Polur - Taluk Office Electrical

Amount

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of 1'x1' 24w LED 4000K Squre type Recessed fitting with Complete and PVC unsheathed Copper leads from terminals to the fitting(Make:Havells/equivalent)

Supply and fixing of 2'x2' 42w LED 4000K Square type Recessed fitting with Complete and PVC unsheathed Copper leads from terminals to the fitting(Make: Havells)

Supply and fixing of 20 W 4 Feet LED fitting complete with TW round blocks on wall or ceiling with with PVC unsheathed Copper leads from terminals to the fitting. (Make: Havells)

Supply and fixing of 4' 20 W LED (Single Side)Twin box type fitting (Philips / Crompton / Wipro) complete louvers cover complete with fitting with 4'20W LED tube with PVC unsheathed leads from terminals to the fitting with LED tubes(Make: philips/Havells)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 10 watts WT bulk head with ultra white modern,energy saving, surface mounted,decorative hexagon bulk head back lite LED luminaire comprising of high brightness LEDS. MAKE :havells

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 3nos.6A two module 5 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6A two module 5pin socket, 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (For Each Floor 2 Nos-Non Essential-1No,Essential-1No )

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 125A 4P MCCB switch as incoming and 4 nos.63A 3P MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End (For Ground Floor 2 Nos-Non Essential-1No,Essential-1No )

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and run of 4 of 16 sq.mm (101./0.45) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. (For Mccb DB)

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 95 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (For EB pole to Electrical room)

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 70 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (For DG)

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of 3 phase 200A aerial fuse units for 3 nos 200A fuse units on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work tapping pole with necessary clamps.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and erection of Indoor units of 2 Ton capacity (3 Star Rated) Split type Airconditioner unit confirming to ISI 1301 (Part-2) 1992 with amendment No.1 fitted with Hermetically sealed compressor operation on 230 V 50Hz AC Supply system with energy efficient operating system with refrigerant gas R-22 suitable for high wall mounting evaporator and specification as under general requirement interconnection of pipes and cables. (Make : Blue Star, Carrier, Voltas)

Supply and erection of 5 KVA Capacity Automatic voltage stabilizer suitable to operation on 230 Volts, single phase, 50Hz, AC supply system with time delay relay and High/Low voltage cut off, input voltage range 170V to 270V single phase, wall mounting type stabilizer with necessary clamp. .(Make : V-Guard)

Supply and laying of 5/8" and 3/8" Copper Pipe (Extra beyond 3 metres supplied with AC unit .

Supply and fixing of water drain pipe line (1" PVC pipe).

Supply and fixing of Ms stand for fixing outdoor unit.

21) 1no. Signal lamp for indicating load on main 22) 1no. Signal lamp for indicating load on set 23) 1no. Signal lamp for indicating fails to start 24) 1no. Signal lamp for indicating set running 25) 1no. Signal lamp for indicating battery charger ON 26) 1 set pilot lamp of 3 nos 27) MCCB of 63 A capacity with magnetic over load release,instant short circuit 28) Rectangular copper bus bars of adequate capacity duly color coded with heat shrinkable PVC sleaves 29) 1 no.mains voltage monitor 30) Hooter/Audio alarm for indicating set fails 31) 1 set timer 32) Audio visual indicator arrangements for a) low lubricating oil pressure b) High water temperature c) Over speed 33) 1 no earth fault relay 34) Isolator to isoalte the neutral (E)ACOUSTIC ENCLOSURE Canopy will be powder coated and fabricated out of 16 SWG CRCA MSSheet , with nut & bolt type , inside lining of fire retardant foam 80/100kg /M3 density of 25 mm thickness as acoustic material . Four hinged doors and onedorr fitted with visible glass and locks . the Generator set base frame is provided with hooks for unloading .Canopy will perform +5deg celsius than Normal ambient temperature .No grouting required on the ground ,level surface capable or withstanding the DG Weight , with all sides open for fresh air and hot air exhaust the Canopies offered one for output of< 75 DBA at a distance of 1 mtr average around the set conforming CPCB Norms.

(F) BASE FRAME Base frame is fabricated in sheet metal rugged in construction and designed for mounting engine and brushless alternator close coupled with cross mounted on AVM the base frame shall have provision for mounting acoustic on it . (G) FUEL TANK 100 ltrs removable fuel tank shall be fabricated out of 1.6mm.Draw out type fuel tank of capacity designed by the manufacturer with fuel level indicator , with inlet and outlet arrangement , air vent & Drug plug .

ERECTION ,TESTING AND COMMISSIONING :Transporting 45 KVA DG SET to the site including loading and unloading, Insurance, Excise Duty, VAT and all other taxes etc . Postioning on the PCC platform etc .Initial filling of Diesel, Engine oil, initial charging of battery and erection, Testing Commisioning for 45 KVA DG set.

Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the generator with necessary thermal insulation.

Providing fuel oil to run the set for 8 hours on load testing and commissioning using water rheostat or suitable leading element. First charging of fuel oil to full capacity and first charging of battery while handing over to dept.

Supply and demonstration of the following safety accessories:a) 1metre x 1metre x ½ inch 11KV rubber mat – 2 Nos.b) One set of 4 Nos. 9 litre fire buckets with metal stand frame – 1 set.c) First aid box with medicines – 1 No. d) 11 KV rubber hand gloves – 2 Nos. e) 2kg capacity dry powder type fire extinguishers – 2Nos.f) Hand operated pump to transfer fuel from standard barrel to fuel tank – 1No.g) First aid chart in Tamil and English – 1 No.h) Battery water acidity tester – 1 No. i) Earth Discharge Rod - 1No. j) Danger Board - 1 No. Set

Preparation of site plan, physical layout, Electrical line schematic diagram in 10 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG Inspection and obtaining safety certificate preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in generator room and payment if CEIG inspection fees.

Providing gen set bed size of 6200 mm length x4100mm width x 1200 mm height suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation erection of 45 KVA Generator set ovwer the existing foundation and erection of generator set with proper alignment over the existing foundation to suit 45 KVA Gen set.

R.Jothi

U SEENU