Repair Renovation of Munsiff Court at Billawar.

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achived even shade.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead a) Of area of 3 sq. metres and below

15 mm cement plaster on rough side of single or half brick walls of mix 1: 4 (1 cement: 4 fine sand) (including all leads and lifts carriages of material by MT/HL)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lungs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately Sal wood

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10 kg/ sqm (4mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors windows and clerestory windows with hinges and necessary screws: ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second Class Deodar wood:

Providing and fixing 35mm thick panelled or panelled and glazed shutter for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excl. panelling which will be paid for separately, all complete as per direction of engineer-in charge Second Class Deodar wood:

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Particle board 12mm thick. a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked

Applying priming coat: b) with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade a) Old steel work (one or more coats).

Renewing glass panes, with Putty & Nails wherever necessary a) Float glass panes of thickness 4mm

Finishing walls with Acrylic smooth exterior paint of required shade: a) Old work (one or more coats applied@ 0.90 litres/10sqm)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead a) For thickness of tiles above 25 mm and upto 40mm

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: INTERNAL WORK-Exposed on wall

a) 15 mm dia. nominal bore medium

b) 20 mm dia. nominal bore medium

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: a) W.C. pan with ISI marked white solid plastic seat and lid

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required a) White Vitreous China Wash basin size 630x450mm (without taps).

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete a) 32mm dia

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing a) Rectangular shape 1500x450 mm

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms a) 15mm nominal bore

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar for an average lead of 3.00 Km. by M.T.

TILAK RAJ

M/S RASANT SINGH

Raman Kuma

RAVI KANT GOVT CONTRACTOR

Vinod Kumar