing kit supplied by dept.)

(b) Fixing of 33 KV 3x300 sq. mm Outdoor End Terminations (jointing kit supplied by dept.)

High Pressure testing to which 33 KV Line & cable to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor)

Hoisting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping, providing long barral lugs 6 nos and P.G. Clamps & "Y" shape jumpering properly and 02 nos. supporting angle 65X65X6, 2240 mm long and making connection including supply of jumpering cable ,mounting clamps as per RESSPO Norms. (All material will be supplied by the contractor like M.S Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65X65X6, 2240 mm and jumpering cable suitable for 33 KV jumper).

Grouting of following structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9.0 Mtr PCC / 11 Mtr STP respectively, placing stone pad at bottom 450x450 size foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.268/0.285 cu mtr for 9.0 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.

11 Mtr ST Poles

9.0 Mtr PCC pole

Supply and fixing of a stone pad of size 300x300x75 mm at PCC/STP Bottom of the pit ( Contractor shall provide all materials)

Cable route marker Fabrication, Erection and grouting of route marker and marking 33 KV line by painting after grooving on the stone. (Contractor shall provide all materials)

Fixing of barbed wire on pole Supply and fixing of barbed wire on the pole above 2750 mm ground level. Barbed wire wrapped for a distance of 0.9 mtr. with a pitch of 13.mm at a height. (All materials supplied by the contractor)

Fixing of Danger board . Supply and fitting of Danger board of size 250x200x2 mm 3650 mm above ground level with the help of proper size of nuts, Bolts , washers and clamps as per Respo norms. RESPO Drawing No-55 (All materials supplied by the contractor)

Fixing of Number plate . Supply and fitting of Number plate of size 250x200x2 mm 3650 mm above ground level with the help of proper size of nuts, Bolts , washers and clamps as per Respo norms. RESPO Drawing No-55 (All materials supplied by the contractor)

Earthing of Pole Earthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod, Earthing clamps and nut & bolt etc except earth wire.)

Petrolling in feet from starting to end and removal/lopping and chopping of tree branches which are lying in routre of 33 KV overhead line.

Providing of HDPE 6"Dia Pipe PN-6 Specification

Laying of cable & HDPE Pipe Laying of Double circuit 33 KV 3x300 Sq mm XLPE cable and HDPE Pipe by drilling method below NHAI road crossing. The cable be laid at the depth of 3 mtr from the under surface in HDPE pipe (200 mm. dia.) casing.

Providing of G.I Pipe 6" Dia B class pipe for Railway Crossing .

Laying of cable & G.I Pipe Laying of Double circuit 33 KV 3x300 Sq mm XLPE cable and G.I Pipe by drilling method below Railway line. The cable be laid at the depth of 3 mtr from the under surface in G.I. pipe (200 mm. dia.) casing.

Laying of cable Though HDD method D/C Laying of 33 KV 3x300 Sq mm XLPE cable by HDD drilling method . (Ensure of drilling of cable one by one) The cable be laid at the depth of 3 mtr from the under surface

NOC will be granted from Central/ state Electrical safety department.( Final settlement of the payment will be done after providing receipt, agreement and permission paper).

restoring the road as it is before after completion of work

Permission of NHAI/PWD etc. for road crossing. .( Final settlement of the payment will be done after providing receipt, agreement and permission paper)

Providing and fixing of P.G clamp for Dog conductor at required places .

Fabrication, cutting, drilling and fixing of bracket with fitting complete at required places. The bracket will be made by MS Chanel 100x50x6 mm and angle 65x65x6 mm and ensuring the proper saparation by using different size of chanel and angle at different location. ( Contractor shall provide necessary clamps ,nut bolts and washers etc. except chanel and angle.)

Hoisting of 33 KV Cable on existing/erected support on 33 kv cable stand by using clamp with nut bolt and suitble size of G.I. pipe. (All material will be supplied by the contractor like G.I Pipe ,P.G. Clamps, Al. Lug And and jumpering cable suitable for 33 KV jumper).

Permission of railway crossing permission must be granted from railway authority for laying of 33 kv cable and pipe under the railway crossing ( final settlement of payment will be on the basis of after provindg of receipt and agreement of permission of railway crossing)

permission of cutting and chopping of tree from forest deppt. ( Final settlement of the payment will be done after providing receipt, agreement and permission paper)

Painting of poles Painting of poles with one coat of red oxide, two coats of enamel paint ISI mark. (All required material will be supplied by the contractor)

Hindustan Electric Work

M/s S S Associates