14 Construction of Open Jim Near Pashu Chikitshalay MIdil school tak

earth work in excavation in foundation in ordinary soil (loam, clay or sand )including lift up to 1.5 meter and lead up to 30 meter all as per sor 251

earth work in filling cartage up to 8.0 km excluding royality

cement concrete in 1:4:8 cement and coarse sand with approved stone ballast all as per sor no 281

first class brick work in 1:4 cement and coarse sand including supply of all materials ,labour and t&p all as per 303 N.S

5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).as per dsr 5.3

12 mm cement plaster of mix 1:6 cement and c sand asper dsr 13.4.2

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Dsr 13.8 113.62

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 13.47.1 124.58

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars as per dsr 5.22.1

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) si no 10.15.1

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Providing and laying factory made 80 mm thick Interlocking cement concrete tiles (30mpa) including 25mm thick compacted bed of fine sand compacting ------- - - - -- including the cost of material, labour T&P etc. required for proper copletion of work as directed by Engineer-in-charge.All complete as per mord 1500 6.7 2

leg prees outdoor gym

chest press double

triple twister three sheets

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, Wooden painting

supply and plantation of ornamantal trees plnats grass etc as per required all complete

supply and fixing out door lights with poles wiring switch sockets all complete