Repair works to the corporation SS ward office at Chetti street in ward no 80 central zone

Dismantling the damaged RCC as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3

Dismantling the damaged Plain cement concrete as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3

Dismantling the damaged brick work as per directed by the departmental officers CCMC SOR-25-26 Pg.no-3

Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3 CCMC SOR-25-26 Pg.no-3

Conveyance of excavated earth and clearing away from site to a lead of 2KM from site etc., complete CCMC SOR-25-26 Pg.no-3

Plain Cement Concrete1:4:8 (one part of cement, four part of Crushed Stone Sand (M-Sand) and Eight part of coarse aggregates ) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification CCMC SOR-25-26 Pg.no-4

Plain Cement Concrete1:2:4 (one cement, two Crushed Stone Sand (M Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification CCMC SOR-25-26 Pg.no-4

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3 m high using mild steel sheets of size 90 cm X 60 cm X and B.G10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size10cm X 6.5cm (spacedat about 90 cmc/c)and supported dycasur in a props of 10 cm to13 cm dia (spacedof75cmC/C)complying with standard specification and directed- 10 m 2 (P & D) Data 38 CCMC SOR-25-26 Pg.no-5

Suppling and fabricating and placing in position MS (or)R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. CCMC SOR-25-26 Pg.no-8

Reinforced Cement concrete 1:1.5:3 (one cement,one and half M.sand & three course aggregate) using 20 mm gauge hand broken/and broken granite stone for all RCC items of works excluding centerings huttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. CCMC SOR-25-26 Pg.no-5

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230 x 110 x 70 mm (83/4"x41/4"x23/4") including cost of materials and labour charges etc., as per standard specification - 1m3 CCMC SOR-25-26 Pg.no-9

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)),10 mm thick in all floors including cost and conveyance of all materilas to site and labour chargesetc,completeas per standard specifications CCMC SOR-25-26 Pg.no-9

Plastering with cement mortar 1:5(One part of Cement and Five part of Plastering Sand (P-Sand))12mm in all floors including cost and conveyance of all materilas to site and labour chargesetc,completeas per standard specifications CCMC SOR-25-26 Pg.no-9

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600 x 600 x 8 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20 mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work CCMC SOR-25-26 Pg.no-11

Paving the floor with design Antiskirt ceramic tiles (colour and shadeas directed)of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20 mm thick laid in-situ and pointed with same coloured cement CCMC SOR-25-26 Pg.no-11

Dadooing walls with ceramic tiles of sizes 300 mm X 450 mm X 8 mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P-Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. (Sl.No.360f) CCMC SOR-25-26 Pg.no-11

Weathering Course with Concrete Broken Brick (S.I.No.278) & (P&D) Data 54.Jelly 20mm gauge in pure slaked lime (nosand tobeadded) over roof slab,the proportion of brick jelly to lime being '32 to12.5 well beated with wood enbeaters forgiving required slope and thicknessas directed by the departmental officers etc., complete.-10 cum CCMC SOR-25-26 Pg.no-10

Painting two coats for Interior surfacewith approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.394) CCMC SOR-25-26 Pg.no-12

Painting two coats for Exterior surfacewith approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.404) CCMC SOR-25-26 Pg.no-12

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. PWD SOR-25-26 Pg.no-118

Supplying and fixing in position Indian water closet of size 580 X 440 mm, white glazed earthenware of approved quality with 'P' trapor 'S' trap confirming to IS :2556- Part XII with sand cushion and forming flooring alround the closet using 40 mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly)100 mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slabandmaking good the disturbedportion tooriginal conditionwithout leakage etc., complete complying with standard specification sand as directed by the departmental officers. CCMC SOR-25-26 Pg.no-15

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100 mm“P”or“S”trap connecting with CI pipe of 100 mm dia/ PVC pipe of 110mm dia,double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spunyarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings,suchas, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flushh and using Indian adopter joint including all internal fittings, suchas, 15mm bras connections,15 mm GM wheel valve,15 mm brass nipple (2Nos.),15 mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc.,complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. CCMC SOR-25-26 Pg.no-15

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I. Pipe connection to suitable length, 32 mm bell mouthed P.V.C connection ,15 mm dia G.M.Wheel valve, fixing the urinal to the wall inposition with necessary T.W.plugs , clamps, screws, shellac etc.,including dismantling masonry if necessary and re doing thesame tooriginal condition ,fixing the15mm dia. G.I.pipe connection andwheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked with out any leakage complete, complying with standard specifications.-White Colour. CCMC SOR-25-26 Pg.no-15

Wiringwith2x1.5 sq.mm. PVC insulated single coreunsheathedFRLScopper conductor cableof 1100Vgrade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5 A FT switch with painting of suitable colour continuous earth wire connection of 1.5 sq.mm copper wire for lightpoint / fanpoint (for electronic regulator) Electrical SOR-25-26 Pg. no-02

Supply and fixing of 1200 mm (48")sweep AC ceiling fan complete with stepped electronic 300 W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") Electrical SOR-25-26 Pg.no-47

Supply and fixing of 4 Feet LED18W Fitting with LED18W tube(LowerEnd)complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. Electrical SOR-25-26 Pg.no-191

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb as directed by the departmental officers. Electrical SOR-25-26 Pg.no-40

Add :- GST @ 18%