Loading…
Loading…
Tender Value
₹4.6 Cr
EMD Value
₹3.8 L
Closing Date
21 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
DYCECSP
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Similar nature of work is works for Manufacturing/casting of "Any PSC work/Any PSC Concrete Turnout/Special Sleeper casting work" as per NRHQ L.No.74-W/0/PT XXV/Similar Nature of Work/WA dated 15.07.2020.
19 conditions · 5 needing a document upload
Tenderer (Bidder) is required to submit/attach a cancelled cheque for proof of their bank's current account & other details pertains.
The tenderer whether sole proprietor/ a company or a partnership firm/ registered society / registered trust / HUF / LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Above information is required as per ACS-3 of GCC- 2022 dated 26.04.2023.
Tenderer shall submit the Notarized Copy of partnership deed of prese nt constitution of firm & also photo copy of prior partnership deed ( if there is change in constitution of firm) pertaining to the period for which the document in support of technical & financial eligibility criteria attached. If the participating firm is with different name and style, then Photo Copy of partnership deed / Sole proprietorship affidavit ( as applicable) of the firms whose credential are being submitted by the tenderer in support of their offer shall also be attached. If Participating firm is a company registered under Companies Act 1956, then copies of Memorandum of association & Article of association shall be attached. Power of attorney in favour of the authorized signatory (along with copy of Board resolution, in case of company) shall also be attached . If participating firm is a sole proprietorship firm, then Declaration in the form of duly notarized affidavit shall be attached.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
For detailed scope of work the tenderer is required to go through the uploaded document of special Conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
Execution of various activities for production of Special type of 60 kg PSC Sleepers including Wider base sleepers of Level crossing, Guard Rail, Sharp Curve, Scattered and Non-Standard T/out sleeper including upkeep of premises & office buildings at Concrete Sleeper Plant, Northern Railway, Khalispur - Varanasi
CSP-KSF_03_2025-26~NR
CSP-KSF_03_2025-26
Open
Works - General
24 Months
Varanasi, Uttar Pradesh
₹0
₹3.8 L
21 Jan 2026
26 Dec 2025
7 Jan 2026
53 items across 6 schedules · ₹4,66,18,347.42 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Execution of various activities for production of PSC turn out and non Standard Turn out sleeper for BG 60 KG (UIC) etc. including cleaning of moulds and benches for casting, applying of putty in moulds, Cutting to size & fixing of HTS wire strands, fixing SGCI Inserts in moulds after checking for correctness, fixing of wedges and barrels, fixing of bracing rods and fixing of dowels with caps, initial & final stressing of HTS wire, feeding of aggregates, admixture, water & Cement into weighbatcher and casting of benches including vibration. These casted benches are to be transfered to the steam chambers for steam curing and after demoulding of steam cured sleepers these sleepers are to be placed in water curing tanks. The rate is a complete item rate including all labour, T&P, casting & testing of steam and water cubes, cutting & grinding of inserts to suit the dimensional requirement, testing and offering of sleepers to the inspecting authority for inspection as per IRS T-45, leading, handling, re-handling and Stacking of sleeper at loading point/Stacking yard etc. All the activities are to be carried out as per IRS T-45 and directions of Engineer Incharge at CSP-NR- Khalispur. | Metre | 175000.00 | 146.73 | 2,56,77,750 |
| 2 | Execution of various activities for production of Special type of 60kg PSC Sleepers including ordinary as well as wider base- Level crossing sleeper, Guard Rail sleeper, wider gauge sleepers for sharp Curves, SEJ sleepers etc. including cleaning of moulds and benches for casting, applying of putty in moulds, Cutting to size & fixing of HTS wire strands, fixing SGCI Inserts in moulds after checking for correctness, fixing of wedges and barrels, fixing of bracing rods and fixing of dowels with caps, initial & final stressing of HTS wire, feeding of aggregates, admixture, water & Cement into weighbatcher and casting of benches including vibration. These casted benches are to be transfered to the steam chambers for steam curing and after demoulding of steam cured sleepers these sleepers are to be placed in water curing tanks. The rate is a complete item rate including all labour, T&P, casting & testing of steam and water cubes, cutting & grinding of inserts to suit the dimensional requirement, testing and offering of sleepers to the inspecting authority for inspection as per IRS T-39 leading, handling, re-handling and Stacking of sleeper at loading point/Stacking yard etc. All the activities are to be carried out as per IRS T-39 and directions of Engineer Incharge at CSP-NR-Khalispur. | Numbers | 6500.00 | 403.52 | 26,22,880 |
