Construction of ladies and gents toilet at vaigai vadakarai near by RR mahal in ward 30

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., completed

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and filling in foundation and basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height (the retrived materials) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid (For Rectangular or Square Columns )

Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (RCC column footing plinth, beam and lintel sides)

Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (bottom only)

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 8 3/4" x 4 1/4" x 2 1/4" including finishing, curing, etc., complete complying with standard specification .

Plastering with cement mortar (1:3) 10mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc, complete as per standard specifications (S.I.306)

Painting New wall surface with Two coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour.

Painting with Ready Mixed Enamel Paint over the new Iron works of approved quality and colour with priming coat including the cost all materials etc., complete, in all floors.

Weathering Course with Concrete Broken Brick (S.I.No.278) & (P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supply and Delivery Fabrication of MS Doors with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.. Fully panelled Double leaf - Door (0.90m x 2.00m)

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supply and Delivery Fabrication of MS Window with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. Vent (0.60m x 0.60m)

Paving the floor with design Anti skirt ceramictiles (colour and shade as directed) of size 305mm x 305mm x 6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement Colour

Dadooring the colour glazed wall tiles of size 300mmx200x6mm pardon cement morter 1:2:10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joints and pointing flesh with total surface etc., complete

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthenware of approved quality with 'P' trap or 'S' trap confirming to IS:2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to castiron soil pipes/PVC pipes by dismandling brickmasonry, reinforced cement concretero of/floor slab and making good the disturbed portion to original condition with out leakage etc., complete complying with standard specifications and as directed by the departmental officers

Construction of Inspection Chambers of following sizes with earth work for foundation with 25cm thick brick jelly cement concrete bed in C.M 1:4:10 using 40mm brick jelly for foundation brick work in C.M 1:6 for chambers, plastering with C.M 1:3 12mm thick benching, channelling, 75mm thick RCC loose slab covering in CM 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement etc complete 60x60x60cm

Supply and Delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading ,transportion and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc, complete PVC Water Tank (1000 Lit)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End

Supply and fixing of 18W 4 Feet LED Fitting with LED

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered withhylem sheet of size 3feet x 2feet of 12mm thick ness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1No. neutral link, copper earth flat of size1"x1/4" with inter connection of EB meterto fuse units by 19/16 PVC insulated copper wire with earth connection complete

Drilling of Borewell anywhere in Tamilnadu including transportation from one place to another place within tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand,stone ,shale ,pebbles ,boulders etc.,by first taking a piot bore of 140mm/150mm dia and then enlarging to required dia by direct of reverse rotatry mud and circulation method using Contractor's rig, fuel, labour ,drilling , betonite mud and water required for drilling at the site shown by the TWAD Officers including Construction of Mud Pit (Only Calyx Drills are to be used) Etc.Complete Drilling 140/150mm Dia Pilot Bore Upto 60m Depth Ending Below Ground Level

Supply of 150mm dia P.V.C casing pipe As Per IS 12818/2010 (Outer Casing) - 150mm CS

Labour charges for inserting 150 mm dia M.S. Casing pipes assembly (With slots or without slots) in the drilled hole including welding the joints and packing annular space with pebbles of size and quality as approved by the Executive Engineer / TWAD Board

Drilling 150mm dia vertical bore in hard rock to any required as directed by Corporation Officers including charges for drilling and Water required for drilling and fuel (Drilling of borewell inside well 150mm dia.)

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by Officers and conducting yield test by ‘V’ notch method.

Supply and Delivery of Clear Water Vertical Wet Type Submersible Pumpset Suitable For 150mm Dia Borewell Conforming to IS 8034/2002 With latest amendments and BEE 3 Star rated capable of Discharging noted LBM Against head of water column due to all causes.the pump shall be with stainless steel shaft and dynamically Balanced bronze or Cast SS Impeller,Brass screws and CI FG 200 Grade Pump Bowl/Difuser with ISI Mark.The Pump Shall be directly Coupled to a Continuous rated two pole Suitable wet Type Vertical Squirrel cage induction motor as per IS 9283 Suitable for Operation in AC 3 Phase 415 V+/- 10 % , 50 HZ +/-5% Duty (50 lpm x 100m) Three Phase Submersible Pumpset Suitable for 150mm Dia Borewell As Per IS 8034/2002 Witout Panel Board

Supply and Delivery of Direct Online Starter Confirming to ISI 13947 and IEC 947 Suitable KW Rating for Operation in AC/Single Phase/50HZ (+ 5%) and 415 V (+-10%) Including Ammeter,Voltmeter ,Thermal ,Overload Relay , 16Amps 2 Pole Magnetic Contactor with Under Voltage Protection , Indication Lamp,Starting Capacitor,running Capacitor and On/Off Push Button Switches,5 Way Connector , wiring with 1sq.mm / 1.5sq.mm Copper PVC Insulated Cable,Powder Coated Vermin Proof Box including the Capacitor (the Costy of Capacitor is to be taken Separately) Etc.Complete.THREE PHASE PANEL BOARD - D.O.L WITH TWO LEVEL GUARD AND AUTO START (3HP Submerible Pumpset)

Supply of U PVC pipes and GI pipes and specials. 40mm UPVC Pipe

32mm G.M Gate valves

32mm GI Hex Nipple

32mm GI Union

32mm G.I Elbow

32mm G.I Tee

32mm G.I pipe

32mm G.I.couplings

32mm G.I.Bend

32mm UPVC ball valve

Nylon Rope

110mm PVC Pipe

25mm PVC Pipe

25mm PVC Tee

25mm PVC Elbow

25mm PVC Coupler

110mm PVC Tee

110mm PVC Door Elbow

110mm PVC Elbow

PVC Screw Down Tap Heavy Type 20mm dia

Labour Charges For the erection of Submerisble Pumpset in Borewell/Openwell including fixing and jointing submersible Cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN Switches starter,voltmeter ,Ammeter ,Three pilot (Indicating) lamps capacitor single phasing preventor , water level guard and laying and jointing the cables and twin earthing as per IE Rules etc.,complete and testing the pumpset and trail run for 10 Days Upto 3HP

Supply and delivery of PVC insulated and sheathed 4.00 sq mm copper cable conforming to IS 694/1990 suitable for submersible pump set.

Add GST 18%

V BOSE (BID ID -1506951)