Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76,900Accepted-Finance | L1 | Accepted-Finance Being lowest bidder | |
| 2 | L1₹1.2 LAccepted-Finance | L1 | Accepted-Finance Being lowest bidder | |
| 3 | L2₹2.0 LRejected-Finance BHAGWATI NAGAR JAMMU | L2 | Rejected-Finance Not being lowest bidder | |
| 4 | L3₹2.0 LRejected-Finance BHAGWATI NAGAR JAMMU | L3 | Rejected-Finance Not being lowest bidder |
Tender Value
Refer Docs
Closing Date
21 Sept 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
MID Jammu
Repair/replacement of worn out parts of 3 cusec pumping unit no. 2 along with allied works at LISDatriyal and other minor repair works of adjoining lift stations. Repair to winch machine of the regulatory gate of old bay at MRC Akhnoor along with all
2022_IFC_187552_1
MID/J/e-NIT/2022-23/44
Open Tender
Repair and Maintenance Works
Item Wise
10 days
Datriyal
As per tender notice
7 documents required · 7 mandatory
₹200
Executive Engineer MID Jammu
Exempted
1 Oct 2022
8 Sept 2022
22 Sept 2022
8 Sept 2022
21 Sept 2022
14 Sept 2022
8 Sept 2022 - 21 Sept 2022
Repair/replacement of worn out parts of 3 cusec pumping unit no. 2 along with allied works at LIS Datriyal and other minor repair works of adjoining lift stations.
Decoupling of 3 cusec x 10m head HC pump of unit no.2 at LIS Datriyal from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 03 cusec HC pump set, to the nearest roadside, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 3 Cusec HC pump set at workshop by way of dismantling and extraction of damaged internal parts. Job includes providing/fitting of new shaft sleeve and new pump shaft by turning, aligning, threading at ends and making of new keyways and its proper adjustment. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft.. Providing and fitting of bush, new gland ring, new bearings as per sample, repair of bearing housing, new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, complete reassembling of pump set after carrying out necessary repairs. Shifting back to the LIS Datriyal and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Providing and fitting of new Coupling set along with new nuts, bolts and rubber bushes. Complete job includes cost of material and labour charges. Dismantling/decoupling of the damaged 20H.P electric motor of Pumping unit no-2 from base frame, pump & motor starter electrical connections. Repairs to rotor of motor by providing/fitting of new bearings (DE & NDE) after rebuilding of the rotor shaft and finishing to bearing sizes, making new keyway for coupling, providing/fitting of bearing end cover plates and greasing them properly. Job includes cost of material and labour charges. Repairs to 20HP Manually Operated Oil immersed star-delta motor starter of Unit-2 of LIS Datriyal. Job includes dismantling of starter from its installed position after disconnecting all electrical connections on input as well as output side and then carriage of the starter to workshop for repairs/replacement of intermediate Bakelite rod, moving and fixed copper contact points, No volt coil, thimbles, overload protection relay and then back carriage to LIS for re-installation, commissioning and testing on no load and full load conditions. Job also includes providing and filling of approx.05 litres of fresh transformer oil in the tank after complete de-moisturizing. Complete job includes cost of material, skilled labour charges, tools and tackles charges and carriage charges. Repair to the rusted/damaged delivery pipe 250mm dia. Of pumping unit no. 2 of LIS Dai Chak. The Job involves dismantling of the already fitted M.S pipe of 250mm dia. from the concrete wall by cutting of the damaged portion of the M.S pipe approx. 3.5ft with the help of gas cutter and providing/fitting of the 250mm dia. M.S pipe piece of the same size by fabrication with the help of electric welding as per site requirement. Also providing/fitting of 2no.s voltmeters in place of damaged one to the 50KVA voltage stabilizer installed at LIS Dai Chak. Also providing/fitting of approx. 5m aluminum cable of 300mm2 in place of burnt/damaged one at LIS Kukerian from electric transformer to the main switch. Complete job includes cost of material, skilled labour charges, tools tackles charges and transport charges to the site.
Rebate on Old Parts
Repair to winch machine of the regulatory gate of old bay at MRC Akhnoor along with allied works.
Repair to the 1no. Winch machines (double gear and worm type) with single housing holding summer and winter regulatory gates (7.5x7.5ft each) with two stem rods for separate gates in a single housing of old bay at MRC head Akhnoor. The job includes extraction of damaged winch machine of two no.s regulatory gates with the help of manual labour. The gate leafs to be kept firmly hanged on a tripod stands with chain pulley block. Job includes shifting of damaged winch machine to workshop for carrying out necessary repairs by way of providing\fitting of new set of bearings, providing/fitting of worm & pinion set of gears as per sample. Shifting of the winch machine to the site after repairs. Application of grease to the worm & new pinion gear & on all sliding surfaces. Installation of winch machine at site and checking for smooth operation of the gate. Complete job includes material cost, labour charges for hiring tools and tackles, consumables, chain pulley block and mechanical transport to and fro, to workshop etc. complete job by skilled work force through operation of mechanical/electrical hoist mechanism. Job involves extraction by proper alignment from the hanger so that the gates are not literally tilted, no damages occur to seals & hoisting it outside the groove and then stacking the stop log gate on the platform for installation of rubber seal of 12mm approx.16ft on side of the each gate. Job involves lifting of the stop log gates and stacking them again in the hangers with the help of hoisting mechanism with the help of DG set, hiring charges of safety equipment, skilled labour, cables required for temporary connections, cost of POL, tools & tackles, cost of device and other safety equipments etc. Complete job.
Rebate on Old Parts
M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS
M/S FASTTRACK ENGINEERS
BEE AAR ENTERPRISES
BEE AAR ENTERPRISES
M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS
M/S FASTTRACK ENGINEERS
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .