CONSTUCTION OF 33KV BAY AT 132KV SUBSTATION KAITHI

Amount

Sorting counting shifting to loading point loading on vehicle of structure at EFU Naini, Allahabad. Carriage of structure from EFU Naini Allahabad to 132KV S/S Kaithi (Approx distance 160Km) through vehicle to be provided by the contractor and unloading of structure from vehicle, its sorting counting and proper stacking at the premises of 132KV substation Kaithi, Varanasi at suitable place. 1. CCM-04set @ 0.389MT/set=1.556MT 2. CGM-02set @ 0.348MT/set=0.696MT 3. CPM-04 set @ 0.056MT/set=0.224MT 4. EKR- 02set @ 0.933MT/set= 1.866MT 5. BBR-02 set @ 0.548MT/set=1.096MT 6. APR-02 set @ 0.102MT/set=0.204MT 7. ALP-09 set @ 0.118MT/set=1.062MT 8. ABL-03 set @ 0.353MT/set=1.059MT

Shifting of all equipment breakers, CTs, PTs, isolators and main & auxiliary structure from store to work site and its proper stacking.

Erection of Main & Auxiliary structure consisting of Colum, beams pick mast etc required for installation of 33KV, CT and other equipments, the job consist to shifting of all material its structure parts nut bolts washers etc from store to work site distance approx 30 Meter, erection of structure as per relevant drawing and practices using flat and spring washer with each bolts and machining of holes also be done by contractor, all material shall be supplied by UPPTCL. The labour and required T&P shall be arrange by contactor at his own cost.

Erection of following equipments as per instruction manual of various equipment & technical specification

36 KV VCB

Junction box for CT

Junction box for PT

36 KV BSI

Junction box for BSI

36 KV LSI

Junction box for LSI

33.KV triple feeder C&R Panel (Numerical)

Erection of new 33KV main bus bar of single moose conductor including stringing of bus bar with disc insulators cutting bending shifting and all other associated work for completion of work satisfactorily (span length 07 meter) for each phase.

Erection of new 33KV transfer bus bar of single panther conductor including stringing of bus bar with disc insulators cutting bending shifting and all other associated work for completion of work satisfactorily (span length 7meter) for each phase

Jumpering of following equipment with the help of ACSR panther conductor including cutting binding clamping and all other associated work for satisfactorily completion. 1. Bus bar to BSI-03 No. 2. BSI to CB-03 No. 3. CB to CT-03No. 4. CT to LSI-03No. 5. LSI to Transfer bus Isolator-03 6. Transfer bus to Transfer bus Isolator-03 7. PT-03 No. 8. LA-03 No.

Laying of following sizes of control cable in the cable trenches from C/R Panel to 33 KV CT,CB,LSI/BSI /JB etc. in switch yard as per cable schedule, its saddling at every 75mm dist. with M.S. Saddle of size 25x3mm size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per tech. specification:

2 x 2.5mm unarmored

4x2.5mm – do -

6x2.5mm – do -

Termination of following size of cable as laid above as per cable schedule including making necessary holes in glands, plate or box where ever required, supply and fixing of cable glands of appropriate size. Supply and providing ferrules and No. for each core of cable and its termination with crimping type lugs of Dowell/Tension and all other associated work to complete the job satisfactorily as per tech. specification:

2x2.5mm unarmored

4x2.5mm – do –

6x2.5mm – do –

Earthing of equipments and various structure including laying of 50x6mm MS flat. Excavation of earth up to 0.6mtr below the ground level, cutting and welding with earth mat with all cost of MS flat, T&P and man power including painting with one coat of red oxide primer and two coats of synthetic enameled paint.

Earthing of trench along with 25x6mm MS flat after cutting and welding with cable rack and trench with all cost of MS flat, T&P and man power including painting with one coat of red oxide primer and two coats of synthetic enamelled paint.

Fixing of 250watt HPSV lamp fitting along with GI pipe bracket and junction box including cable laying from LT panel to junction box and junction box to HPSV fitting and termination on both end.

Fabrication of display board made of M.S. angle iron 50^x50^x6^mm, 3^ long support and M.S. board of 2^x1^ M.S. sheet 18 gauge and M.S. flat iron 25^x6^mm size 2^x1^ welded on M.S. sheet after then M.S. pipe of 1.5^^ dia. fitted around M.S. flat on the sheet board and 0.5^^ dia M.S. pipe 4^ long welded in M.S. angle iron from two places at one side and two at other to complete the display board. Digging pit size 2^x2^x3^ and grouting above board with 1:2:4 cement, ballast, sand ratio and making plinth of size 1^x2^. Board shall duly painted by yellow color and equipment name board shall be written in black.

M/S P B ENTERPRISES

ATHRAVA ENTERPRISES