| 3 | Supply and fixing of 6 mm MS round steel reinforcement as per relevant RDSO drawing of PSC sleepers including straightening, cutting, bending, placing in position and binding with binding wire swg-20 all complete with all T&P, L&M in sleepers to be casted under schedule 1-NS1 against SN-1, Item No. -1 above. The rate is a complete item rate so nothing extra will be paid whatsoever the case maybe. | Metre | 175000.00 | 46.02 | 80,53,500 |
| 4 | Providing and fixing of year embossing plates "KSF-Year" after removing existing embossing plates from different moulds as per drawing No. RT/2466 at CSP/N.Rly., Khalispur -Varanasi. The rate is a complete item rate including all material required for providing embossing plates, welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Numbers | 1200.00 | 75.64 | 90,768 |
| 5 | Providing and fixing of embossing plate For Sleeper No. , RE & T/Out Name etc. after removing existing embossing plate from different type of sleeper moulds as per drg. No. RT/4216 at CSPKSF/ N.Rly.,-Khalispur- Varanasi. The rate is a complete item rate including all material required for providing embossing plates, welding, T&P, L&M so, nothing extra will be paid whatsoever the case maybe. | Numbers | 1200.00 | 87.76 | 1,05,312 |
| 6 | Supply of Wedges capable of holding 3 X 3mm HTS wire strand without permitting any slip/fail (When tensioned up to breaking load of 38.25 KN) and capable of giving service life minimum 20 uses as per drawing no. CSP/ALD/1166/01. (One set comprises of 2 Nos. wedge pieces). | Set | 48600.00 | 19.99 | 9,71,514 |
| 7 | Supply of Barrels capable of holding 3 X 3mm HTS wire strand without permitting any slip/fail (When tensioned up to breaking load of 38.25 KN) and capable of giving service life minimum 20 users as per drawing no. CSP/ALD/1166/01. | Numbers | 24300.00 | 21.61 | 5,25,123 |
| 8 | Supplying Whitee/Putty to arrest leakage of cement slurry from the ends of moulds and insert pocket etc as per directions of Engineer Incharge at CSP-NR-Khalispur. The rate is a complete item rate including all T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Kg | 500.00 | 19.89 | 9,945 |
| 9 | Providing and fixing M.S. guide rod 25 mm dia, 350 mm long and M.S. plate 40 X 65 X 10 mm with one hole 25 mm dia for rectification of stress benches as per directions of Engineer Incharge at CSP-NR- Khalispur. The rate is a complete item rate including welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Job | 50.00 | 471.93 | 23,596.5 |
| 10 | Providing & fixing of insert supports size M.S. flat 12 X 12mm, Length 80 mm (M.S. Square) as per directions of Engineer Incharge at CSP-NR-Khalispur.. The rate is a complete item rate including, welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Numbers | 3200.00 | 19.59 | 62,688 |
| 11 | Providing & fixing of vibrator cleat size 50 X 50 X 6 mm (M.S. Angle) Length 100 mm as per directions of Engineer Incharge at CSP- NR-Khalispur. The rate is a complete item rate including, welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Numbers | 500.00 | 57.96 | 28,980 |
| 12 | Providing & fixing of Top-Bottom holding box 475 X 75 X 6mm, 300 mm Long (M.S. Structural Steel) as per directions of Engineer Incharge at CSP-NR-Khalispur. The rate is a complete item rate including, welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Job | 10.00 | 302.63 | 3,026.3 |
| 13 | Providing & fixing of Channel ISME 100, 660 mm Long for mould rest as per directions of Engineer Incharge at CSP-NR-Khalispur. The rate is a complete item rate including, welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Job | 50.00 | 433.72 | 21,686 |
| 14 | Providing & fixing of Bench shoe 180 X 70 mm size, 6mm thick, length 660 mm (M.S. structural steel) as per directions of Engineer Incharge at CSP-NR-Khalispur. The rate is a complete item rate including, welding, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Job | 30.00 | 2,131.68 | 63,950.4 |
| 15 | Carrying of Buffing of moulds as per direction of Engineer Incharge at CSP-NR- Khalispur. The rate is a complete item rate including, T & P, L & M so, nothing extra will be paid whatsoever the case maybe. | Numbers | 400.00 | 140.99 | 56,396 |
| Schedule total | ₹3,83,17,115.2 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .