Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.5 LAccepted-AOC 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹14.6 L+₹73,453 (5.32%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | 3₹15.0 L+₹1.1 L (8.24%)Rejected-AOC | 3 | Rejected-AOC 3 | |
| 4 | 4₹15.9 L+₹2.1 L (15.2%)Rejected-AOC | 4 | Rejected-AOC 4 | |
| 5 | 5₹16.9 L+₹3.1 L (22.5%)Rejected-AOC | 5 | Rejected-AOC 5 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
WELCOME MAINTENANCE AND PERIODICAL SERVICES BY USING SMART PERIODICAL METHODOLOGY IN BLDGS AT 12BRD, AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2023_MES_593998_1
GE/TKD-31/2023-24
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹50,000
Yes
10 Oct 2023
12 May 2023
12 Jun 2023
19 May 2023
10 Jun 2023
26 May 2023
Amount
Complete removing of existing treatement by scrappping with asian paints TruCare Wall sander:-L-01/H-01(Having mechanical vaccum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit havingg dia of 7"/"9" to mame the surface free from dust, loose paint etc, by skilled labour complete alll as directed.
M&L for acrylic polymer-modified cementitions high performance coating (two component) with high solid content and can be used for the both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form highly elastic form which provides elongation up to 100 as per manufacturer instructions complete alll as directed.
M&L for single component polymer modified mortar smart care repair mortar with compressive strength of 38 MPA at 28 days (ASTM C 109:99) and tensile strength of 2.5Mpa (ASTM C 109:99) and rensile strength of 2.5 MPA (ASTM C 307) up to 25mm in a single coat and max thckness of 50mm @ 53kg for 25mm thickness per sqm as per manufacturer instructions complete all as directed.
M&L waterproof cement based putty @ 1Kg (undiluted) per sq mtr. Of average thickness 1mm of asian paints or its equivalent over the plasterd/ old painted wall after scrapping Asian Paints Trucare wall sander: L-01/H-01 or equivalent (having mechanical vaccum mechanism) having RPM not less than 1500 sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free form dust etc. by skilled labour. Step 1) Mix the putty powder by adding 40-50% water and mix it with asinan Piants Trucare putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrual stell grade 45 with the mixing capacity of min 2.5Kg putty per minute).Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine(Model: EH 230DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step-3 Allow 6-8 hrs time ot dry the putty surface.
M&L for one coat of acrylic waterbased interior grade primetr @ 0.8 ltr (undiluted)/10 Sq mrs diluted with water in 1:1 ratio to be applied with fully automatic airless apray machine of paint application of Asian Paints Trucare Graco or equivalant having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subseqent quotes.
M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun wotjh a max materal hose length of 30 mtr the spray machine should be of reputed manufacturer woth pro guard technology and capability of traching pressure and paint usage and certified by paint maufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and prnetration of ditemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. NOTE:-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean envinment certifird by paint manufacturer.
M&L for two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ ltrs ( undiluted)/ 10 Sq mtrs diluted with water in 2:1 ration applied over priming caot with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min 1HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per maufacturer instruction complete all as directed.
M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 33000 PPSI and capable of operation single spary gun with a max materal hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of traching pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper ashould be able to spray in hard to reach areas and penetration of dustemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean envionment certified by paint manufacturer.
M&L for applying Two coat of distemper oil emulsion with complete removal of existing treatment on surfaces all as specified.
M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted brick work or plastered surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for providing and injeecting chemical emulsion for post construction anti-termite treatment along external wall where the acron is not provided using chemical emulsion @7.5 Ltr per sqm of the vertical surface of the sub-stucture to a contrat of 300mm including excavating channel rodding etc complete all as specified and directed.
M&L for filling voids in masonary using chemical emulsion @ one ltr per hole at a distance of 300mm center to centre (Apart) including drilling holes at 45 degree and replugging the existing floor etc complete all as specified and directed
M&L for treatment at the points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ half ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to center and sealing the same complete all as specified and directed.
M&L for trement to soil under existing floor using chemical emuslsion @ one ltr per hole at a distance of 300mm center to center (apart) inclding driling and plugging 12mm dia holes with cm (1:2) to match the existing floor etc complete all as specified and directed.
S&F in repairs of 500 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug ;and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings and including complete all as specified and as directed.
S&F in repairs of 1000 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug ;and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings and including complete all as specified and as directed.
Taking up or down existing 15 mm dia bore steel tubing/PPR pipe and connections including cleaning for refixing complete all as specified and as directed.
Taking up or down existing 20 mm dia bore steel tubing/PPR pipe and connections including cleaning for refixing complete all as specified and as directed.
Supply, fixing, jointing and testing 15 mm dia bore galvanized iron tube medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors complete all as specified and as directed.
Supply, fixing, jointing and testing 20 mm dia bore galvanized iron tube medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors complete all as specified and as directed.
Fixing only old 15 mm dia bore steel tubing and connections obtained from taking down against item No 19 in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed.
Fixing only old 20 mm dia bore steel tubing and connections obtained from taking down against item No 20 in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed.
S&F in repairs of 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.
S&F in repairs of fancy type chromium plated cast copper alloy bib taps long shank & cup 15 mm dia bore complete all as specified and as directed.
S&F in repairs of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and as directed. Make:- Marc/Jaguar/Volga
S&F in repairs of 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.
S&F in repairs of 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.
S&F in repair of CP wall mixer telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down all as specified. Make : Prayag/ Cera/Marc
S&F in repairs of CP sink mixer telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down all as specified. Make : Prayag/ Cera/Marc
S&F in repairs of CP basin mixer for 15mm dia pipe cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down all as specified. Make : Prayag/ Cera/Marc
S&F in repairs of 10 ltrs capacity PVC low level flushing cistern white, ISI marked, make as specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.
S&F in repairs of vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed.
S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed.
S&F in repairs of Health Faucet with 1.5mtr long SS tube and hook complete all as specified and as directed.
S&F in repairs of cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed.
S&F in repairs of water closet seat , white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and as directed.
S&F in repairs of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed.
S&F in repairs of PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and as directed.
Supply and fixed in repairs of 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs of 15 mm dia bore cast copper alloy chromium plated fancy type mixer pillar tape for cold & hot water complete all as specified and as directed.
S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.
S&F in repairs of brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs.
S&F in repairs of 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
S&F in repairs of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and as directed.
S&F in repairs of stainless steel kitchen rack plate rack over all size 24" x30" complete all as specified and as directed.
S&F in repairs of kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm & bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed.
S&F in repairs of brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.
S&F in repairs of toilet paper holder chromium plated fixed to wall with chromium plated brass screw complete all as specified and as directed.
S&F in replairs of 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe.
S&F in repairs of soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and as directed.
S&F in repairs Harrison curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc..including MS bracket,side knob,corner bracket etc complete all as specified
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for glazed ceramic colour tile 300mmx200mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.
M&L for glazed ceramic colour (non skid) tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm ( 300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.
S&F glazed ceramic (non skid) joint free edge cut coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400mmx400mmx8mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as dierected.
All as per item No 58 above but as on dedo skirting including 10 mm thick rendereing in cement mortar (1:4) complete all as specified and as directed.
S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, including 15 mm thick screed in CM (1:6) complete all as specified.
S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings or Dado including 10 mm thick rendering in cement mortar (1:4) etc complete all as specified.
Demolition and dismantling stone slab and tiles of any description or thickness in floors, aprons etc. complete all as specified.
M&L for 20 mm granite slab for service counter and platform over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and as directed.
M&L for Virified ceramic tiles 10 mm thick (square/rectangular) polished , area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) over 25 mm thick cemet concrete type B-1 (1:2:4) 20 mm graded aggregate) complete all as specified.
Demolition of cement concrete in fround floors and pavings not exceeding 15 cm thickness below or above GL complete all as specified.
M&L for 75 mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and fair complete all as specified and as directed.
S&F in repairs of PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .
S&F in repairs of 75 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down existing unserviceable pipe complete all as specified and as directed.
M&L for Rendering 15mm thick in patches in cement mortar ( 1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster.
M&L for Rendering 5mm thick in patches in cement mortar in (1:3) on ceiling includg taking down cement plaster complete all as specified.
M&L for preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface all as specified.
All as per item No 71 above but Three coat white wash on ceiling complete all as specified and directed.
All as per item No 71 above but two coat of cement base paint on wall all as specified and directed
S&F in repairs of corner glass shelf 12" complete all as specified.Make: crown/marc
S&F in repairs of front glass shelf 450 mm long complete all as specified.Make: Crown
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge
S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge.
S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified.
S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified.
S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm and but n,exc 4 sqm each for archives soffits, linings window boarss etc complete all as specified and directed.
S&F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified.
M&L in repair for Prelaminated particle board,18/19 mm interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.
S&F Continuous (piano) hinges MS bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified and as directed by Engr-in-charge.
S&F for hasp and stples 100mm long aluminium anodised complete all as specified and as directed by Engr-in-charge.
M&L for flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed by Engr-in-charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engr-in-charge.
Dismantling structural steel work including doors, gates, railing but excluding framed truss etc. complete all as specified.
S&F of 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified.
M/S RK Builders
GIR RAJ BUILDERS
M/s R P Enterprises
M/S Parshant Associates
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .